|
|
TENONER  = photo available |
| Ref# |
Make |
Description |
8258T
|
CHALLONER
|
One (1) Used Challoner - Model Vector Double End Tenoner. 96" opening; 56" loadspace; 6-1/2" thickness capacity; each side equipped with 10 HP tilting trim saw with belt driven jump score, 10 HP high speed jump cope; 10 HP high speed cope, 1 HP wheel sanding station, 1 HP wheel sanding station, and 3 HP belt sanding station with 3" X 146" abrasvie belt; 1.5" diameter trim saw arbors; 1-1/4" diameter cope spindles; 1-1/4" diameter spindles on wheel sanding stations; wheel sanding stations are variable speed feed 500-2200 RPM; pop-up dogs on 16" centers; motorized open and close with auto controls; 3 HP variable speed feed 20-80 FPM; corrugated top feed chain; centralized dust pickup with (4) 9" dust outlets (6,000 CFM); sound enclosure.
|
8273V
|
CHALLONER
|
One (1) Used Challoner Double-End (Used For Window Parts), Model 780. Good Accuracy. Opens To A Maximum Of 86”. Four Heads Per Side: 3hp Tenon, 2 Hp Tenon, 2 Hp Cope To Tenon Or Anywhere In Between. 3 Hp Cope.
|
8264A
|
CHALLONER
|
One (1) Used CHALLONER Model 2000 Double End Tenoner. 4 Stations, 8ft Wide Opening, 64” Load Space. 1st Station: 15 HP Trim Saw Motor With Universal Mounting For Tilting. Belt Driven Jump Score Motor. 2nd Station: 7 ½ HP Top & Bottom Horizontal Tenon Motor With Top Head Tilt Table; 3rd Station: 7 ½ HP Top & Bottom Horizontal Tenon Motor With Top Head Tilt Table. 4th Station: 15 HP Belt Driven Vertical Spindle High Speed Cope Unit. 5th Station: Right Hand Side 7 ½ HP Horizontal Spindle (Stub Dado). Machine It Was The Controls With Starters Wired For 460 Volts And Includes The Dust Manifold.
|
8305K
|
LOBO
|
One (1) NEW Lobo 8'- 6 HEADS THROUGH FEED DOUBLE END Model No: SET-86DET
Features:
• The automatic high-speed through feed device allows for perfect finishing at speeds ranging from 20~66 FPM.
• Suitable for mass production of wood working factory for processing of double end cutting, tenoning, grooving, moulding, sanding.
• It is a powerful machine great for heavy-duty production.
• In addition to the double end cutting, all the settings and other processing can also be executed with highly accuracy.
• Since the machine is so versatile, we believe it should be one of the most satisfactory equipments for bulk production lumber-processing factories.
• The specially designed numeric controller allows quick setting of sizes, for the tolerance within 0.004”.
• Variable speed, through feed, wide rubber pad, spring loaded dots conveyor for the best finish selections.
• Heavy-duty powered pressure rolls at top of wide width conveyor to hold the material tight for prevent sliding during the cutting process.
• Shaper head can be move up & down, forward & backward.
• Equipped with industrial motor for full power cutting and sanding capacity.
• Trim saw heads can be tilt for different angular setup.
• Heavy cast iron base for durability usage.
SPECIFICATIONS:
Max. Working Size:
Thickness 4",
Length 96",
Miter Saw Blade 12" x 1" Dia.,
Grooving Saw Blade 8" x 1" Dia.,
Shaper Cutter 6" ~ 10" x 1" Dia.,
Feed Speed 20' ~ 66' Variable,
Motor 3 PH, 220/440 V,
Trim Saw 3 HP x 2,
Grooving 2 HP x 2,
Vertical Shaper 7-1/2 HP x 2,
Feeding 2 HP x 1,
Width Setting ½ HP x 1,
Machine Size (L x W x L) 14' x 9' x 5',
N.W. 9800 LBS,
G.W. 11000 LBS.
|
8303K
|
LOBO
|
One (1) NEW LOBO 4'- 6 HEADS THROUGH FEED DOUBLE END Model No: SET-46TS
Features:
• The automatic high-speed through feed device allows for perfect finishing at speeds ranging from 12 ~ 52 FPM.
• Suitable for mass production of wood working factory for processing of double end cutting, tenoning, grooving, moulding, sanding.
• It is a powerful machine great for heavy-duty production.
• In addition to the double end cutting, all the settings and other processing can also be executed with highly accuracy.
• Since the machine is so versatile, we believe it should be one of the most satisfactory equipments for bulk production lumber-processing factories.
• The specially designed numeric controller allows quick setting of sizes, for the tolerance within 0.004”.
• Variable speed, through feed, wide rubber pad, spring loaded dots conveyor for the best finish selections.
• Heavy-duty pressure rolls at top of wide width conveyor to hold the material tight for prevent sliding during the cutting process.
• Shaper head can be move up & down, forward & backward.
• Equipped with industrial motor for full power cutting capacity.
