|
|
SAW  = photo available |
| Ref# |
Make |
Description |
6089
|
ALBANY
|
Albany Resaw 6' Horz. hi-strain.
|
6337
|
Andrus
|
27" Andrus Strip Saw
|
8566
|
Armstrong
|
Armstrong Late Model No. 4 Right Hand Automatic Bandsaw Sharpener complete with motors, starters, set of cams, set of post brackets, heavy duty rocker arm assembly, carbide face plate, Sidewinder feed finger, and a Proctor Roll tension roll unit to help prevent saw cracking. Will handle saws from 8 to 16 widths.
|
8535A
|
ARMSTRONG
|
One (1) Used Late Model Armstrong No. 25 Automatic Circular Saw Sharpener, For saws from 13"- to 72"-diameter. Equipped with magnetic saw holder and mechanical saw clamp. Appears in very good condition.
|
8563
|
Armstrong
|
One (1) Used Armstrong No. 6 Motorized Bandsaw Stretcher Roll. Complete with steel base, plain bearings, gearmotor and new or reground rolls.
|
8536A
|
ARMSTRONG
|
One (1) Used Armstrong No. 25 Automatic Circular Saw Sharpener, For saws from 13"- to 72"-diameter. Equipped with magnetic saw holder and pneumatic saw clamp. Appears in very good condition.
|
8534A
|
ARMSTRONG
|
One (1) Used Armstrong No. 25 Automatic Circular Saw Sharpener, For saws from 13"- to 72"-diameter. Equipped with magnetic saw holder and mechanical saw clamp. Appears in very good condition.
|
8533A
|
ARMSTRONG
|
One (1) Used Armstrong Model No. 16 Automatic Trim and Chop Saw Sharpener. Handles saws from 8"- to 40"-diameter, speed of 34.8 teeth per minute, 1/4" to 2" tooth space, 1/4" to 1" tooth depth, 0- to 30-degrees positive hook, 0- to 15-degrees negative hook, 15-degrees to 40-degrees face bevel, 2500 RPM grinding wheel speed, 4-1/2" to 8" wheel dia., 1/8" to 3/4" wheel thickness, 1" wheel bore, and weight of 1100-lbs.. 1/2 HP arbor and 1/3 HP drive motors. Includes starters. 1,000-lbs; 64 cubic feet. Appears in good condition.
|
8232VV
|
ARMSTRONG
|
TWO (2) Used Armstrong Band Saw Sharpener. Number-2LH, 1/3 H.P Grinding Motor;
1/3 H.P Gearhead Indexing Drive, Motor,
All 220-440 Volts,
3 Phase.
|
8537A
|
ARMSTRONG
|
One (1) Used Armstrong No. 25 Automatic Circle Saw Sharpener, For saws from 13"- to 72"-diameter. Appears in good condition.
|
8531A
|
ARMSTRONG
|
One (1) Used Late Model Armstrong No. 2 Left Hand Automatic Bandsaw Sharpener,. for saws up to 8 wide. Complete with a set of post brackets, motors, starters, and one set of standard cams. Good condition.
|
6037
|
ARMSTRONG
|
Armstrong #16 saw grinder.
|
8532A
|
ARMSTRONG
|
One (1) Used Late Model Armstrong Model No. 16 Automatic Trim and Chop Saw Sharpener. Handles saws from 8"- to 40"-diameter, speed of 34.8 teeth per minute, 1/4" to 2" tooth space, 1/4" to 1" tooth depth, 0- to 30-degrees positive hook, 0- to 15-degrees negative hook, 15-degrees to 40-degrees face bevel, 2500 RPM grinding wheel speed, 4-1/2" to 8" wheel dia., 1/8" to 3/4" wheel thickness, 1" wheel bore, and weight of 1100-lbs.. 1/2 HP arbor and 1/3 HP drive motors. Includes starters. 1,000-lbs; 64 cubic feet. Appears in excellent condition.
|
8565
|
Armstrong
|
One (1) Used Late Model Armstrong No. 2 Left Hand Automatic Bandsaw Sharpener, for saws up to 8 wide. Complete with a set of post brackets, motors, starters, and one set of standard cams.
|
8564
|
Armstrong #4
|
One (1) Used Armstrong No. 4 Right Hand Automatic Band Saw Sharpener. Complete with motors, starters, carbide face plate, Sidewinder feed finger, one set of cams, and a set of post brackets including one automatic.
|
8540
|
ARMSTRONG RH
|
One (1) Used Armstrong No. 6 Motorized Bandsaw Stretcher Roll,. Complete with steel base, plain bearings, gearmotor and new or reground rolls.
|
8238A
|
BAKER
|
One (1) Used Baker Model BBR-0 Horizontal Single Band Resaw 28 wheel diameter, with 6 wide conveyor belt (no return conveyor). Height thickness adjustment via hand wheel on conveyor. Mechanical tensioned holddown roll. 20 HP motor with starter dual voltage 60 Hz. wired 240 volts. Physical size 7ft. square. Weight 1,750 lbs. This is the Baker "A" basic model it can be used to cut boards, cants, or reclaim slabs. This machine will process a timber up to 7" wide by 7" tall in any desired length. The hydraulic variable speed feed works is adjustable from 0 to 120 ft pr min. This saw covers a large range of applications from small shops to large facilities. The Baker "A" Band Resaw models are simple to operate and maintain. With few moving parts and few adjustments, even new employees quickly master the saw. Bandsaw blades will range in price depending on size and type and quantity that you purchase; the range is between $13.00 to $17.00 each. This has a shop made hopper feed and plastic holddown that can be taken off.
|
8558
|
Baker
|
Baker single horizontal Resaw c/w 6" return belts, transfers, de-duster.
|
8561
|
Brewer
|
Brewer Resaw (2) head horizontal band resaw, Model BR-2B 2000 with 6" feed belt & return belt, hydraulic unit and controls
|
8013E
|
C A E
|
One (1) Used 6' CAE High Strain Quad Resaw with linear positioner cylinders. Infeed rollcase
Linebar c/w two (2) hydraulic driven pressrolls. Bandmill quick change covers. Bandmill control panels. Four (4) WEG 200 HP motors.
