|
|
TRIMMER  = photo available |
| Ref# |
Make |
Description |
8390LL1
|
CM Machinery Co.
|
One (1) Used Air Powered Drop 6 Saw Trimmer, CM Machinery Co.– Right Hand, 16 Foot Capacity – 20” Saws.
|
8389LL1
|
CORNELL
|
One (1) Used Cornell Trimmer, Model # STD, Sliding Right Hand. Capacity 6 - 18 foot.
|
8347FF1
|
FALCON
|
One (1) Used Falcon Precision End Trimmer, 4-Saw, 7.5HP, 18" Carbide Tooth Blades. Gear Driven Chain Feed, With Cut Parts Exiting One End And End Cuts Exiting The Other, Both By Conveyor Belt. Voltage Is 440 volt 3 Phase. Machine Is In a Plant, Under Power, But Not In Use.
|
8019BB
|
HEMCO
|
One (1) Used 24’ Hemco Planer Mill Trimmer, 13 Saw. 7-1/2 HP on each saw, RH, Depth of cut: trimming 6x6 timbers and 1x4 as well as boards. Saw spacing: 24- 1/4" dry end trimmer. No infeed or carry thru chains.
|
8157L
|
HMC
|
One (1) Used HMC ET-10 Two-Saw Trimmer (Right-Hand) – To Trim 6’ – 20’ lumber and cants up to 9” thick, 10HP Arbor Motors with 30” Carbide Saws . 5HP Hydraulic System, Pushbutton Setworks for 1’ increments . 3/60/575 Volts
|
8388LL1
|
HMC
|
One (1) Used HMC Trimmer Model # ET–10. Right Hand, two saw sliding trimmer. Capacity of 6-16’. HP per saw motor is 10 HP. Blade size is 20”. Setworks are operable. They have no waste conveyer with this machine.
|
8156L
|
HMC
|
One (1) Used HMC ET-10 Two-Saw Trimmer (Left-Hand) – Standard HMC Setworks 4’ – 16’ On 1’ Increments. Built-In Belt Conveyor with Hydraulic Drive , Leg Extensions for Built-In Belt Conveyor (41” Infeed Height) , 10HP Arbor Motors, Discharges Away From Operator. Good Condition
|
5448
|
IRVINGTON MOORE
|
IRVINGTON MOORE 20' SAWMILL TRIMMER, AIR LIFT, MOTORIZED SAWS 7-1/2 HP, HI-TECH OPTIMIZER FOR 20' LUMBER TRIMMER, INSTALLED 1994
|
8586
|
Irvington Moore
|
One (1) Used Irvington Moore Model 62 3-Saw 10’ PET (Precision End Trimmer). Right hand with even ending rolls, 5-chainways, two (2) 10 HP 3,450 RPM TEFC motors, 24” sawblades. All three saws are moveable. Trimmer appears in excellent condition
|
5071
|
L & M
|
L & M PRECISION END TRIMMER, ALLLEN BRADLY PLC SET WORKS.
6 to 16 ft.
|
6501A
|
L.S.I
|
One (1) Used L.S.I., 20' Right-Hand, Air Lift Sawmill Trimmer. Individual 10 HP, 1800 RPM motors, v-belt driving 27" carbide saws on 1-15/16" arbors running at 2,333 RPM's. No controls, but does have whisker switches and laser light brackets. Also, includes infeed table
|
8192A
|
NEWMAN
|
One (1) Used Newman Model KM-16, 5-Saw Adjustable Multiple Trimmer. 7½” HP 220/440V saw motors. Belt Conveyors for waste and trimmed lumber. Feed speed up to 60-pieces per minute. 17” diameter carbide saws will trim up to 4” thick. Trimmer will trim 18’ maximum length. No starters.
*** New arrival to yard; will be steamed cleaned, painted and test run.
|
6504N
|
NEWMAN
|
One (1) Used Newman KM 16 HD Five Saw Multiple Trimmer With Operators Console, 10 HP 440 Volt TEFC Motors, Trim Waste Conveyor
Chain Package Deck Conveyor
Belt Waste Conveyor
Chain Stacking Chain Conveyor
All electrical Equipment For Trimmer/Conveyors.
|
9044
|
Newman
|
Trimmer Newman K-20 2-Saw
Newman K-20 2-Saw Trimmer with Auto Set. Built in 2003. Push button control panel will set adjustable saw at 6’, 8’, 10, 12’, 14’, 16’, or 18’ and can be push button set either 1’ right or 1’ left or jogged left or right. Saw can also be manually set to any trim length. 7-1/2” HP TEFC motor drive saws while gear motors drive chains, saw set and waste conveyor. Maximum cut length is 20. Maximum thickness is 7”. Setworks accuracy is 1/32”. Feed speed is 36-110 FPM 20-60 pieces per minute. Requires 22” sawblades. Floor space is 20’8”X6’ and unit weighs approximately 3500 lbs. Appears in very good condition. See photos on our web site.
|
8191A
|
NEWMAN
|
One (1) Used Newman Model KM-16, 5-Saw Adjustable Multiple Trimmer. 7½ HP TEFC 220/440 volt saw motors. No saw blades. Requires 17” diameter blades to cut 4” thick material. Will trim 17’ maximum length. Feed speeds up to 60 pieces per minute. Conveyors for waste and trimmed lumber. Includes starters.
*** New arrival to yard; will be steamed cleaned, painted and test run.
|
8015E
|
NEWNES
|
One (1) Used 20' Newnes Strip Placer. Automatic strip placing. Feeds from left to right. With
strip unscramble.
|
6506A
|
Newnes
|
One (1) Used Newnes 30’ Capacity High Speed Trimmer Infeed Lug Charger Table. Currently set up as left hand but could be run either way. Good condition.
|
8497UU1
|
PRECISION
|
One (1) Used Vorwood-Precision End Trim Machine. Model #ED-8.
|
8407A
|
SALEM
|
One (1) Used Salem 20', Right-Hand Air Lift Sawmill Trimmer. Overhead-style with saws on 2'-1/4" spacing, shifting straight edge, 50 HP, 230/460-volt saw arbor drive, even ending rolls, lug charger infeed table, and heavy-duty hold down shoes.
|
2580
|
SALEM
|
24' RH SAWMILL TRIMMER WITH 75 HP LINE SHAFT DRIVE AIR LIFT ENDING ROLLS FEED THRU LUG CHAINS CAN CUT LARGE CANTS
|
8327A
|
SALEM
|
One (1) Used Salem, 16', Left-Hand, Air Lift, Planing Mill Trimmer. Saws at 0', 6', 8', 10', 12', 14', and 16'. Auto-end trim switches, but no controls. 50 HP, 1800 RPM, 230/460-volt, drip-proof, U.S. motor driving line shaft. Ladders are V-belt. Hold down shoes included. Trimmer table is loose from frame. Appears in fairly good condition.
|
Back
to Machinery Listings