Wood Products Machinery: Appraisers

Latest Listings = photo available
Ref#	Type Category	Make Description
9054	SAWMILL CHIPPER	MORBARK Morbark 58” 6-Knife Chip-Pac complete with 6’ X 6’ Double Deck Chip Screen, Cyclone Overs Return, 150 HP 220/440 volt motor, and 7-1/2 HP 220/440 volt TEFC motor on screen. Chipper spout measures 22” wide and 32” diagonal with a roundwood capacity of 15”. Also includes motor starters attached to Chip-Pac for easy installation. Unit has been only lightly used and looks in good condition.
9052	SAWMILL HOG_HAMMER	APACHE Apache Model 4 Heavy Duty Hammer Hog. Direct connected 150 HP Lincoln 460V 1,200 RPM motor. 24” X 36” Top infeed opening. 1/2” screen holes. Two built-in flywheels and external flywheel. Heavy hammers and cog-style rotor discs are in nearly new condition. With 1�1/2” screen capacity is 4 TPH in wood and 12 TPH in bark.
9051	PLYWOOD SKINER/CUT_OFF	GLOBE Globe Model 16A Rollfed Skinnersaw for ripping plywood and panels to width. Serial no. 16A66116. 68” wide driven feed rolls with wheel hold downs. Individual overdriven belt drive arbors utilize standard TEFC motors. Motorized thickness adjustment. No motor
9050	WOODWORKING GLUE_SPREADER	BLACK BROS. Black Bros. Model 22-D 875 62” wide Top & Bottom Glue Spreader 62” wide working width, 8-3/4” diameter glue rollers, and 6-1/2” diameterchromed doctor rolls. Upper elevator opening 0 �" 4-1/2”, with 30” pass line height. Hand wheel on right side of machine with roll opening indicator. DC speed control drive. Serial #139342. (new in 1980) Machine rolls appear to be in very good condition, Wired for 480 volts.
9049	SAWMILL HOG_HAMMER	Williams Williams Model C17 Hammer Hog 17” X 19” top feed, bottom discharge. 40 HP, 460 Volt 1775 RPM motor for direct connect. Swinging hammers are 2-3/8” thick. Approximate capacity is 2 tons per hour of wood or 5 tons per hour of bark. Weight without motor is approximately 4,140 lbs. Has a 4” thick by 22” diameter flywheel opposite the motor and also includes the infeed chute. The progressive grates have a nominal 2” opening.
9048	WOODWORKING GLUE_SPREADER	Black Bros. Black Bros. Model 22-D 875 62” wide Top & Bottom Glue Spreader 62” wide working width, 8-3/4” diameter glue rollers, and 6-1/2” diameterchromed doctor rolls. Upper elevator opening 0 �" 4-1/2”, with 30” pass line height. Hand wheel on right side of machine with roll opening indicator. DC speed control drive. Serial #139342. (new in 1980) Machine rolls appear to be in very good condition, Wired for 480 volts.
9046	SAWMILL COMPLETE_PLANTS	USA Stud Mill Complete Klamath 7' Bandmill, 150Hp Drive Motor, Klamath 10' Log Carriage, Air Dogs, Tempisonic Set, Tyrone Carriage Drive 100Hp, Pantograph, Armstrong Grinding Room, Roll Cases. 440/3/60
9045	WOODWORKING SCISSOR_LIFTS	American 10,000 lb. Capacity 4’ x 10’ Scissor Lift. 46” final lift height. All electric with ball screw lift mechanism and 3HP(?) TEFC electric motor with pendant controls. Extra heavy construction with heavy steel caster style wheels on all four corners of base. Appears in excellent condition.
9044	WOODWORKING TRIMMER	Newman Trimmer Newman K-20 2-Saw Newman K-20 2-Saw Trimmer with Auto Set. Built in 2003. Push button control panel will set adjustable saw at 6’, 8’, 10, 12’, 14’, 16’, or 18’ and can be push button set either 1’ right or 1’ left or jogged left or right. Saw can also be manually set to any trim length. 7-1/2” HP TEFC motor drive saws while gear motors drive chains, saw set and waste conveyor. Maximum cut length is 20. Maximum thickness is 7”. Setworks accuracy is 1/32”. Feed speed is 36-110 FPM 20-60 pieces per minute. Requires 22” sawblades. Floor space is 20’8”X6’ and unit weighs approximately 3500 lbs. Appears in very good condition. See photos on our web site.
9043	WOODWORKING MISC	Tyler Tyler 80 PSI Pod Press 10’ X 5’ capacity. Side load with base rollers 24” fixed opening, air actuated, spring return press. The power pods are actuated simultaneously to create even pressure distribution over each square foot of platen area. The press has 5-1/2” stroke. Zone control option to deactivate 1’ pods on each end giving the 8’ left to right capacity, 5’ front to back capacity. (new in 1986) physical size 6’ deep X 11’ wide X 68” high, 9,200 lbs shipping weight
9041	SAWMILL HOG	Jacobson JACOBSON PULVERIZE - MODEL 2436D – 24" DIAMETER ROTOR X 36" WIDE – WITH A DIRECT COUPLED 200 HP / 3575 RPM MOTOR /460 VOLT 3 PHASE – FEED OPENING IS 16" X 36" – 3/4" SCREEN – OVER ALL LENGTH 8' 4" – FRONT TO BACK 4' – OVERALL HEIGHT 5' 6" - VERY GOOD CONDITION
9040	SAWMILL CHIPPER	Kockums/Soderhamn KOCKUMS/SODERHAMN 58 IN. CHIPPER SIX (6) KNIFE BIG MOUTH - HORIZONTAL FEED - BOTTOM DISCHARGE COMES WITH A 8 GROOVE 27 IN. DRIVE SHEAVE.
9039	SAWMILL CHIPPER	Precision PRECISION 38 IN. CHIPPER C-1011 HAS NEW FANS - COUNTER KNIVES - ANVIL AND FEED PLATE OVER ALL MEASUREMENTS IS 44 IN. FRONT TO BACK X 50 IN. LEFT TO RIGHT X 46 IN. HIGH - GOOD CONDITION.
