|
|
RIPSAW  = photo available |
| Ref# |
Make |
Description |
8235V
|
CAIN
|
One (1) Used Cain 5 Panel Ripsaw. Currently in use, Removing from power in May
Roll-fed 5 panel ripsaw system with 63 width capacity. One man can operate this high productivity ripsaw with major production capacity. The arbor diameter is 3-15/16 with a 100 HP motor. Does NOT include: canted roll case feed, stacker, roller system bolted
onto front and back of this ripsaw, catwalks around the ripsaw and saw hubs or blades.
|
8398NN1
|
CANTEK
|
One (1) Used Ripsaw - Cantek - Model C10RS, Total Hp 11, Largest Hp 10, Total Amp 29.4, Voltage 230.
|
8401NN1
|
CANTEK
|
One (1) Used Ripsaw - Cantek - Model C12RS, Total Hp 16, Largest Hp 15, Total Amp 16.5, Voltage 575.
|
8512TT1
|
DIEHL
|
One (1) Used Diehl #SL-52 15HP Straight Line Rip Saw
Diehl #SL-52 Straight Line Rip Saw. 15HP. Consistent well-running unit.
220V/440V.
|
8568
|
Ekstrom Carlson
|
One (1) Used Ekstrom Carlson Model EE Straight Line Chain Feed Glue Join Edging Saw. 30 HP Saw arbor motor. Maximum thickness 31/4" with 16" dia saw blade (no blade). 5 HP feed motor with feed rates infinitely variable to 280 FPM. Triple lower infeed rollers are chain driven and are adjustable from zero to 5�. Elongated pressure bar housing assures the proper guidance across the entire table length. Rollers are spring loaded with one inch yield. Dual position and lubrication system, two outfeed rollers.
|
8129A
|
EVANS
|
One (1) Used Evans Model 3600, 5-Saw Selective Panel Ripsaw. 2 x 48 capacity. Six (6) airlift rubber-coated powered press rolls. Splined saw arbor with all five (5) saws adjustable by either electric motor or manually. 25 HP, 230/460-volt TEFC arbor drive motor, 3 HP vari-drive for feed, starters for 240-volts. Currently missing two small electric motors to move two saws
|
8295K
|
LOBO
|
One (1) NEW Lobo 14" MULTIPLE RIP SAW Model No: TRS -1014 Precision fence assures absolute accuracy Double anti-kickback fingers mounted at the infeed side provided maximum safety protection.
Auto lubrication
Maximum Cutting Depth 4-3/4",
Arbor Diameter 70 MM with 2 keys,
Spindle Length 11",
Max. Amount of Blades Per Spindle 12,
Saw Blade Size 10" ~ 14",
Table Dimensions 30" x 62",
Spindle Speed 4000 RPM,
Feeding Speed (Variable) 30 ~ 100 FPM,
Throat Depth (1st Blade) 12",
Main Motor 50 HP,
Feed Motor 2 HP,
Feed Chain Width 12",
Automatic Lubrication YES,
Minimum Work Piece Length 23",
Exhaust Hood Diameter 6 ",
N.W. 4700 LBS,
G.W. 5000 LBS.
|
8290K
|
LOBO
|
One (1) NEW Lobo 18" SINGLE RIP SAW (bottom). Model No: TRS-3018 Feeding Speed (RPM) 30 ~ 85, Throat to Blade Depth 26", Main Motor 20 HP,
Feed Motor 3 HP , Feed Chain Width 8-3/4", Automatic Lubrication YES, Minimum Work Piece Length 8"
|
8291K
|
LOBO
|
One (1) NEW Lobo 12" HOR. BAND RIP SAW Model No: BS-1212H
Max. Cutting Capacity 12" x 12" , Distance between Blade to Conveyor 1/8" ~ 12",
Saw Wheel Diameter 24" x 2,
Saw Blade Length (Width) 184" (1" ~ 1-1/2"),
Saw Blade Speed 6000 FPM,
Feed Conveyor Size (W x L) 10-5/8" x 165-1/2",
Feed Conveyor Tilt Degree 0 ~ 30
Feed Speed (Variable) 0 ~ 120 FPM,
Main Motor 20 HP ,
|
8463K
|
LOBO
|
One (1) NEW Lobo Vertical 36 Band Ripsaw with Feeder. Model BS-900H
Feed Feeder Opening 14",
Feed Feeder Speed (Variable)26 ~ 105 FPM,
Saw Wheel Drive Motor 30 HP,
Feed Drive Motor 2 HP,
G.W. 4560 LBS,
|
8289K
|
LOBO
|
One (1) NEW Lobo 16" SINGLE RIP SAW (bottom). Model No: TRS-3016
Feeding Speed (RPM) 0 ~ 90, Throat to Blade Depth 19", Main Motor 15 HP, Feed Motor 2 HP, Feed Chain Width 7", Automatic Lubrication YES, Minimum Work Piece Length 5", Exhaust Hood Diameter 4", N.W. 3200LBS, G.W. 3900 LBS.