|
8000E
|
C A E
|
One (1) Used CAE 6 left hand double column Band Resaw. With Infeed rollcase, heavy duty fabricated steel frame. Infeed linebar, heavy duty fabricated steel frame c/w fixed linebar. Outfeed Linebar, heavy duty fabricated frame c/w fixed linebar. Outfeed rollcase. No hydraulic power unit, no main arbor motors. 11" wheel face, Autolube system, motorized guide.
|
6320
|
CAE
|
Air Strain, Temposonic Shifting, Complete With: 250 hp Motor, 250 hp Starter, Double 40 hp Hydraulic Support Unit, Shifting Top Guide, Control Console, Flare Infeed / Outfeed System, 18" x 22' Infeed Rollcase w/ Fence & Drive, 18" x 11' Infeed Rollcase w/ Fence , Drive & 3 Vertical Press Rolls, 32" x 20" Outfeed Rollcase w/ Drive & Shifting Splitter, 42" x 25' Outfeed Rollcase w/ Drive
|
8235V
|
CAIN
|
One (1) Used Cain 5 Panel Ripsaw. Currently in use, Removing from power in May
Roll-fed 5 panel ripsaw system with 63 width capacity. One man can operate this high productivity ripsaw with major production capacity. The arbor diameter is 3-15/16 with a 100 HP motor. Does NOT include: canted roll case feed, stacker, roller system bolted
onto front and back of this ripsaw, catwalks around the ripsaw and saw hubs or blades.
|
8398NN1
|
CANTEK
|
One (1) Used Ripsaw - Cantek - Model C10RS, Total Hp 11, Largest Hp 10, Total Amp 29.4, Voltage 230.
|
8401NN1
|
CANTEK
|
One (1) Used Ripsaw - Cantek - Model C12RS, Total Hp 16, Largest Hp 15, Total Amp 16.5, Voltage 575.
|
8443MA2
|
CASADEI
|
One (1) Used Casadei Panel Saw, Model: SV32, 1996. Front loading 10' beam saw with 3 air tables. Available Now
|
8476MA2
|
CASADEI
|
One (1) Used Casadei Front load Panel saw, Model: MX 39, 2002, 12 HP, 90mm gripper opening, Main motor of 12hp and scoring motor of 1.5 hp, 6 grippers on programmable pushing fence, Programmable saw carriage, 3 air tables with air cushion venting and PC controller with editor software and Ethernet connection. READY TO SHIP TODAY, Very motivated!!
|
8183H
|
CASADEI SWIN EMA
|
One (1) Used CASADEI SWIN EMA, 5V-45P Panel Saw. Automatic with overhead clamping, rear loading, 14' Cap. Touch Screen control, cutting pattern is displayed on screen.
|
8512TT1
|
DIEHL
|
One (1) Used Diehl #SL-52 15HP Straight Line Rip Saw
Diehl #SL-52 Straight Line Rip Saw. 15HP. Consistent well-running unit.
220V/440V.
|
8320JJ
|
DIMTER
|
One (1) Used Dimter Optimizing Chopsaw, Model OKS-510L, 12 Width Capacity Dual Laser Marking With Auto Y Infeed To Saw, Width Measurement Recognition 67 Sorting Conveyor With 6 Sorters.
|
8174A
|
Doledene
|
One (1) Used Doledene 38 MK II Vertical Band Resaw. 3½ wide wheels. Tilting non powered adjustable fence. Includes Starters. Wheels are driven by a 25 HP TEFC 230/460 volt motor. Resaw was originally equipped with a hydraulic driven pressroll on the outside of saw but mechanism is missing except for the hydraulic built-in.
|
8568
|
Ekstrom Carlson
|
One (1) Used Ekstrom Carlson Model EE Straight Line Chain Feed Glue Join Edging Saw. 30 HP Saw arbor motor. Maximum thickness 31/4" with 16" dia saw blade (no blade). 5 HP feed motor with feed rates infinitely variable to 280 FPM. Triple lower infeed rollers are chain driven and are adjustable from zero to 5�. Elongated pressure bar housing assures the proper guidance across the entire table length. Rollers are spring loaded with one inch yield. Dual position and lubrication system, two outfeed rollers.
|
8129A
|
EVANS
|
One (1) Used Evans Model 3600, 5-Saw Selective Panel Ripsaw. 2 x 48 capacity. Six (6) airlift rubber-coated powered press rolls. Splined saw arbor with all five (5) saws adjustable by either electric motor or manually. 25 HP, 230/460-volt TEFC arbor drive motor, 3 HP vari-drive for feed, starters for 240-volts. Currently missing two small electric motors to move two saws
|
8437MA1
|
GABBIANI
|
One (1) Used 2004 SCM GABBIANI 'Galaxy 105ST' 3300mm CNC Rear Loading Automatic Beam Saw for cutting sheet materials. with Sheet Loader to Rear & 3: Air flotation tables to front.
This modular design is Gabbiani's newest design. The Galaxy 105 be loaded automatically from the rear or direct from front for complete machining versatility. The Galaxy 105 is a state of the art machine. Features:
-THK Guide System
-Quick Blade Change
- The Rack and Pinion Drive System locates in both the "pusher" and "carriage" guarantee high quality finished parts and processing speeds associated with much more expensive panel sizing machines.
- THK Guides
- The innovative Slotted Pressure Beam guarantees complete control of the processed material throughout the entire cutting process.
- The Magnetic Strip positioning system guarantees accuracy and repeatability
- Real Time and Online Diagnostics allow for easy troubleshooting
- Mobile Air Flotation Table For Effortless movement
Machine Specs:
- 105mm Saw Projection
- Pneumatic Quick Blade Change
- High Speed Machine. Currently in Europe
|
8184H
|
Gabbiani
|
One (1) Used Gabbiani 12 ft Panel Saw, Rear Load, Computerized with Scoring.
|
6336
|
Globe
|
Globe 16T combination saw with drives
|
8182H
|
GLOBE
|
One (1) Used Globe Panel Saw model 16C, 60, holds multiple saws. Ideal for ripping. Arbor Motor 40 HP, 3550 RPM; Vari Drive gear head. Sleeve.
|
6338
|
Globe
|
Globe Vacuum Panel Feeder
|
8439H
|
GRECON- complete chop saw line
|
Three (3) Used Grecon Automatic Optimizing Saw with 24 blades. Cuts 8 wide boards.