9038	WOODWORKING CHIPPER	Precision PRECISION 48 IN. CHIPPER DROP FEED - BOTTOM DISCHARGE - SPOUT IS 16-3/4 IN. X 17 IN. SIX KNIFE WITH A KEY KNIFE CONVERSION INSTALLED COMES WITH 100 HP. - 870 R.P.M. CENTURY MOTOR - BELT DRIVEN WITH A 21 IN. SHEAVE - BELTS AND BELT GUARD. CHIPPER AND MOTOR ARE MOUNTED ON ONE COMMON SUB BASE.
9037	SAWMILL CHIPPER	Precision PRECISION 48 IN. DROP FEED – SIX (6) KNIFE – TOP DISCHARGE CHIPPER WITH A WESTINGHOUSE 50 HP. – 1770 R.P.M. – ODP MOTOR MOUNTED ON A COMMON SUBBASE – BELT DRIVEN WITH A 14 IN. DRIVE SHEAVE TO A 28 IN. DRIVEN SHEAVE – 5 “V” – SIX (6) GROVE DRIVE BELT; HAS A 12 IN. DIAMETER TRANSITION ON THE DISCHARGE AND APPROXIMATELY 3 FEET HAVE BEEN ADDED ON TO THE INFEED SPOUT. SPOUT OPENING WILL ACCOMMODATE An 11 IN. ROUND WOOD OR UP TO A 24 IN. WIDE SLAB. THE DISK RUN OUT IS WITHIN A .005 TIR – THIS MACHINE IS SERVICEABLE HOWEVER WE WOULD RECOMMEND A NEW FACEPLATE.
9036	SAWMILL BARKER	Cambrio KOCKUMS 24” 5-TOOL HIGH SPEED HYDRAULIC DRIVE CAMBIO RING DEBARKER. DIRECT HYDRAULIC DRIVEN FEEDROLLS ELIMINATE RIGHT-ANGLE GEAR BOXES. RING HAS BEEN CONVERTED TO AIRBAG STYLE BY LINDSAY AS WELL AS THE TOOL ARMS AND TIPS. INCLUDES HYDRAULIC PUMP PACKAGE, INFEED SHORT LOG HOLD DOWN ASSEMBLY, AND LOTS OF NEW SPARE PARTS. FEED SPEEDS UP TO 220 F.P.M. WILL DEBARK LOGS FROM 31/2” TO 24” DIAMETER AND DOWN TO 8’ LENGTHS. RING DRIVE MOTOR IS 75 HP.
9035	SAWMILL BARKER	Nicholson NICHOLSON 22" MODEL A-5 DEBARKER – LEFT HAND, REMOTE AIR SEAL TOOL ARM CONTROL - 6 TOOL ARMS – 300 PLUS FEET PER MINUTE – REPLACEABLE FIBER GUARD FEED ROLLS – ALL AIR CYLINDERS HAVE BEEN REBUILT – NEW ASTOLOY MAIN FEED COLUMNS – RING HAS BEEN DISASSEMBLED – INSPECTED AND REBUILT WITH NEW BUSHINGS – SEALS, BELTS AND MAIN RING BEARING CHECKED – 100 HP RING DRIVE – TWO SPEED FEEDWORKS 40 HP AND A 30HP – RING SLIDE OUT - ANY PARTS THAT DID NOT HAVE A 80% OR GREATER SERVICE LIFE HAS BEEN REBUILT OR REPLACED – GEARS ARE 80% PLUS. ALSO INCLUDED IS PLC WITH PROGRAMMING – ALL ELECTRICAL TO A MAIN "J" BOX – TWO DAYS START UP ASSISTANCE.
9034	SAWMILL BANDER	Timber Conversions Timber Conversion, Inc. Model TS-5454-PS Banding System, built in 1980. Includes top compression, side compression, strap feeder and end squeeze up for up to 22’ long packages. Does not include hydraulic power unit. Both end gates lift for end loading packages.
9033	WOODWORKING BAG_HOUSE	Murphy Rogers Murphy Rogers Model MRM-10-2D Dust Collector S/N 1451. 7-1/2 HP motor 230/460V 3450 RPM. Inlet diameter 10” round, and outlet size 9-1/4 X 11-1/4 with a 20” diameter X 5’ silencer. 30-Bags-6” dia. length approx 5’. Includes lots of good piping and lines available. Dust drops into two 55 gallon barrels. This is rated 2500 to 3500 CFM at 9” to 4” WG. Excellent condition.
9032	WOODWORKING BAG_HOUSE	Rees REES Model CX-1030-4 Dust Collector Unit.10 HP 3 phase TEFC 1750 RPM motor v-belt driven Blower Unit with magnetic starter. Four (4) polyester sateen filter bags with 128 sq. ft. filter area. Four (4) 55 gallon plastic bags storage units (can use 55 gal drums not provided).
9031	WOODWORKING BAG_HOUSE	Pangborn Pangborn Baghouse-Filter. Has forty nine 4” dia. by 80” long bags for approximately 340 sq. ft. of cloth. Dirty air inlet is 12” dia. Includes 10 HP V-belt driven fan. Unit was originally mounted against a wall so it is equipped with a back support and one set of front legs. Bags are easy to access via front opening doors. Cleaning is by shaker. Appears to be in good condition.
9029	SAWMILL Chain_Transfer	Rex Roof top - camel back chain, plastic (NOMAR) 130ft
9028	SAWMILL Chain_Transfer	Rex H-78 Rolltop chain, Plastic (non-mar) - 880 ft - excellect condition
9027	WOODWORKING MISC	P & H P&H Timber Inciser. Will incise timbers up to 18" wide 14" thick, pass 21" wide by 17" thick 12" air cylinders with 3" ACME thread stroke limiters for size setting 48" circumference heads with 20 rows of teeth. Powered by 25 hp, 460 volt, 1200 rpm motor with belt drive to lineshaft Heads are lineshaft driven thru 90 degree gearboxes for low maintenance Mounting: six 1" thick feet with mounting holes Size adjustment: 1 hp, 460v, right angle gear drives (gear motors are both missing, sold) Weight: about 10,000 lbs Length: 108" Width: 100" Height: 100"
9008	SAWMILL HOG	Montgomery ONE MONTGOMERY BLO-HOG – MODEL HD-26 – 17-40 FAN DISCHARGE -4" X 36" FLYWHEEL – 26" WIDE THROAT OPENING – RECONDITIONED WITH REBUILT BREAKER RINGS – ANVILS AND TEETH. NEW SPHERICAL ROLLER BEARINGS AND HOUSINGS – SHAFT HAS LESS THAN .003 RUN OUT – ALL CASINGS HAVE A 90% OR GREATER SERVICE FACTOR. PRICE INCLUDES INFEED CHUTE.