SPECIFICATIONS:
Max. Working Size:
Thickness 4",
Length 48",
Miter Saw Blade 10" x 1" Dia.,
Grooving Saw Blade 10" x 1" Dia.,
Shaper Cutter 6" ~ 8" x 1" Dia.,
Feed Speed 12' ~ 52' Variable,
Motor 3 PH, 220/440 V,
Trim Saw 3 HP x 2,
Grooving 2 HP x 2,
Vertical Shaper 5 HP x 2,
Feeding 1 HP x 1,
Width Setting ½ HP x 1,
Machine Size (L x W x L) 8' x 8' x 6',
N.W. 2800 LBS,
G.W. 3400 LBS.
|
8360K
|
LOBO
|
One (1) New Lobo 4 Head Double End Tenoner Model No: Set-5sa
Features:
• With the double end miter saw, you can do cut-off stock faster or consider a double end miter saw combined with moulding head, it lets you cut off stock and moulding pattern in a single feed, that saves time, space, cost.
• Air-operated clamp comes down holding sticks firmly in place. After work piece is clamped, table start to feed, performs trimming, shaping operations.
• With trim saw, you can cut stock clearly, no burrs for a trimming purpose.
• Moulding spindle is mounted at the rear of saw head enable the machine performs edge moulding after stock is cut off.
• The entire cutting cycle, cut-off, shaping tenon or mortise, is automatically operated at single pass of stock feeding.
• The table travels on a precision linear motion guide for stability.
• The table traverse is driven by power system, ensuring very stable, smooth work piece feeding.
• Variable feed speed permits proper feed selection for hard or soft wood materials.
• Big hand wheel adjust depth of cut.
• All controls are grouped in a control panel.
• Industrial full power motor for maximum cutting capacity.
• Other size is optional.
• Precision sealed long life bearing.
• Heavy cast iron frames and table for durability usage.
SPECIFICATIONS:
CAPACITY Max. Length or Cut 60",
Min. Length of Cut 12",
Max. Width of Cut 24",
Max. Clamping Thickness 4-1/2",
SAW Saw Blade Dia. 8" ~ 12"x 2,
(TRIM) Saw Arbor Dia. 1",
Saw Blade Speed 3400 RPM,
Saw Head Swivel (Degree) 360,
MOULDER Moulder Spindle 1 " Dia. x 5" Lx 2,
(COPE) Spindle Speed 6000 RPM,
(SHAPER) Spindle Swivel 360,
TRAVERSE Saw Longitudinal Travel 12",
Saw Vertical Travel 17",
Carriage Cross Travel 24",
MOTOR Saw Head Drive 2 HP x 2,
Moulder Spindle 2 HP x 2,
WEIGHT N.W. 1500 LBS,
G.W. 1760 LB5,
|
8304K
|
LOBO
|
One (1) NEW Lobo 8' - 10 HEAD THROUGH FEED DOUBLE END Model No: SET-810NU
Features:
• The automatic high-speed through feed device allows for perfect finishing at speeds ranging from 20~66 FPM.
• Suitable for mass production of wood working factory for processing of double end cutting, tenoning, grooving, moulding, sanding.
• It is a powerful machine great for heavy-duty production.
• In addition to the double end cutting, all the settings and other processing can also be executed with highly accuracy.
• Since the machine is so versatile, we believe it should be one of the most satisfactory equipments for bulk production lumber-processing factories.
• The specially designed numeric controller allows quick setting of length sizes, for the tolerance within 0.004.
• The numeric counting system provides highly accurate settings, and a special memory retains all settings, even if there is a power failure.
• Variable speed, through feed, wide rubber pad, spring loaded dots conveyor for the best finish selections.
• Heavy-duty powered pressure rolls at top of wide width conveyor to hold the material tight for prevent sliding during the cutting and sanding process.
• Shaper head can be move up & down, forward & backward.
• Equipped with industrial motor for full power cutting and sanding capacity.
• Two sanding heads can be use brush, flap wheel or profile disc for fine finish at one pass.
• Trim saws and sanding heads can be tilt for different angular setup.
• Heavy cast iron base for durability usage.
SPECIFICATIONS:
Max. Working Size:
Thickness 4",
Length 96",
Miter Saw Blade 12" x 1" Dia.,
Grooving Saw Blade 8" x 1" Dia.,
Shaper Cutter 6" ~ 10" x 1" Dia.,
Feed Speed 20' ~ 66' Variable,
Motor 3 PH, 220/440 V,
Trim Saw 5 HP x 2,
Grooving 3 HP x 2,
Vertical Shaper 7-1/2 HP x 4,
Sanding 2 HP x 2,
Feeding 3 HP x 1,
Width Setting ½ HP x 1,
Machine Size (L x W x L) 14' x 14' x 5',
N.W. 16500 LBS,
G.W. 19800 LBS.
|
5630
|
SCM INTERNATIONAL
|
10 STATION, 120' JUMP
|
Back
to Machinery Listings