One (1) Used Grecon Dimter Automactic infeed system: can replace all parts in the future with the spare parts that are included
Two (2) Used Grecon dimter out-feed system with seven air operated kickers
Also included:
-1 spare head
-4 extra doors to view line
-2 electrical control units
-large cabinet of spare parts
-4 computer systems
-1 cabinet for computer board
-2 extra saw for parts, total 3 cutting heads with stand
-1 extra head
(lots of photos available upon request)
|
6038
|
HANCHET
|
Hanchet Type 6 band saw grinder.
|
8233VV
|
HANCHETT
|
One (1) Used Hanchett Stretcher and Saw Bench. Size- 810, 2 H.P Motor, 220-440 Volts,
3 Phase.
|
5591
|
HANCHETT
|
HANCHETT GRINDER
RIGHT-HAND
MODEL A230
CONDITION: GOOD
|
8436MA1
|
HOLZMA
|
One (1) Used HOLZMA 'HPL 11/32/22' 3200mm Rear Loading Automatic Beam Saw for cutting sheet materials. Approx. 2m wide x 4.5m long Roller Conveyor Lift table to Wheeled Infeed Conveyor with 3: Air flotation tables, CADmatic CNC Control with high speed rack & pinion drive to saw carriage. Currently in Europe
|
8091A
|
JLT
|
One (1) Like New JLT Model #79K-7 Door Clamp Machine was used for one week. 38 x 84 maximum capacity, 2 horizontal pneumatic clamps, 4 vertical pneumatic clamps, One lever operation. 400 lbs of clamping force per cylinder, 45 Degree working angle, Designed for stile and rail cabinet doors. Shipping dimensions: 112L x 68H x 42. Weight 675 lbs.
|
8177A
|
Kikukawa
|
One (1) Used Kikukawa Type KV-43 Vertical Rollfeed Resaw, 43 diameter wheels are 4½ wide. Maximum capacity is 12 outside sawline and 16 inside sawline. Maximum depth of cut is over 20. 30 HP, 460V Toshiba motor. Air setworks.
|
6647A
|
Kimwood
|
One (1) Used Kimwood/Tri-State Model T-36-4 36" Single-Band Tilting Roll Feed Resaw, Will either self-center or gauge saw. Feed rolls tilt up to 45-degrees. Feed speeds from 10 to 250 FPM. 3-1/2"-wide wheel for 4"-wide band or narrower. Maximum capacity is 6"- x 8"-wide stock. Usual saw kerf is 1/16". 25 HP, 220/440-volt motor 50/60-cycle. Feed rolls driven by two 1 HP, DC variable-speed motors powered by SCR control unit
|
8126A
|
KIMWOOD/TRI-STATE
|
One (1) Used Kimwood/Tri-State Model T-36-4 36" Single-Band Tilting Roll Feed Resaw. Will either self-center or gauge saw. Feed rolls tilt up to 45-degrees. Feed speeds from 10 to 250 FPM. 3-1/2"-wide wheel for 4"-wide band or narrower. Maximum capacity is 6"- x 8"-wide stock. Usual saw kerf is 1/16". 25 HP, 220/440-volt motor 50/60-cycle. Feed rolls driven by two 1 HP, DC variable-speed motors powered by SCR control unit. Wt. 200-lbs.
|
8003E
|
KOCKUMS
|
One (1) Used 6' Kockums high strain Slant Resaw. CAE feedworks and linebar, shifting outfeed conveyer for slab separation linear positioner on Bandmill, control console, 150 hp, Top wheel 1" from edge, Pacific Fluid System hydraulic unit - 2 - 40 hp pumps, 1-1/2 hp circulating pump, 300 gallon tank, 50 gallon tank on stand.
|
8489A
|
L & B
|
One (1) Used L & B 6 Ft Horz. Band Resaw. Csmi/Letson Hsa-1 Single Set Temposonic Positioned Full Air Strain 6' Horizontal Bandmill W/Toshiba 200 Hp/1188 Rpm, 30"X14' Feed Thru Rollcase W/Knurled & Smooth Rolls, Top Hold Downs, Accu-Lube System, 20' Hydraulic Driven Infeed Rollcase, Spare Saws, Guides In Filing Room, Marked Controls & Electrics 9305-0156
|
5481
|
L&B
|
5', OVERHUNG HORIZONTAL, HIGH STRAIN
|
8256K
|
LOBO
|
One (1) NEW 12 SINGLE RIP SAW Model No: TRS-0012
Main Motor 10 HP; Feed Motor 1 HP; Feed Chain Width 6"; Automatic Lubrication YES; Minimum Work Piece Length 12".
|
8290K
|
LOBO
|
One (1) NEW Lobo 18" SINGLE RIP SAW (bottom). Model No: TRS-3018 Feeding Speed (RPM) 30 ~ 85, Throat to Blade Depth 26", Main Motor 20 HP,
Feed Motor 3 HP , Feed Chain Width 8-3/4", Automatic Lubrication YES, Minimum Work Piece Length 8"
|
8299K
|
LOBO
|
One (1) NEW Lobo 52" MULTIPLE GROOVE or RIP SAW Model No: TRS-1300G
Features:
Max. Working Width 51",
Min. Working Width 26",
Working Thickness 1/8" ~ 1",
Feed Speed 9 ~ 48 FPM,
Saw Blade Size 8",
Saw Blade Speed 2600 RPM,
Top Pressure Rollers 6,
Bottom Pressure Rollers 6,
Saw Motor 15 HP,
Feed Motor 4 HP,
Machine Size (L x W x H) 79" x 69" x 47".