8592	WOODWORKING PLANER_MATCHER	Yates American One (1) Used 1996 Yates A-95 High Speed 20-Knife Removable Cutterhead 6-Head Planer Matcher. 6" X 13" capacity with top and bottom profile units, hydraulic feed roll drive, right (8) feedrolls, 480V TEFC motors, 22' Double Pineapple Planer infeed table, live bridge section, air chip breakers, hydraulic roll tensioning, control console, Allen Bradley PLC, approximately ninety (90) spare top, bottom, and side quick change 20-knife cutterheads, and 16' long outfeed discharge belt. Appears in good condition
8591	SAWMILL DECK_EQUIP	L & M One Used L-M VERTICUT 2000 VPC-2000 -6-28 The Verticut 2000 saw is equipped with a 25 HP 480 volt three phase TEFC motor driving a 114” hard inlaid double ended saw bar with a spring loaded chain tensioner and an automatic oiler to lubricate the .404 pitch carbide tipped saw chain. The saw is mounted on a mandrel box that is guided by cam followers on a steel frame and raised and lowered by a hydraulic cylinder. A console with the saw controls moves with the saw assembly along a track positioned using a manual “V” wheel geared drive. The on-board hydraulic power unit has a two hp motor driving a vane pump. The saw track is 34 feet long and will cut a 26 foot package that is 48” tall and 96” wide, or multiple packages whose combined does not exceed 26 foot, while maintaining a cutting accuracy of +/- .040 inch. Machine was new in 2006 and has had very little used in excellent condition.
8590	WOODWORKING SURFACER	Buss One (1) Used Buss Model 88 7" X 30" Motorized Double Surface Planer, S/N 6332, equipped with Newman Whitney "Quiet Cut" Carbide Spiral Cutterheads. Furnished complete with two (2) sets of new carbide knives and screws valued at over $9,000., two (2) standard knife cutterheads in boxes, carbide grinding equipment, bottom head roll-out cart, and some spare parts. Top head motor is 25 HP, 3540 RPM, 208/220/440, 3-phase, bottom head is 15 HP, 3520 RPM, 205/220/440, 3-phase. Variable speed feed from 35 to 105 Feet Per Minute. Individually spring loaded infeed roll sections allow for feeding multiple or irregular pieces. Unit will surface pieces as thin as 1/16", as short as 14" non-butted, and 4" butted. Floor space required is 98" X 78" with approximate weight of 11,500 lbs. The "Quiet Cut" System typically requires jointing only once every 3-months, grinding (sharpening) every 6-months, and replacement every 5-years. Staples will not damage these knives. Current new approximate cost to convert a 30" Double Surfacer to "Quiet Cut" heads is $ 21,000. This Surfacer appears in very good condition and was recently in service.
8589	SAWMILL DECK_EQUIP	L & M One (1) Used L-M Equipment Model HC 150 Deck Saw. Includes 15HP 440 volt motor, DE bar with 66” clearance, 1/2HP hydraulic pump with valves, chain oiler with reservoir and pump, all mounted on common base. Appears in very good condition
8588	SAWMILL RESAW_SAWMILL	Salem SALEM 6' LH Temposonic positioned high strain resaw, TOSHIBA 200 hp/1180 rpm
8588	WOODWORKING MOULDER	All Makes and sizes In stock: 1,000 used cutter heads, for YATES American, Woods, Mattison, Weineg, Wadkin. Planer and Moulder heads
8587	WOODWORKING SURFACER	Buss Buss Model 55 14” X 59” Beam Planer, equipped with 14” tall spiral carbide cutterheads to handle 4-side surfacing up to 14” X 59” beams. Top and bottom cutterheads are 3-knife units each driven by 50 HP 3,450 RPM 440 V 3-Phase motors. Sideheads are driven by 20 HP 440 V motors. Lift base assembly adjusts height of planer to maintain a constant pass height through planer and rollcases. Dust collection hoods are furnished for all heads. Includes motor control center with starters for surfacer, sidehead equipment, and feedrolls. Side mounted powered rubber rolls help pull beams out of sidehead assembly. Package also includes 95’ non-powered rollcase and 88’ powered rollcase with drive motors.
8586	SAWMILL TRIMMER	Irvington Moore One (1) Used Irvington Moore Model 62 3-Saw 10’ PET (Precision End Trimmer). Right hand with even ending rolls, 5-chainways, two (2) 10 HP 3,450 RPM TEFC motors, 24” sawblades. All three saws are moveable. Trimmer appears in excellent condition
8585	SAWMILL CHIPPER	Bush One (1) Used Bush, Heavy-Duty Lilly Pad Chipper. 67" x 34" opening. Falk gearbox, but without motor, requires 75-100 HP. Capacity is up to 16-units per hour. Drum looks in good condition.
8584	SAWMILL CHIPPER	West Salem Machinery One (1) Used West Salem Machinery 58” 8-Knife Horizontal Feed Bottom Discharge Wastewood Chipper, S/N 102192, built in 1992. 20” wide X 22-1/2" tall spout. Chromed face plates and knife clamps. Good disc. Includes a large supply of rebuilt and new spare parts
8583	SAWMILL CHIPPER	Morbark One (1) Morbark 48” Chip Pac One-Piece Chipping and Screeni48” horizontal feed top discharge 3-knife chipper, new 5’ diameter cyclone, and 5’ X 5’ rotary chip screen. System will produce 5 to 8 tons per hour from logs up to 11” diameter or slabs up to 17” wide. 60 HP 230/460V electric motor on chipper, 2HP on screen. Chip Pac has new anvils, feed plate, and has been checked for disc run out and bearingsng System, Model 3-48,
8582	SAWMILL BANDER	MacFab One (1) Used MacFab 8' to 24' Lumber Package End Squeeze, Model AE44-34, Serial No. 3706. Unit is in good condition and complete, except for gate latch, squeeze cylinders (4), moveable gate lift cylinders (2), and hydraulic power package
8579	SAWMILL CHIP_BIN	Western Two (2) Western Pneumatics 30-Unit Truck Loading Chip Bins. Complete with 5HP HPU. Excellent clam-shell doors. Needs paint but appears in good condition.
