TILT_HOIST  = photo available |
||
| Ref# | Make | Description |
|---|---|---|
| 5756
|
LIR
|
6 ARMS, 30HP HYD., SPACING 3' 5' 4' & 4' |
| 9010
|
LSI
|
One (1) Used 4-Arm Breakdown Hoist - Tilt Hoist.
Mechanical with 10HP 440volt brake equipped gearmotor for arms an 15HP gearmotor to drive pull-in shaft for infeed deck.
Arms are UHMW lined and entire hoist appears in excellent condition. Spacing as you face the arms is 4’, 4’ and 5’ left to right. Includes 18' long 4-strand H-82 package infeed deck with legs and bolt together construction for easy installation. |
| 8549
|
LSI
|
LSI One (1) Used New Surplus 5-Arm Hydraulic Operated Lumber Package Tilting Breakdown Hoist. No hydraulic power unit. Suitable for packages up to 54” X 54” X 24’. |
| 9002
|
Portland Iron Works
|
ONE USED PORTLAND IRON WORKS THREE ARM TILT HOIST.
71 IN. PACKAGE HEIGHT- SPACING OF ARMS LEFT TO RIGHT 0 IN. - 60 IN. - 65 IN. WITH 7-1/2 HP
1750 R.P.M. MOTOR TO A FALK GEAR REDUCER WITH 45 R.P.M. OUTPUT AND FINAL DRIVE TO HOIST WITH #140 ROLLER CHAIN. |
| 6654A
|
Salem
|
Used 4-Arm Hydraulic Operated Lumber Package Breakdown Tilt Hoist. 30 HP 230/460 Volt TEFC powered hydraulic power unit. Arm spacing as you face the hoist is 6’, 4’ & 4’ with a maximum package size of 57” wide and 65” high. Ground to top of sail (arm) in down position is approximately 40”. Overall dimensions are 10’-4” wide, 18’ long, and 8’-6” high |
| 8215R
|
SALEM
|
One (1) Used Salem 12’ - 4 Arm Break Down Hoist with Motor and Reducer. |
| 8274V
|
UNKNOWN
|
One (1) Used Four-Arm Tilt-Hoist . Four 6” Wide Arms With 5” Channel Iron Welded On Top Of Each Arm. Each Arm Is 48” Long. Outside Of 1st Fork To Outside Of 4th Fork Is 14’6”. Center Of 1st Fork To Center Of 2nd Fork Is 47”. Center Of 2nd Fork To Center Of 3rd Fork Is 52”. Center Of 3rd Fork To Center Of 4th Fork Is 69”. Vertical Arms Are 55” Tall. Drive Is A GE 5 HP At 1450 Rpm With A 57.7 Ratio Gear Reduction. |