|
8291K
|
LOBO
|
One (1) NEW Lobo 12" HOR. BAND RIP SAW Model No: BS-1212H
Max. Cutting Capacity 12" x 12" , Distance between Blade to Conveyor 1/8" ~ 12",
Saw Wheel Diameter 24" x 2,
Saw Blade Length (Width) 184" (1" ~ 1-1/2"),
Saw Blade Speed 6000 FPM,
Feed Conveyor Size (W x L) 10-5/8" x 165-1/2",
Feed Conveyor Tilt Degree 0 ~ 30
Feed Speed (Variable) 0 ~ 120 FPM,
Main Motor 20 HP ,
|
8293K
|
LOBO
|
One (1) NEW Lobo Mult. Slice Thin Rip Frame Saw Model No: Trs-150F
Width 0.75" ~ 6",
Height 1.25" ~ 7.865",
Finish Material Thickness > 0.094",
Thickness of Saw Blade 0.043" ~ 0.055",
Main Motor 15 HP,
Feed Motor 1 HP,
Feed Speed 1 ~ 5 FPM,
Air Pressure 90 PSI,
Lubrication System Auto Oil Lubrication,
Cooling System Water & Air,
Machine Size 142" x 32" x 75",
G.W. 5800 LBS,
N.W. 5070 LBS.
|
8463K
|
LOBO
|
One (1) NEW Lobo Vertical 36 Band Ripsaw with Feeder. Model BS-900H
Feed Feeder Opening 14",
Feed Feeder Speed (Variable)26 ~ 105 FPM,
Saw Wheel Drive Motor 30 HP,
Feed Drive Motor 2 HP,
G.W. 4560 LBS,
|
8297K
|
LOBO
|
One (1) NEW LOBO 20" MULTIPLE RIP SAW Model No: TRS -2000
Feeding Speed 15 ~ 70 FPM ,
Main Motor 60HP ,
G.W. 5000 LBS
|
8461K
|
LOBO
|
Horizontal Band Rip Saw "New", 16 model BS-1616HR.
Machine built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
It is equipped with a digital controller for convenient and accurate thickness setting...
The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations
Variable feed speed is controlled by a frequency inverter for best cutting requested.
The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses
Blade tension is adjusted by means of a hand wheel.
A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
The cast iron saw blade wheel are dynamically balance for smooth running.
Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
SPECIFICATIONS BS-1616HR
Max. Cutting Capacity 16-1/2" x 16-1/8",
Distance between Blade to Conveyor 1/4" ~ 10-5/8",
Saw Wheel Diameter 32" x 2,
Saw Blade Length (Width) 184" (2"),
Saw Blade Speed 6150 FPM,
Feed Conveyor Size (W x L) 16" x 165-1/2",
Return Conveyor (L x W x H) 100" x 24" x 32",
Feed Speed (Variable) 0 ~ 90 FPM,
Main Motor 30 HP,
Saw Blade Lift Motor 1/2 HP,
Feed Conveyor Motor 2 HP ,
Return Conveyor Motor 1 HP ,
Dust Hood 4" x 2,
Machine Size 128" x 130" x 78",
N.W. 4000 LBS.
Price: $25,990
Location: California
|
8296K
|
LOBO
|
One (1) NEW LOBO 12" MULTIPLE RIP SAW, T.B. MOULDER Model No: TRS -1200TB
Max. Working Width 7-7/8",
Max. Working Thickness 3",
1th Bottom Spindle:
Spindle Dia 40 mm,
|
8263K
|
LOBO
|
LOBO 18 HEAVY DUTY BAND SAW
One (1) NEW LOBO 18 HEAVY DUTY BAND SAW Model BS-0181
Features:
Safety foot brake. Sealed long life ball bearings. Precision ground cast iron rip fence
Large precision ground cast iron table. Magnetic control for overload protection
Excellent cutting power for wood or similar materials.
Turnning wheels are equipped with vulcanized rubber tires and are precisely balanced for smooth and accurate cutting.
STANDARD EQUIPMENT: TEFC motor, Magnetic switch, One saw blade, Bottom Wheel Cleaning brushes, High precision fence
SPECIFICATIONS: Cutting Capacity (H x W)9-3/4" x 17-1/2"; Table Dimensions 18" x 18"; Table Tilting 10 L / 45 R; Wheel Diameter 18";
Blade Speed 3300 RPM; Motor (230 V) 1-1 /2 HP 1 PH; Saw Blade Size L x (W) 133"x(1/4"~1-1/2"); N.W. 350 LBS;
G.W.420 LBS.
|
8292K
|
LOBO
|
One (1) NEW LOBO 16" HOR. BAND RIP SAW Model No: BS-1616HR
Max. Cutting Capacity 16-1/2" x 16-1/8,
Distance between Blade to Conveyor 1/4" ~ 10-5/8",
Saw Wheel Diameter 32" x 2,
Saw Blade Length (Width) 184" (2"),
Saw Blade Speed 6150 FPM,
Feed Conveyor Size (W x L) 16" x 165-1/2",
Return Conveyor (L x W x H) 100" x 24" x 32",
Feed Speed (Variable) 0 ~ 120 FPM,
Main Motor 30 HP,
Saw Blade Lift Motor 1/2 HP,
Feed Conveyor Motor 2 HP,
Return Conveyor Motor 1 HP ,
Dust Hood 4" x 2,
Machine Size 128" x 130" x 78",
N.W. 4000 LBS.
|
8295K
|
LOBO
|
One (1) NEW Lobo 14" MULTIPLE RIP SAW Model No: TRS -1014 Precision fence assures absolute accuracy Double anti-kickback fingers mounted at the infeed side provided maximum safety protection.
Auto lubrication
Maximum Cutting Depth 4-3/4",
Arbor Diameter 70 MM with 2 keys,
Spindle Length 11",
Max. Amount of Blades Per Spindle 12,
Saw Blade Size 10" ~ 14",
Table Dimensions 30" x 62",
Spindle Speed 4000 RPM,
Feeding Speed (Variable) 30 ~ 100 FPM,
Throat Depth (1st Blade) 12",
Main Motor 50 HP,
Feed Motor 2 HP,
Feed Chain Width 12",
Automatic Lubrication YES,
Minimum Work Piece Length 23",
Exhaust Hood Diameter 6 ",
N.W. 4700 LBS,
G.W. 5000 LBS.
|
8247K
|
LOBO
|
One (1) NEW HORIZONTAL BAND RESAW, Model No: BS-1212HR, 12" X 12"
It is equipped with a digital controller for convenient and accurate thickness setting...
The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
Variable feed
The cast iron saw blade wheels.