8578	SAWMILL CHIPPER	Carthage/CM&E Whole log Chopper-Carthage-CM&E 96"-800 Hp motor & starter 2300 volt Prim. Just ot of service, hor feed, bottom discharge. 70 ton per hour.
8575	SAWMILL BANDMILL	Salem Salem Bandmill 6’ High Air Strain Left Hand (can be converted to Right Hand) Heavy cast high strain wheels with top rim 1-3/16” thick. built in 1979. Has only been used a few years and looks in very good condition. Strain is 30,000 lb factory air bag. Motorized upper guide and top wheel lift. Drop in pressure saw guides.
8573	SAWMILL HOG_GRINDER	FINK New FINK WOOD GRINDERS 370/400 suitable for trim ends and strips. Main drive motor 120 RPM Rotor Motor 20 HP Feed Motor infeed 2 HP infeed opening of grinder 15 ¾ inch Number of infeed rolls 3 driven rollers (2 upper, 1 lower) Rotor diameter 14 ½ inch,Screen size ¾ inch. Output per hour approx. 40 to 80 cf/hour. Infeed vibrating conveyor, 16 ft length, electric motors with gear reducers (no hydraulics!!) Machine controls Siemens PLC Siemens Electric Components Baldor Motors Located in BC
8570	SAWMILL FORK_LIFT	Hyster Hyster Model S-60 80B 6,000 Lb. Capacity Propane Powered Fork Lift. Solid tires, side shift, new seat.S/N B4D1723N.
8568	WOODWORKING RIPSAW	Mattison One (1) Used Mattison Model 202 Fast Feed Straight Line Ripsaw. Single saw unit will handle stock down to 7-1/2"in length, up to 4" thick, and of any width out side saw and up to 24-1/2"inside saw. Takes up to 14" dia. Sawblade on a 1-1/2" dia. Spindle. Feed speeds from 62 to 186 feet per minute. Arbor motor is 20 HP, 3,600 RPM, 220/440 Volts, 3-phase.
8568	WOODWORKING RIPSAW	Ekstrom Carlson One (1) Used Ekstrom Carlson Model EE Straight Line Chain Feed Glue Join Edging Saw. 30 HP Saw arbor motor. Maximum thickness 31/4" with 16" dia saw blade (no blade). 5 HP feed motor with feed rates infinitely variable to 280 FPM. Triple lower infeed rollers are chain driven and are adjustable from zero to 5�. Elongated pressure bar housing assures the proper guidance across the entire table length. Rollers are spring loaded with one inch yield. Dual position and lubrication system, two outfeed rollers.
8567	SAWMILL BANDMILL	Kockums Kockums (L&B) 7’ H. S. A. ( High Strain Air ) Right Hand* Double Cut Bandmill S/N 8935-0127, Built in 1989. 44,000 lb max strain. 11-3/4” wide wheel faces with top wheel measuring more than 1” at edge of rim. Upper and lower pressure saw guides with powered upper guide lift. Motorized upper wheel lift. No clearing belt. 6” riser in column to increase maximum depth of cut to approximately 59”, with 45” from saw to front of column. Photos on the way.
8566	SAWMILL GRINDER_SAW	Armstrong Armstrong Late Model No. 4 Right Hand Automatic Bandsaw Sharpener complete with motors, starters, set of cams, set of post brackets, heavy duty rocker arm assembly, carbide face plate, “Sidewinder” feed finger, and a “Proctor Roll” tension roll unit to help prevent saw cracking. Will handle saws from 8” to 16” widths.
8565	SAWMILL GRINDER_SAW	Armstrong One (1) Used Late Model Armstrong No. 2 Left Hand Automatic Bandsaw Sharpener, for saws up to 8” wide. Complete with a set of post brackets, motors, starters, and one set of standard cams.
8564	SAWMILL GRINDER_SAW	Armstrong #4 One (1) Used Armstrong No. 4 Right Hand Automatic Band Saw Sharpener. Complete with motors, starters, carbide face plate, “Sidewinder” feed finger, one set of cams, and a set of post brackets including one automatic.
8563	SAWMILL GRINDER_SAW	Armstrong One (1) Used Armstrong No. 6 Motorized Bandsaw Stretcher Roll. Complete with steel base, plain bearings, gearmotor and new or reground rolls.
8561	SAWMILL RESAW_HORZ	Brewer Brewer Resaw (2) head horizontal band resaw, Model BR-2B 2000 with 6" feed belt & return belt, hydraulic unit and controls
8560	SAWMILL CHIP_BIN	Peerless Peerless 30 unit chip bin, with leveling auger, hydraulic power unit, and small cyclone.
8559	SAWMILL RESAW_ROLL	Producto Producto Model 76 (circular) center split resaw, with 20' infeed conveyor.
8558	SAWMILL RESAW_HORZ	Baker Baker single horizontal Resaw c/w 6" return belts, transfers, de-duster.
8555	SAWMILL EDGER	Schurman One (1) Used Schurman Top Arbor 2-Saw 4" X 24" Recovery Edger complete with 12' infeed table, outfeed picker belt, controls, and TEFC motors. Arbor drive is 100 HP. Feedrolls are 2-speed 71/2 HP
8554A	SAWMILL HOG_GRINDER	West Salem One (1) Used 2003 West Salem Machinery (WSM) Model 1652 Continuous Horizontal Feed High Torque Pallet and Wood Waste Grinder. Continuous horizontal infeed easily handles long material including pallets, slabs, edgings, veneer, and panel trim. Power feed (5 hp) roll mechanism provides metered feed. Four sided cutters are tough enough to handle nails, are easily replaceable, and stocked at factory. 16” diameter cutting drum driven by 60 or 75 HP, 1200 RPM motor providing a cutting drum speed of 345 RPM. Includes starting panel.
8550	WOODWORKING PLANER_MATCHER	Friulmac Randomat One (1) 2003 Friulmac Randomat-E Inline End Matcher. High speed CNC controlled end matcher. 9-13/16" X 1-3/16" maximum stock capacity. 208 V 3-phase. Feed speeds to 12-pieces per minute of random length material. Recently inspected by Friulmac technician and deemed 100% functional. Appears in near new condition. Includes more than $40,000. worth of Dehart carbide tooling and cutterheads.
