|
|
SAWMILL  = photo available |
| Ref# |
Make |
Description |
6089
|
ALBANY
|
Albany Resaw 6' Horz. hi-strain.
|
8013E
|
C A E
|
One (1) Used 6' CAE High Strain Quad Resaw with linear positioner cylinders. Infeed rollcase
Linebar c/w two (2) hydraulic driven pressrolls. Bandmill quick change covers. Bandmill control panels. Four (4) WEG 200 HP motors.
|
8000E
|
C A E
|
One (1) Used CAE 6’ left hand double column Band Resaw. With Infeed rollcase, heavy duty fabricated steel frame. Infeed linebar, heavy duty fabricated steel frame c/w fixed linebar. Outfeed Linebar, heavy duty fabricated frame c/w fixed linebar. Outfeed rollcase. No hydraulic power unit, no main arbor motors. 11" wheel face, Autolube system, motorized guide.
|
6320
|
CAE
|
Air Strain, Temposonic Shifting, Complete With: 250 hp Motor, 250 hp Starter, Double 40 hp Hydraulic Support Unit, Shifting Top Guide, Control Console, Flare Infeed / Outfeed System, 18" x 22' Infeed Rollcase w/ Fence & Drive, 18" x 11' Infeed Rollcase w/ Fence , Drive & 3 Vertical Press Rolls, 32" x 20" Outfeed Rollcase w/ Drive & Shifting Splitter, 42" x 25' Outfeed Rollcase w/ Drive
|
8003E
|
KOCKUMS
|
One (1) Used 6' Kockums high strain Slant Resaw. CAE feedworks and linebar, shifting outfeed conveyer for slab separation linear positioner on Bandmill, control console, 150 hp, Top wheel 1" from edge, Pacific Fluid System hydraulic unit - 2 - 40 hp pumps, 1-1/2 hp circulating pump, 300 gallon tank, 50 gallon tank on stand.
|
5481
|
L&B
|
5', OVERHUNG HORIZONTAL, HIGH STRAIN
|
8180A
|
McDonough
|
One (1) Used McDonough 62” Super-Duty Air Strain Linebar Resaw, including McDonough shifting bar linebar table, with right side 10” x 10’ chromed bar, two (2) air-tensioned hydraulic-driven Coleman tooth style press rolls, three (3) 24” x 8-1/2” knurled & chromed infeed bed rolls, one (1) knurled & chromed 12” x 8-1/2” outfeed bedroll, maximum opening of 24”-wide with 12” each side of sawline, 12” stroke hydraulic linear positioner cylinder with servo valve and Temposonics wand, setworks, and feed drive power packs.
|
6345A
|
McDonough
|
McDonough 62” Super-Duty Air Strain Linebar Resaw, including McDonough shifting bar linebar table, with right side 10” x 10’ chromed bar, two (2) air-tensioned hydraulic-driven Coleman tooth style press rolls, three (3) 24” x 8-1/2” knurled & chromed infeed bed rolls, one (1) knurled & chromed 12” x 8-1/2” outfeed bedroll, maximum opening of 24”-wide with 12” each side of sawline, 12” stroke hydraulic linear positioner cylinder with servo valve and Temposonics wand, setworks, and feed drive power packs.
.
|
5996
|
MEADOWS
|
Meadows Portable Mill, 2 H Block, 2 vertical saw edger, 36" opening on H.B.
|
8340DD1
|
MONTGOMERY
|
One (1) Used only NEW Montgomery Sawmill, with 4-block carriage, air dogs, flippers 16 ft x 36” cap.; Tyrone carriage drive, auto set, Carriage track
|
5684
|
OPTIMILL
|
RESAW SYSTEM CONSISTING OF:
5Hp SLOW DOWN ROLL ASSEMBLY. TILTING LANDING DECK. 7.5Hp "S" DRIVE TRANSFER DECK W/ SETS OF DUCKER ARMS. HYDRAULIC FEEDROLL SYSTEM. 75Hp X 30" COLLARED SAW ASSEMBLY (5 SAWS INCLUDED). OUTFEED TIPPLE GATE. 7.5 Hp OUTFEED BELT 12" X 50'. OPERATING CONSOLE, VALVES, PHOTEYES, ETC.
|
8080A
|
PRECISION
|
One (1) Used Late Model Precision Small Log Scragg Model E3M607085. Includes 9’ long hydraulic driven log turning roll section, sharp chain transport system with air operated rubber tire log hold down assembly, non-setting twin 21” diameter circle saws with a 50 HP electric drive with 2” spacing, setting twin 13” diameter vertical edger saws with a 40 HP electric drive with setworks to yield 2”, 4”, and 6” center boards. Will handle logs up 12” diameter and to 10’ in length. No hydraulic power unit.
|
8005E
|
SALEM
|
One (1) Used 5' Salem High Strain Horizontal Bandmill Resaw. Shifting (up to 12" of lift),
Used for thin slabs to make 1" and 2" boards from the slabs. Includes setworks, Infeed rollcase available at extra cost. Will be taken out of service Feb. 8/08
|
8588
|
Salem
|
SALEM 6' LH Temposonic positioned high strain resaw, TOSHIBA 200 hp/1180 rpm
|
6646A
|
Sanborn
|
Sanborn Min-Max Portable Sawmill. 1992, 36” X 20’ Log capacity. 4 Cylinder 40 HP Diesel Engine. Triple axle trailer. 4-Head block log carriage with hydraulic set. 15 GPM hydraulic pump to operate all mechanics. Log cleaner operates ahead of bandsaw to eliminating the need to debark logs. Uses 6” wide blades, 21’-7” long, 19-gage (.042”), 1.75” tooth space,. 80” Kerf, with silver teeth on back side. This unit will easily out produce nearly all horizontal based bandsaw mills. Like New
|
5389
|
SCHURMAN
|
22' SAWS,50Hp, 10 HP HYD
|
5368
|
SWEECAN
|
52' TWIN X 6' WHEEL FACE & LINE BAR TABLE 300 FPM SPEED, 40 HP DRIVES.
|
8498UU1
|
TURNER
|
42” Turner Tilting Single Resaw Hydraulic Feed
|
8335CC1
|
WOOD MIZER
|
One (1) Used 2006 Wood Mizer LT40HDD34 Portable Sawmill Bandsaw. Complete with all sharpening equipment and 30 (or so) blades. The unit has only 80 hours and has a 34 horse CAT 3-cyl diesel. De-barker also and heavy duty trailer package.
|
6104
|
WOODMIZER
|
Woodmizer 4-head Horizontal resaw with meri-go-round.
|
Back
to Machinery Listings