Tilt 30 Degree Feed Speed (Variable) 20 ~ 90 FPM; Drive 15 Hp;
Saw Blade Lift Motor 1/2 HP;
Feed Conveyor Motor 1 HP;
Dust Hood 4" x 1; Machine Size 88" x 85" x 74",
N.W. 2500 LBS.
|
8289K
|
LOBO
|
One (1) NEW Lobo 16" SINGLE RIP SAW (bottom). Model No: TRS-3016
Feeding Speed (RPM) 0 ~ 90, Throat to Blade Depth 19", Main Motor 15 HP, Feed Motor 2 HP, Feed Chain Width 7", Automatic Lubrication YES, Minimum Work Piece Length 5", Exhaust Hood Diameter 4", N.W. 3200LBS, G.W. 3900 LBS.
|
8294K
|
LOBO
|
One (1) NEW Lobo MULT. SLICE THIN RIP FRAME SAW Model No: TRS-80F
Main Motor 20 HP,
|
8288K
|
LOBO
|
One (1) NEW Lobo 16" SINGLE RIP SAW (top). Model No: TRS-0016
Maximum Cutting Depth 5", Arbor Diameter 1", Max.
Saw Blade Size 10" ~ 16", Table Dimensions 40" x 70", Spindle Speed 3600 RPM, Feeding Speed (RPM) 30 ~ 85, Throat to Blade Depth 20", Main Motor 15 HP, Feed Motor 1 HP, Feed Chain Width 6", Automatic Lubrication YES, Minimum Work Piece Length 12"
|
8298K
|
LOBO
|
One (1) NEW LOBO MOVABLE MULTIPLE RIP SAW Model No: TRS-0816DET
Max. 12½",
Max. thickness 5-1/8",
Saw drive motor 50 HP,
Net weight 5900LBS,
|
8568
|
Mattison
|
One (1) Used Mattison Model 202 Fast Feed Straight Line Ripsaw. Single saw unit will handle stock down to 7-1/2"in length, up to 4" thick, and of any width out side saw and up to 24-1/2"inside saw. Takes up to 14" dia. Sawblade on a 1-1/2" dia. Spindle. Feed speeds from 62 to 186 feet per minute. Arbor motor is 20 HP, 3,600 RPM, 220/440 Volts, 3-phase.
|
6561E
|
McDonough
|
One (1) Used 54" McDonough Resaw. 2) Available
|
5708A
|
MCDONOUGH
|
One (1) Used 42" McDonough TILTING POWERED FEED ROLLS. 75Hp.
|
8180A
|
McDonough
|
One (1) Used McDonough 62 Super-Duty Air Strain Linebar Resaw, including McDonough shifting bar linebar table, with right side 10 x 10 chromed bar, two (2) air-tensioned hydraulic-driven Coleman tooth style press rolls, three (3) 24 x 8-1/2 knurled & chromed infeed bed rolls, one (1) knurled & chromed 12 x 8-1/2 outfeed bedroll, maximum opening of 24-wide with 12 each side of sawline, 12 stroke hydraulic linear positioner cylinder with servo valve and Temposonics wand, setworks, and feed drive power packs.
|
8240A
|
McDONOUGH
|
One (1) Used 1996 McDonough Model SD54A Tandem Twin 54 Horizontal Resaw. 20 wide slat bed runs through both resaws at 36 fixed bed height. Both resaws shift vertically 6 and press rolls open to accept up to 14 thick. Saw setting is through hydraulic motors controlled by Temposonics Probes mounted on each machine and managed by a PLC control. 21 infeed roll case (not pictured) is heavy duty and includes jump chains. Outfeed rollcase includes sweep chains, and 3-way tipple separator system. Five (5) bandsaw blades included. Four (4) sets of three each air tensioned pressrolls are hydraulic powered. Wheel drive motors are 100 HP 1800 RPM 460V TEFC. Resaws appear in excellent condition. Current new replacement cost for the resaws including infeed and outfeed is estimated at over $400,000.
|
6345A
|
McDonough
|
McDonough 62 Super-Duty Air Strain Linebar Resaw, including McDonough shifting bar linebar table, with right side 10 x 10 chromed bar, two (2) air-tensioned hydraulic-driven Coleman tooth style press rolls, three (3) 24 x 8-1/2 knurled & chromed infeed bed rolls, one (1) knurled & chromed 12 x 8-1/2 outfeed bedroll, maximum opening of 24-wide with 12 each side of sawline, 12 stroke hydraulic linear positioner cylinder with servo valve and Temposonics wand, setworks, and feed drive power packs.
.
|
8178A
|
McDONOUGH
|
One (1) Used McDonough 54", Mechanical Strain Tilting Rollfeed Resaw. Older round column model, but has almost new high-strain top wheel. Maximum depth of cut is 30". Maximum opening is 18". Tilts 7-degrees. Will center split or gauge saw. Top wheel is 7/8"-thick at edge of rim, and 7-1/4" wide. Pressure saw guides. Includes one blade, .049 plate, .095 kerf. No motor for wheel or feedrolls. Appears in fair condition.
|
8577
|
McDonough
|
McDonough 54" Tilting Rollfeed Resaw. with bearings mounted in wheel. Top wheel is 5/8"-thick at edge of rim. Feedrolls driven through 5-speed gear box. 440/3/60 drive motor. Maximum stock size is 18"-wide x 24"-high. tilt 15-degrees.Older machine in good operating condition.
|
6649A
|
McDonough
|
One (1) Used Reconditioned McDonough 54" Tilting Rollfeed Resaw. non-rotating upper wheel shaft with bearings mounted in wheel. Top wheel is 7/8"-thick at edge of rim and has 7-1/4"-wide face. Feedrolls driven through 5-speed gear box from 40-220 FPM, 50 HP, 440-volt wheel drive motor. Maximum stock size is 18"-wide x 24"-high. tilt 15-degrees. Pressure saw guides. Will either center split or gauge saw. Air-operated roll opening.
|
8071A
|
McDONOUGH
|
One (1) Used Reconditioned McDonough 54" Tilting Rollfeed Resaw. Mechanical strain; non-rotating upper wheel shaft with bearings mounted in wheel. Top wheel is 7/8"-thick at edge of rim and has 7-1/4"-wide face. Feedrolls driven through 5-speed gear box from 40-220 FPM, 50 HP, 440-volt wheel drive motor. Maximum stock size is 18"-wide x 24"-high. Will tilt up to 15-degrees. Pressure saw guides. Will either center split or gauge saw. Air-operated roll opening.