8545	WOODWORKING COMPLETE_PLANTS	Stetson Ross One (1) only complete planning mill:Five arm tilt hoist, 30ft infeed deck, S/R heavy duty feed table, Stetson-Ross 6-12-A1, 16 kn. Double profile Planer, in-feed mrt, slow dn belt, green chain side heads/spare profiles, MCCs, Starters, In operation, well maintained.
8544	WOODWORKING TIMBER_SIZER	Yates American Timber Sizer Yates Timber Sizer, 16 X 30" Balll bearing, Motorizer Side heads, 100 Hp drive
8542	SAWMILL MISC	Ford Ford Model A, 1929, fresh paint and interrior, Rumble seat,
8538	SAWMILL BANDER	Sweed Sweed Machinery Bander Chopper, Gold Hill Oregon Plastic or metal strapping.
8479A	SAWMILL CHIPPER	CM&E One (1) Used CM&E Drop Feed Top Discharge 10-Knife Rechipper. Also suitable for small trim blocks. Will blow chips up to 300 feet and handle 12 units per hour. Direct coupled to 75 HP, 1200 RPM, 440 Volt drip-proof motor. Appears in good condition.
8263K	WOODWORKING BAND_SAW	LOBO LOBO 18” HEAVY DUTY BAND SAW One (1) NEW LOBO 18” HEAVY DUTY BAND SAW Model BS-0181 Features: • Safety foot brake. Sealed long life ball bearings. Precision ground cast iron rip fence • Large precision ground cast iron table. Magnetic control for overload protection • Excellent cutting power for wood or similar materials. • Turnning wheels are equipped with vulcanized rubber tires and are precisely balanced for smooth and accurate cutting. • STANDARD EQUIPMENT: TEFC motor, Magnetic switch, One saw blade, Bottom Wheel Cleaning brushes, High precision fence SPECIFICATIONS: Cutting Capacity (H x W)9-3/4" x 17-1/2"; Table Dimensions 18" x 18"; Table Tilting 10 L / 45 R; Wheel Diameter 18"; Blade Speed 3300 RPM; Motor (230 V) 1-1 /2 HP 1 PH; Saw Blade Size L x (W) 133"x(1/4"~1-1/2"); N.W. 350 LBS; G.W.420 LBS.
8256K	WOODWORKING RIPSAW	LOBO One (1) NEW 12” SINGLE RIP SAW Model No: TRS-0012 Main Motor 10 HP; Feed Motor 1 HP; Feed Chain Width 6"; Automatic Lubrication YES; Minimum Work Piece Length 12".
8249K	WOODWORKING MOULDER	LOBO One (1) NEW 4 SIDE FEED THROUGH MOULDER Model No: SM-236C, 9" - 6 SPINDLE . Features: • Hard chrome plated table for maximum wear resistance. • Fully enclosure safety guard reduces noise and completely prevents chips splashing. • Anti-impact plate for over-width and over-thickness protection. • Oversized top and bottom rollers run synchronized, ensuring smooth feeding. • FRP plastic steel safety guard features maximum durability and impact resistance. • The Three independent section pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect. • The smooth initial feeding of the stock is achieved by the independently powered infeed rollers. • Exclusively designed template inserted pressure plate suits various stock thickness and profile variations. • Special pressure plate adapted with table feeding roller design, provides smooth and precise cutting of dry and wet wood, reducing the possibility material jams. • The machine base is one piece coated from high quality cast iron (FC-25) for maximum stability of structure. • Base is machined by CNC machine equipment to assure the utmost working accuracy. • The first bottom horizontal spindle can fit with a trimming cutter for trimming a groove at the work piece side to achieve perfect straightness. • The specially designed short stock feeding mechanism combined with auxiliary pressure wheels permits the machine to perform machining on extra short stocks. • All spindles are precision constructed and especially heat treated to provide maximum cutting stability and permanent accuracy. • Each spindle is provided with a mechanical digital read out, that giving accurate adjustment. • Every cutter spindle can be adjusts" up and down " and " in and out" for quickly setup. • Industrial full power motor for maximum cutting capacity. • Precision sealed long life high speed ball bearing. SPECIFICATIONS SM-236C Max. (Min.) Working Width 9" (3/4"); Max. (Min.) Working Thickness 4-3/4" (5/16"); Min. Working Length 9½"; 1st Spindle Horsepower 10 HP; 2nd, 3rd Spindle Horsepower 10, 10 HP; 4th, 5th, 6th Spindle Horsepower 15, 15, 15 HP; 7th Spindle Housepower ~ Feed Motor 7½ HP; Elevation 1½ HP; Spindle Diameter 40 MM; Cutter Speeds (RPM) 6500; Variable Feed Speeds (FPM) 16 ~ 82; Cutterhead Diameter 1st Bottom Head 4" ~ 5"; 2nd ,3rd Vertical Head 5" ~ 6-1/4"; Top Head 5" ~ 7"; Last Bottom Head 5" ~ 7"; Pneumatic Air 90 PSI (CFM) 5; Dust Outlet Diameter 5" x 6; N.W. (LBS) 9800; G.W. (LBS) 10700. In stock and Ready to Ship Today
8248QQ	SAWMILL STACKER	USNR LUNDEN One (1) Used USNR Lunden 16’ Sticker Stacker Right Hand. 5 Strand Infeed Deck. Hoist Is Hydraulically Raised And Lowered With One Cylinder That Is Chain Driven. Outfeed Deck Is 3” Pitch Heavy Chain With Heavy Duty Syclo Drive. Stacking 7 Ft. Wide Packages Twenty Four Layers High With ¾” Sticks. All Electrical Needed To Run The Machine Is Included. Two Men And Would Stack Approximately 400,000 Ft. Of Lumber In Eight Hours, Using 16’ And Shorter Lumber. Offered In Place With A Dismantle Crew.
8247K	SAWMILL RESAW_HORZ	LOBO One (1) NEW HORIZONTAL BAND RESAW, Model No: BS-1212HR, 12" X 12" It is equipped with a digital controller for convenient and accurate thickness setting... The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts. Variable feed The cast iron saw blade wheels. Tilt 30 Degree Feed Speed (Variable) 20 ~ 90 FPM; Drive 15 Hp; Saw Blade Lift Motor 1/2 HP; Feed Conveyor Motor 1 HP; Dust Hood 4" x 1; Machine Size 88" x 85" x 74", N.W. 2500 LBS.
8246NN	SAWMILL TRUCK_DUMPER	Shop Fabricated One (1) Used Truck/Trailer Dumper. Platform 10’x60’. The I Beams Are 24” Beams. Deck Is Diamond Plate Steel ¼” Bolted. Dumping Height 62 Degrees. 50 Hp Vicker Pumps. Back Bumper/Stop Is Adjustable Up And Down With Hydraulic Cylinders.. Back Stop Includes Hydraulic Powered Vibrator. Hydraulic Power Pack.
8200P	SAWMILL AIR_COMPRESSOR	QUINCY NORTHWEST Quincy Northwest Rotary Screw Air Compressor Assembly, Model QNW-500-D3, With Air-Cooled Lubricant Cooler, Complete With A 150 HP, 1800 RPM, C-Flange Mounted, 3/60/230/460 Volt, Open Dripproof, Motor. The Assembly Is Complete With Fill Of Synthetic Compressor Lubricant And Standard Equipment. Includes Air-Cooled Aftercooler With Moisture Separator And Automatic Condensate Trap, Mounted, Pre-Piped And Tested. And MOTOR CONTROL: Magnetic X-Line Starter, 150 HP, 3/60/460 Volt, In NEMA 1 Enclosure With Operator Switch In Compressor Panel, Mounted, Wired And Tested. Also Unloaded Horsepower Constant Speed Control Package Complete With Timed Shutdown And Automatic Restart, Installed. Shipping Weight Is 4,800 Lbs.
8172M	SAWMILL BLOWER	ANDERSON One (1) Used Anderson Material Blower , size 60-CCW, direct drive, Allis-Chalmers 100 HP, 1180 RPM, inlet - 24", outlet - 22"x60", wheel size - 54"
8163C	SAWMILL BANDMILL	KOCKUMS KOCKUMS/L&B Twin Band - 6' high air strain bandmills on common base. Features 24 inch wide x 8 feet long off-bearing belts; pneumatic lift top guides; wheel guards with pneumatic tilt cylinders; 5 HP upper wheel hoists; common base approximately 7' x 30'; hydraulic linear positioning cylinders with servo valves; 200 HP 1200 rpm electric motors and belt sheaves; 50 HP Activation hydraulic pump unit. Runs 12" wide bands.
8160H	WOODWORKING SANDER	Timersaver One (1) Used TIMESAVERS 300 Series, model 343 Sander- 4 KAICBT-3 Top Heads, 1 50 HP Helical planer Head , 1 40 Hp sanding drum, Vacuum Bed, AB1336 Plus
8159H	WOODWORKING SANDER	Timesavers One (1) Used TIMESAVERS 300 Series, model 343 –SANDER 4 KAICBT-3 Bottom Heads, 1 -50 HP Helical planer Head , 1 -40 Hp sanding drum, Vacuum Bed, AB1336. 43” x 75” Abrasive Belts. Feed Motor 220-440/3/60.
8111F	WOODWORKING SURFACER	PORTER One (1) Used Porter 710 36" x 7" Single Facer Planer, ball bearing, l5 H.P. 220/440 direct to the 4-knife bottom cutterhead. Wt. 6500 lbs. Overhead roller chain feed system with steel cross grids with spring-loaded plunger-type fingers for reduced stock breakage. With a 1-l/2 H.P.. D.C. gearmotor drive, with S C R controller for speeds of 0-100' per minute. Equipped with push button controls and starters now on 440/60/3.
8020A	SAWMILL BANDMILL	Salem Salem 5’ Right Hand Air Strain Bandmill. Built in 1978. Motorized upper guide and wheel lift. Pressure bandsaw guides. Solid cast 8” wide upper and lower wheels in near new condition. Upper wheel measures 1-1/8” trick at edge of rim.
8008E	SAWMILL BARKER	NICHOLSON One (1) Used 35" Nicholson A1 Rebuilt Debarker. Six (6) tool air seal ring, 100 HP ring drive, 30 HP feedworks drive. Two (2) infeed bedrolls c/w two (2) overhead pressrolls c/w lift cylinder Two (2) outfeed bedrolls c/w two (2) overhead pressrolls c/w lift cylinder Hydraulic power unit.
6658F	WOODWORKING MOULDER	Sicar Used Sicar SCP 18H5, five-head through-feed moulder. Capacity: 7" wide x 4.5" high; S/N: 15/27. Electrical controls: 440 volt/60 cycles/3 phase. Weight: 3,500 lbs. (1985). Cutting Sequence: Bottom, right, left, top, second bottom. Horsepowers: 7.5 HP first bottom, right & left share 15 HP, top & second bottom head share 15 HP. Spindles: 6,000 RPM, 1-1/2" diameter where heads go. Feed-Works: 2 HP feed motor, cardan arrangement, with variable speeds 25-125 FPM (estimated). All adjusting shafts have calibrated dials to facilitate precise and quick changes. Height adjustments are made via control console inputs and gearmotor/hoist drive. Roll tension is by pneumatic cylinders, with steel top infeed and center section rolls and phenolic outfeed rolls. Six foot long straightening table. Includes some dust hoods.
6656E	SAWMILL BARKER	Nicholson Centering infeed conveyor on air bags with independent overhead tires - 6 tool rotor with air bags (c/w 2 sets cedar tool arms, 1 set standard tool arms) - Not available until June30, 2005 - c/w service and parts manuals
6654A	SAWMILL TILT_HOIST	Salem Used 4-Arm Hydraulic Operated Lumber Package Breakdown Tilt Hoist. 30 HP 230/460 Volt TEFC powered hydraulic power unit. Arm spacing as you face the hoist is 6’, 4’ & 4’ with a maximum package size of 57” wide and 65” high. Ground to top of sail (arm) in down position is approximately 40”. Overall dimensions are 10’-4” wide, 18’ long, and 8’-6” high
6651A	SAWMILL EDGER	Schurman One (1) Used Schurman Model 6TA48, 6”x48” Combination Edger. Edger was reconditioned and updated by Schurman/USNR in 1986. Edger rolls are completely split on both top and bottom with separate drives. Seven (7) bedrolls are knurled and chromed. Two (2) powered press rolls (per side) have replaceable Coleman teeth and are also chromed. Three (3) saw hydraulic linear positioner setworks box on top of edger was added in 1986, and includes laser light brackets no controls. Arbor is splined replaceable sleeve. Gang side is on right with nominal 2” babbitt guides. Shifters are on left with horseshoe-style guides. Includes 20’-long infeed table built new in 1986, also split, with cross chains, flippers, and shifting pin stops. 20’ outfeed table for board side only has shifting picker. Edger appears in very good condition. See photos on our web site. Inventory No. 8111. Board bay is 27” and gang is 25”-wide. Board side feeds at 400 FPM, gang at 200 FPM.