|
5569
|
McDonough
|
54" McDonough resaw/linebar
w/ Merry-Go-Round, Computerized Set Works. Chain Turner board Flippers, infeed and 20Hp Hydraulic power unit and control booth
|
5996
|
MEADOWS
|
Meadows Portable Mill, 2 H Block, 2 vertical saw edger, 36" opening on H.B.
|
8513TT1
|
MEREEN JOHNSON
|
One (1) Used Mereen Johnson #312DC, 12 Gang Rip Saw, 50HP. Runs
great. Set up multiple saws in the 12 widththis unit will handle it with power to spare. Some blade strikes on the feed chain. 220V/440V
|
8132A
|
MEREEN-JOHNSON
|
One (1) Used Mereen-Johnson Model 212 DC Multiple Blade Straight Line Ripsaw. 12 arbor capacity 4 maximum thickness capacity, minimum length 16. Glue joint minimum length 24 Posi-Feed bed with two precision Mereen-Johnson Double-Vee feed chains, structural aluminum slats with replaceable steel backed rubber inserts. 2 HP feed motor 30-150 FPM, 60 HP belt driven arbor motor wired 460V. Air loaded press rolls for consistent hold down pressure. Includes an extra 80mm OD Sleeve and Spacers.
|
8127A
|
MEREEN-JOHNSON
|
One (1) Used Mereen-Johnson Model No. 555-A, 48 Wide Slat Bed Selective Panel Ripsaw, Currently equipped with four (4) Saw blades and four (4) hold down assemblies which can be set to any location in 48 width. Will handle 2 thick material. Includes starters, power hoist motor, arbor motor, and variable speed bed chain drive. TEST RUN. *To make this machine 80, it will require a new Arbor.
|
8318JJ
|
MEREEN-JOHNSON
|
One (1) Used Mereen-Johnson Gang Ripsaw, Model 3300-DCS. 12 width capacity,Short Block machine (14 single fed minimum length, 6 butt fed minimum length), 50 hp arbor, 3 hp feed (30-150 fpm).
|
8234V
|
MEREEN-JOHNSON
|
One (1) Used Mereen-Johnson 5 Panel Feed, Rip & Stack System
Ripsaw is Model 435-H/R.F. Roll-fed 5 panel ripsaw system with inbound chains to Burelbach layer rake feeding system and Burelbach outbound stacking system leading to outbound chains. Two hydraulic pumps handle the entire system. One hydraulic pump is missing entirely and the electric motoris missing off of the remaining unit (price has been reduced to compensate for this). One man can operate this high productivity ripsaw and material handling system with major production capacity. The arbor diameter is 2-5/8 with a 100 HP motor. Length capacity of 6 0 up to 18 6 long panels.
Thickness capacity of Ό to 1-1/2. Width capacity up to 65.
|
8134A
|
MEREEN-JOHNSON
|
One (1) Used Mereen Johnson Model 424 DC Heavy Duty Chain Feed Multiple Ripsaw. 3HP feed is variable to 150 feet per minute. 2-3/16 arbor with direct connect 65HP TEFC 230/460 volt 3500 RPM motor. 3-1/2 x 24 (or wider) capacity. Rubber inserts in bed chain slats prevent marking. Includes many blades, sleeves, and spare parts.
|
8245A
|
MID-OREGON
|
One (1) Used Mid-Oregon Right-Hand Mechanical Cut-Off Saw, 7-1/2 HP motor. Machine can accept a 16 diameter blade giving extra capacity to cut a 2x, 4x4, 2x12. Two-hand palm switch.
|
8340DD1
|
MONTGOMERY
|
One (1) Used only NEW Montgomery Sawmill, with 4-block carriage, air dogs, flippers 16 ft x 36 cap.; Tyrone carriage drive, auto set, Carriage track
|
8133A
|
OLIVER
|
One (1) New OLIVER Model 4925 Straight Line Ripsaw. 12 diameter blade X 1 arbor maximum ripping width 18, minimum stock length 8. 15 HP, 3 phase motor 220/440V, 2 HP variable speed feed motor 50-130 fpm 3019 lbs. 66 X 45½ X 63 shipping size.
|
5684
|
OPTIMILL
|
RESAW SYSTEM CONSISTING OF:
5Hp SLOW DOWN ROLL ASSEMBLY. TILTING LANDING DECK. 7.5Hp "S" DRIVE TRANSFER DECK W/ SETS OF DUCKER ARMS. HYDRAULIC FEEDROLL SYSTEM. 75Hp X 30" COLLARED SAW ASSEMBLY (5 SAWS INCLUDED). OUTFEED TIPPLE GATE. 7.5 Hp OUTFEED BELT 12" X 50'. OPERATING CONSOLE, VALVES, PHOTEYES, ETC.
|
8125A
|
PACIFIC
|
One (1) Used Pacific Heavy Duty 54 Tilting Feedroll Resaw. Heavy Cast Steel top and bottom wheels have 6 wide faces. Four 6 diameter 12 high feedrolls with ball bearings will either gauge sawing or center splitting and tilt a full 45Ί. Rolls open 16 (8 on each side of blade) and 14 square stock can be sawn corner to corner at 45Ί. 3 HP 4-speed Lima feedroll drive gives speeds of 100, 140, 180, and 200 feet per minute, and can also be reversed. Floor space is 53 X 68. Floor to top of roll table is 27. Weight is 8,500 lbs. includes upper wheel guard. No motor. 75 HP recommended.
|
8444MA2
|
PAOLINI
|
One (1) Used , Paolini Panel Saw. Model: P3200SX , 2006, (ALMOST NEW: Only 50 Hours Of Use.) 10' Sliding Panel Saw With Scoring, Saw Guard, 575v, 3 Ph. Auto/Motorized, Fence Position, Blade Height, Blade Angle, 3-Speed Motor. On/Off Sliding Table. Cross Cut Fence, With Stops. Available Now
|
8514TT1
|
PISTORIUS
|
One (1) Used Pistorius #LH-16-UC-H Cut-Off Saw. This versatile cut-off saw was used every day on the floor of the mill. Includes pneumatically actuated gauge rack on one
side, roller table on the other. Undercut saw cuts from below. Requires compressor
for operations.