6648A	WOODWORKING SANDER	Kimwood One (1) Used Kimwood 8-Head Panel Master Sander. 66 inch width capacity. Left hand flow. Primary and Secondary heads are opposed contact type. 200 HP and 150 HP. Finish heads are offset combination type. 150 HP and 125 HP. Maximum opening is 11½”. Manufactured in 1987. Excellent machine for MDF or Particle Board application
6647A	WOODWORKING SAW	Kimwood One (1) Used Kimwood/Tri-State Model T-36-4 36" Single-Band Tilting Roll Feed Resaw, Will either self-center or gauge saw. Feed rolls tilt up to 45-degrees. Feed speeds from 10 to 250 FPM. 3-1/2"-wide wheel for 4"-wide band or narrower. Maximum capacity is 6"- x 8"-wide stock. Usual saw kerf is 1/16". 25 HP, 220/440-volt motor 50/60-cycle. Feed rolls driven by two 1 HP, DC variable-speed motors powered by SCR control unit
6645A	SAWMILL STACKER	COE One (1) Used COE Right Hand 6’ to 24’ 5-Arm Hydraulic Operated Lumber Stacker. “Hoistless” style designed to operate at a sustained rate of 5.5 cycles per minute on packages up to 54” X 54” X 24’. Maximum course or layer weight is 1,900 lbs. Includes 5-Strand outfeed package discharge deck, stacker controls, even-ending chain assembly, catwalks, and stairs. New never used.
6567A	SAWMILL CHIPPER	Precision One (1) Used Precision 75”, 6-Knife, Horizontal Feed, Bottom Discharge Wastewood and Whole Log Chipper. Will accept 22” round log. Capacity of approximately 100 metric tons per hour, with spout 3/4 full. Spout is 22” x 27”. Weight is 15,500-lbs. Operating RPM is 560. Requires 500 HP for maximum production, motor not included.
6561E	WOODWORKING RESAW_ROLLFEED	McDonough One (1) Used 54" McDonough Resaw. 2) Available
6560	SAWMILL DECK_EQUIP	Cornell Cornell Cut to Length saw with infeed deck and descrambler. Runs great with brand new motor.
6559	SAWMILL EDGER	Cornell Cornell double arbor double bay gang with sizer
6557	SAWMILL MISC	Newman Newman Notcher with strapping notcher
6544A	WOODWORKING FEED_TABLE	Stetson Ross Stetson-Ross Single Pineapple Planer Infeed Table Used Stetson-Ross Single Pineapple Planer Infeed Table for material up to 8” x 15” x 20’. Spiral table rolls. Adjustable shear. Five (5) 6’-long pull-in chainways and drive to bring material onto feed table.
6543A	SAWMILL PLANER_MATCHER	Yates American One (1) Used Yates-American F-31 20’ High Speed Double Pineapple Infeed Table. 14” diameter rolls. Adjustable shear. Angled belt driven table rolls. Anti-lap bar. Good for speeds to 2,000 F.P.M. No drive motor.
6540	PLYWOOD SLICER	Bamford Bamford Premier 14" x 120" line slicer · With vacuum chucking system upgrade · Drive motors and controls
6539H	PLYWOOD SLICER	Bamford One (1) Used Bamford Premier 16" x 120" Line Slicer. Hydraulic System, Steel Platform Machine Tools Safety Bars And Spare Parts. Complete With Drive Motor And Controls.
6534K	WOODWORKING SURFACER	LOBO (NEW) SPECIFICATIONS Max. Planng Width: 24" Max. Planing Thickness: 6-5/8" Max. Cutting Depth: 1/4" Min. Planing Length: 10" Feeding Speed (Variable):10'-50'per min. Cutter Head Speed:4200 RPM Number of Knives: 4 Upper Motor: 30HP Bottom Motor: 20 HP Feeding Motor: 5 HP Elevation Motor: 1/2 HP Table Size (L x W): 93" x 24" G.W.: 7700 lbs
6531	INDUSTRIAL MOTOR	Toshiba TOSHIBA 75 Hp 460 volt programmable frequency drivers (2 available)
6517A	SAWMILL CHIPPER	Nicholson 64-knife drum will produce up to 11.3 units, or 64 cubic meters per hour. Bottom screen insures against overs. 100 HP motor, 230/460-volts, with sheaves. Includes grinding fixture to fit standard grinder.
6506A	SAWMILL TRIMMER	Newnes One (1) Used Newnes 30’ Capacity High Speed Trimmer Infeed Lug Charger Table. Currently set up as left hand but could be run either way. Good condition.
6504N	SAWMILL TRIMMER	NEWMAN One (1) Used Newman KM 16 HD Five Saw Multiple Trimmer With Operators Console, 10 HP 440 Volt TEFC Motors, Trim Waste Conveyor Chain Package Deck Conveyor Belt Waste Conveyor Chain Stacking Chain Conveyor All electrical Equipment For Trimmer/Conveyors.
6501A	SAWMILL TRIMMER	L.S.I One (1) Used L.S.I., 20' Right-Hand, Air Lift Sawmill Trimmer. Individual 10 HP, 1800 RPM motors, v-belt driving 27" carbide saws on 1-15/16" arbors running at 2,333 RPM's. No controls, but does have whisker switches and laser light brackets. Also, includes infeed table
6498	SAWMILL AIR_COMPRESSOR	Kaeser 1988 model AS 35, s/n 374737, 40 HP, 110 psi, air cooled, nice cabinet.
6488A	WOODWORKING MOULDER	Vonnigut One (1) Used Vonnegut 4 ½ X4” 4-Head Fast Feed Electric Ball Bearing Moulder. Hopper in feed for stacked feeding of short material. Frequency changer for 9,000 RPM’s. Feed Speeds up to 140 feed per minute. Motors for top and bottom spindles have recently been upgraded with new 5 HP Baldor units. Sidehead motors are also 5HP. Feed motor is 4HP. Weight is 5,500 lbs. Parts are available from Diehl Machinery Co. who purchased the Vonnegut line.
6486I	WOODWORKING FINGER_JOINTER	Western Pneumatic Industrial model PNOV, 20 HP heads, 3 HP score, 7 1/2 HP Trims, 10 HP Feed, Assembly table with 3- 7 1/2 HP Trims, 24' long. Includes heads, glue system. Excellent condition.
6481	WOODWORKING SANDER	Timesaver Timesaver 352B Sander
6480	SAWMILL EDGER	PHL PHL Model E6-48-2 Edger, 2 bottom roll for outrolls, 1 Variable speed pulley for outrolls, 2 pc shift cylinder clevice for outrolls, 1 block for shift for outrolls, 1 sawguide, 6 spare saws, 1 set spare saw collars
6477	WOODWORKING RIPSAW	Yates American Yates American 341 Bandsaw
6400	SAWMILL SORTER	Irvington Moore IRVINGTON MOORE 16 tray x 225' gravity roll tray sorter, 10'-16' length, 4"-12" width capacities, 12' 8-strand infeed board waterfall, 27' 2-section, 5 & 6-strand lugged infeed transfer, (2) even end rollcases, 4-strand ladder infeed transfer to gravity rolls, tipple, 50' 4-strand lugged outfeed transfer w/tipple, HONEYWELL electrics
6393	SAWMILL DECK_EQUIP	Valon Kone Valon Kone 20' Log Singulator Model VK30-20
6376	INDUSTRIAL PRESS	Globe Globe 4' x 8' 40 opening, 4 chain.
6372	INDUSTRIAL VENEER_CLIPPER	Durand Raute Durand Raute rotary clipper 8’ Reconditioned
6367	INDUSTRIAL CHIPPER	Black Clawson Black Clawson: 78", 6 knife, top discharge.
6366	INDUSTRIAL CHIPPER	Acrowood Acrowood 72" - 6 knife bottom discharge
6363	INDUSTRIAL CHIPPER	Areosmith Areosmith Lily Pad chipper, 42" dia. drum, 26" wide. GE 100hp, 1770 @60, 1480 @50
6344	PLYWOOD MISC	GreenLee GreenLee Saw Line - Custom built feeder, vacuum, canted roll conveyor, chain fed skinner saw (GreenLee), two strand belt conveyor 36' long, saw corner, cut off saw GreenLee 8'-10' adj., belt converyor, Mor Panel two bin stacker with hoist.
6340	PLYWOOD BIN_STACKER	Morpanl Morpanl Single Bin Stacker
6339	PLYWOOD MISC	Durand Durand Vacuum Feeder
6338	PLYWOOD PANEL_SAWS	Globe Globe Vacuum Panel Feeder
6337	PLYWOOD SAW	Andrus 27" Andrus Strip Saw
6336	PLYWOOD SAW	Globe Globe 16T combination saw with drives
6335	PLYWOOD SAW	Sweed Ven Sweed Ven Core Saw
6320	SAWMILL RESAW_SAWMILL	CAE Air Strain, Temposonic Shifting, Complete With: 250 hp Motor, 250 hp Starter, Double 40 hp Hydraulic Support Unit, Shifting Top Guide, Control Console, Flare Infeed / Outfeed System, 18" x 22' Infeed Rollcase w/ Fence & Drive, 18" x 11' Infeed Rollcase w/ Fence , Drive & 3 Vertical Press Rolls, 32" x 20" Outfeed Rollcase w/ Drive & Shifting Splitter, 42" x 25' Outfeed Rollcase w/ Drive
6310	PLYWOOD VANEER_HOG	Pennisula Pennisula Hog (Veneer) 18", 25hp
6309	PLYWOOD VANEER_HOG	Pennisula Pennisula Hog (Veneer) 54", 100hp.
6300	SAWMILL HOG	Montgomery Montgomery “Punch & Die”-Style Vertical Feed Blo-Hog, 13-1/2” x 18” top infeed opening. Built-in blower top discharge. 75 HP motor. Very good condition
6272	WOODWORKING SAW	Ultimizer (2) 1995 Ultimizer 15U Optimizing Cutoff saws, full optimizing, 4 grades, 3/4"-7 1/4" width capacity, 1/4"x2" adjustable thickness capacity via push button, AC Servo feed drive, 0-600 FPM, 10hp/1800RPM motor, Lut scanning camera, replaceable chip breakers, 1500 CFM dust removal, (6) grade marking stations, 6-strand infeed transfer, powered center canted infeed rollcase, powered outfeed belt conveyor with auto kick-outs, all drives and PLC controls.
6271	WOODWORKING FINGER_JOINTER	Western Machinery 1994 Western Machinery MD FJ1542-25D RH Finger Jointer line, 2"x6" capacity, 310 FPM, with dual top and bottom trim saws, 30"x36" slat bed infeed, 12' 2-strand slat bed infeed to first section, 10' 2-strand bed feed to second section, 20' lug type pass through block transfer with brush, ABQUIP Auto Glue system, 14' block assembly section with PLS inline auto press, FLying C.O. saw, dual sizing heads, with all hydraulics, drives and PLC controls
6229YY	WOODWORKING ROUTER	Thermwood One (1) Used Thermwood 12' x 5' CNC Router, Model C55, 4 x 12HP Perske routers,Dessointer Air Drill (AFB 60) 4300 RPM, Handheld Programmer, fence locators, fence locators, OS/2 Operating System, Super Control 91000 (retro'd in 1995), Working, perfect condition.
6148	SAWMILL BANDMILL	KLAMATH Klamath 60" Vertical Band Resaw, 100Hp, 8 1/2" Wheel Face, 7/8" thick top wheel, weight strain, manual guide lift.
6147	WOODWORKING SURFACER	Woods Parting out... 465-M Heavy Duty Double Planer, 30" x 6" capacity, 60Hp top head, 30Hp Bottom head, 10-knife cylinders, rubber tire feed rolls.
6105	SAWMILL HOG	WILLIAMS Williams Hammer Hog Model KS30, 50lb hammers, 100hp motor.
5884	SAWMILL CHIPPER	West Salem Machinery One (1) Used West Salem Machinery 58” 8-Knife Horizontal Feed Bottom Discharge Wastewood Chipper, S/N 102192, built in 1992. 20” wide X 22-1/2" tall spout. Chromed face plates and knife clamps. Good disc. Includes a large supply of rebuilt and new spare parts

Back to Machinery Listings