|
5622
|
PORTLAND IRON WORKS
|
PIW SELECTIVE RIP SAW, 5 SAW, 10 BOARD MEMORY, 2 HOGGING HEADS, INFEED TILT HOIST, GRADING DECK, CONVEYORS. COMPLETE.
|
8080A
|
PRECISION
|
One (1) Used Late Model Precision Small Log Scragg Model E3M607085. Includes 9 long hydraulic driven log turning roll section, sharp chain transport system with air operated rubber tire log hold down assembly, non-setting twin 21 diameter circle saws with a 50 HP electric drive with 2 spacing, setting twin 13 diameter vertical edger saws with a 40 HP electric drive with setworks to yield 2, 4, and 6 center boards. Will handle logs up 12 diameter and to 10 in length. No hydraulic power unit.
|
8244A
|
PRECISION
|
One (1) Used Precision Model 18 Left Hand Air Operated Chop Saw. 5 HP 220/440 volt motor and starter. 12 long stop bar and outfeed rollcase. Ό second cycle time. Uses 18 diameter blade to cut through stock up to 2 X 12.
|
8321JJ
|
PRECISION
|
Three (3) Used Precision Chopsaws, Model 14-M, 8 width capacity. Mechanical saw stroke, R.H. configuration.
|
9015
|
Precision
|
One (1) Used Precision Products Model 14M Right Hand High Speed Mechanical Chop Saw.
160 cycles per minute. 5 hp 3-phase motor. 2" X 8" capacity. Requires 4" suction pipe with 400 CFM air for proper sawdust removal. Blade side is 14" diameter with 1" eye. Includes foot pedal and starter.
|
8559
|
Producto
|
Producto Model 76 (circular) center split resaw, with 20' infeed conveyor.
|
5726
|
ROSE
|
(4) ONLY. ROSE(TYPE)
HORIZONTAL RE-RIPS, 5 HP
|
8322A
|
SAFETY SPEED CUT
|
One (1) Used SAFETY SPEED CUT Model 7400 Vertical Panel Saw. Machine is in good condition.
Maximum Crosscut 64,
Max. Rip cut Unlimited,
Max. Thickness 2-1/8 ,
Has optional 3 HP 3 phase,
motor 230/460 volt,
Frame length 120,
Shipping weight 960lbs.
|
8005E
|
SALEM
|
One (1) Used 5' Salem High Strain Horizontal Bandmill Resaw. Shifting (up to 12" of lift),
Used for thin slabs to make 1" and 2" boards from the slabs. Includes setworks, Infeed rollcase available at extra cost. Will be taken out of service Feb. 8/08
|
8588
|
Salem
|
SALEM 6' LH Temposonic positioned high strain resaw, TOSHIBA 200 hp/1180 rpm
|
6646A
|
Sanborn
|
Sanborn Min-Max Portable Sawmill. 1992, 36 X 20 Log capacity. 4 Cylinder 40 HP Diesel Engine. Triple axle trailer. 4-Head block log carriage with hydraulic set. 15 GPM hydraulic pump to operate all mechanics. Log cleaner operates ahead of bandsaw to eliminating the need to debark logs. Uses 6 wide blades, 21-7 long, 19-gage (.042), 1.75 tooth space,. 80 Kerf, with silver teeth on back side. This unit will easily out produce nearly all horizontal based bandsaw mills. Like New
|
5389
|
SCHURMAN
|
22' SAWS,50Hp, 10 HP HYD
|
8128A
|
SCM
|
Used SCM M3, 12 Dip Chain Gang Ripsaw. Variable 1-1/2 HP chain drive. 50 HP, 440V, TEFC arbor drive motor. Built-in motor starters. 4 max. depth of cut. 12 max between inside and outside saws. Arbor speed 4,200 RPMs. Feed speeds from 20 to 160 FPM. 3-sets of anti-kickback fingers. Floor space 52 x 85 x 57-high. 4,000-lbs. Current bed chain will be replaced with good chain. Ripsaw was recently in service.
|
8501UU1
|
SHOP BUILT
|
One (1) Used Shop Built Ripsaw System With Movable Fence For Selective Ripping. Ideal For A Moulding Plant, Includes Scissor Lift, Powered Infeed & Out Feed Tables.
|
9005
|
Stetson Ross
|
ONE USED STETSON ROSS GANG RIP SAW
12 IN. WIDE X 4 IN. THICK CAPACITY - DUCKING TYPE CHAIN - 12 IN. SAW DIAMETER ARBOR DRIVE MOTOR IS 50 HP. -FEED WORKS MOTOR 2 HP.
VERY GOOD CONDITION
|
5707
|
STETSON ROSS
|
42" Tilting roll. Hyd. drive. 40Hp. A-1 Condition.
|
8131A
|
STETSON-ROSS
|
One (1) Used Stetson-Ross Model MR10, Heavy-Duty Dip Chain Ripsaw. 3-9/16"-thickness capacity, with 10" useable arbor and 10"-wide bed chain which is worn. Cartridge-style saw sleeve for quick set-up. 3 HP electronic variable speed drive. Two (2) sets of anti-kickback fingers. Six (6) upper press rolls allow stock as short as 17" to be fed. Arbor drive is 50 HP. No blades or sleeve. Wt. 5,500 lbs.
|
5368
|
SWEECAN
|
52' TWIN X 6' WHEEL FACE & LINE BAR TABLE 300 FPM SPEED, 40 HP DRIVES.
|
6335
|
Sweed Ven
|
Sweed Ven Core Saw
|
8498UU1
|
TURNER
|
42 Turner Tilting Single Resaw Hydraulic Feed
|
8173A
|
TURNER
|
One (1) Used Turner Model E-48 Twin Rollfeed Resaw. 48 Wheels. Self centering feed rolls or one side can be stationary for gauge sawing. Rolls run in ball bearings. Variable frequency A.C. drives for feed speeds from 20 to 300 F.P.M. and two (2) 40 HP 460 volt motors for wheel drives. Upper wheel guard.
|
8175A
|
TURNER
|
One (1) Used Turner 42 Model TSR Single Tilting Rollfeed Resaw, Four (4) 10-1/2-tall powered feedrolls tilt up to 35Ί off vertical, and feed material up to 300 FPM. Maximum stock size is 8-wide and 14-high. Wheels are solid cast and have 4-1/4-wide faces. Saws (not included) are 19-6-long, between 19 and 22 gauge (.042 to .028) plate thickness (add .007 per inch of saw width to determine typical kerf). Includes upper wheel guard, variable speed drive for feedrolls, starters, and 30 HP motor to drive wheels. Saw guides are pressure-type. Feedrolls set on both sides with outside set spring-loaded, with foot pedal to open for wide pieces.
|
5491
|
TURNER
|
60' HORIZONTAL FEED WITH 24' SLATBED FEED MC DONOUGH PRESSURE GUIDES GUIDE GRINDER 75 HP MOTOR VARI DRIVE ON FEEDWORKS 30 BLADES 9' WHEEL FACE 10' SAWS REBUILT UNDERHUNG WHEELS SETTING BED.
|
8176A
|
TURNER
|
One (1) Used Turner Model E-48, Left-Hand Single Band Tilting Rollfeed Resaw. 5-1/2-wide solid disc-style wheels. 40 HP, 440V motor with solid state starter. 25Ί tilting feedroll assembly with variable speed DC inverter drive package 10 to 300 F.P.M upper and lower saw guides. Air-tensioned feedrolls open 6 inside of sawline and 9 outside. Will center-split up to 12 or gauge saw up to 15 cant and up to 24 below upper guide. Uses 6-wide x 23-6x18-21 gauge blades. All roller and ball bearing construction. Weighs 7,500-lbs. Upper wheel guard.
|
5387
|
TURNER
|
48' WITH 6' WHEEL FACE 40 HP MOTOR 2 HP VARI DRIVE FEED DRIVE 13/16 AND 15/26 SAW THICKNESS.
|
8130A
|
TYLER
|
One (1) UsedTyler Model 3775, 36-Wide, Straight Line Dip Chain Gang Ripsaw, complete with 100 HP main arbor motor wired for 460-volts (97.4 amps). 5,000 RPM arbor speed. Machine has extra thickness capacity to rip up to 5-5/8-thick using 16-diameter sawblades, not included. Includes extra sleeve, setup stand, extra spacers, 14-diameter sawblades, and arbor hoist. Variable speed from 50 to 200 FPM. Digital readout for adjustable fence. Digital stock thickness readout. Six (6) pressure hold down rolls. Four (4) row anti-kickback fingers. Automatic feed chain lubrication. Built-in starters. Motorized arbor lift. Linear bearings on all machine slides.
|
8462A
|
TYLER
|
One (1) 1994 Tyler Model 3775, 36-Wide, Straight Line Dip Chain Gang Ripsaw, complete with 100 HP main arbor motor wired for 460-volts (97.4 amps). 5,000 RPM arbor speed. Machine has extra thickness capacity to rip up to 5-5/8-thick using 16-diameter saw blades, not included. Includes extra sleeve, setup stand, extra spacers, 14-diameter saw blades, and arbor hoist. Variable speed from 50 to 200 FPM. Digital readout for adjustable fence. Digital stock thickness readout. Six (6) pressure hold down rolls. Four (4) row anti-kickback fingers. Automatic feed chain lubrication. Built-in starters. Motorized arbor lift. Linear bearings on all machine slides.
|
6272
|
Ultimizer
|
(2) 1995 Ultimizer 15U Optimizing Cutoff saws, full optimizing, 4 grades, 3/4"-7 1/4" width capacity, 1/4"x2" adjustable thickness capacity via push button, AC Servo feed drive, 0-600 FPM, 10hp/1800RPM motor, Lut scanning camera, replaceable chip breakers, 1500 CFM dust removal, (6) grade marking stations, 6-strand infeed transfer, powered center canted infeed rollcase, powered outfeed belt conveyor with auto kick-outs, all drives and PLC controls.
|
6650A
|
Wadkin
|
One (1) Used Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw. 12 diameter blade tilts either left or right 45 degrees. 3½ tall fence opens 26 right of saw and left stops go out to 60. 220V 3-phase, 9 HP including scoring saw. Like new condition
|
9021
|
Weinig
|
Weinig Rondamat 934 Profile Grinder for grinding pattern and straight knives in and out of cutterheads. Will handle heads up to 11-13/16 dia. X 9-7/16 long. Liquid cooled (Wet) grinding for either steel or carbide tooling. 1.5 HP TEFC grinding wheel motor, variable speed. Attachments include magnification scope, head spindles including No. 1 Stetson-Ross taper, straight knife sharpening jig, digital measurement tools, and a large number of other items. Was taken out of service due to business reorganization April 2010 and is in good working condition.
|
6144F
|
WHITNEY
|
One (1) Used Whitney K-414 Straight Line Ripsaw, for parts or buyer rebuild. Table is 63" wide x 82" long. Weight about 6,000 lbs. 20 H.P., 3600 RPM, direct to a 19" blade, for cuts up to about 4" thick, and arbor raise/lower mechanism has been fixed to a stationary position. Items absent include: feed motor, starters, and five upper press rolls. Items present include: feed chain, gear box for feed, four upper press rolls, rip fence, one set of anti-kickback fingers, top & bottom dust hoods.
|
8335CC1
|
WOOD MIZER
|
One (1) Used 2006 Wood Mizer LT40HDD34 Portable Sawmill Bandsaw. Complete with all sharpening equipment and 30 (or so) blades. The unit has only 80 hours and has a 34 horse CAT 3-cyl diesel. De-barker also and heavy duty trailer package.
|
6104
|
WOODMIZER
|
Woodmizer 4-head Horizontal resaw with meri-go-round.
|
DujctzoWKhioff
|
xOooHrQKBpkVrwDuYh
|
NR1oNA lnnpehtugfdu, [url=http://tsurelvwtzul.com/]tsurelvwtzul[/url], [link=http://lmfvjkmsanoj.com/]lmfvjkmsanoj[/link], http://nfhwqfykniks.com/
|
6477
|
Yates American
|
Yates American 341 Bandsaw
|
Back
to Machinery Listings