|
8299K
|
LOBO
|
One (1) NEW Lobo 52" MULTIPLE GROOVE or RIP SAW Model No: TRS-1300G
Features:
Max. Working Width 51",
Min. Working Width 26",
Working Thickness 1/8" ~ 1",
Feed Speed 9 ~ 48 FPM,
Saw Blade Size 8",
Saw Blade Speed 2600 RPM,
Top Pressure Rollers 6,
Bottom Pressure Rollers 6,
Saw Motor 15 HP,
Feed Motor 4 HP,
Machine Size (L x W x H) 79" x 69" x 47".
|
8294K
|
LOBO
|
One (1) NEW Lobo MULT. SLICE THIN RIP FRAME SAW Model No: TRS-80F
Main Motor 20 HP,
|
8298K
|
LOBO
|
One (1) NEW LOBO MOVABLE MULTIPLE RIP SAW Model No: TRS-0816DET
Max. 12½",
Max. thickness 5-1/8",
Saw drive motor 50 HP,
Net weight 5900LBS,
|
8296K
|
LOBO
|
One (1) NEW LOBO 12" MULTIPLE RIP SAW, T.B. MOULDER Model No: TRS -1200TB
Max. Working Width 7-7/8",
Max. Working Thickness 3",
1th Bottom Spindle:
Spindle Dia 40 mm,
|
8297K
|
LOBO
|
One (1) NEW LOBO 20" MULTIPLE RIP SAW Model No: TRS -2000
Feeding Speed 15 ~ 70 FPM ,
Main Motor 60HP ,
G.W. 5000 LBS
|
8256K
|
LOBO
|
One (1) NEW 12 SINGLE RIP SAW Model No: TRS-0012
Main Motor 10 HP; Feed Motor 1 HP; Feed Chain Width 6"; Automatic Lubrication YES; Minimum Work Piece Length 12".
|
8288K
|
LOBO
|
One (1) NEW Lobo 16" SINGLE RIP SAW (top). Model No: TRS-0016
Maximum Cutting Depth 5", Arbor Diameter 1", Max.
Saw Blade Size 10" ~ 16", Table Dimensions 40" x 70", Spindle Speed 3600 RPM, Feeding Speed (RPM) 30 ~ 85, Throat to Blade Depth 20", Main Motor 15 HP, Feed Motor 1 HP, Feed Chain Width 6", Automatic Lubrication YES, Minimum Work Piece Length 12"
|
8292K
|
LOBO
|
One (1) NEW LOBO 16" HOR. BAND RIP SAW Model No: BS-1616HR
Max. Cutting Capacity 16-1/2" x 16-1/8,
Distance between Blade to Conveyor 1/4" ~ 10-5/8",
Saw Wheel Diameter 32" x 2,
Saw Blade Length (Width) 184" (2"),
Saw Blade Speed 6150 FPM,
Feed Conveyor Size (W x L) 16" x 165-1/2",
Return Conveyor (L x W x H) 100" x 24" x 32",
Feed Speed (Variable) 0 ~ 120 FPM,
Main Motor 30 HP,
Saw Blade Lift Motor 1/2 HP,
Feed Conveyor Motor 2 HP,
Return Conveyor Motor 1 HP ,
Dust Hood 4" x 2,
Machine Size 128" x 130" x 78",
N.W. 4000 LBS.
|
8568
|
Mattison
|
One (1) Used Mattison Model 202 Fast Feed Straight Line Ripsaw. Single saw unit will handle stock down to 7-1/2"in length, up to 4" thick, and of any width out side saw and up to 24-1/2"inside saw. Takes up to 14" dia. Sawblade on a 1-1/2" dia. Spindle. Feed speeds from 62 to 186 feet per minute. Arbor motor is 20 HP, 3,600 RPM, 220/440 Volts, 3-phase.
|
8318JJ
|
MEREEN-JOHNSON
|
One (1) Used Mereen-Johnson Gang Ripsaw, Model 3300-DCS. 12 width capacity,Short Block machine (14 single fed minimum length, 6 butt fed minimum length), 50 hp arbor, 3 hp feed (30-150 fpm).
|
8134A
|
MEREEN-JOHNSON
|
One (1) Used Mereen Johnson Model 424 DC Heavy Duty Chain Feed Multiple Ripsaw. 3HP feed is variable to 150 feet per minute. 2-3/16 arbor with direct connect 65HP TEFC 230/460 volt 3500 RPM motor. 3-1/2 x 24 (or wider) capacity. Rubber inserts in bed chain slats prevent marking. Includes many blades, sleeves, and spare parts.
|
8234V
|
MEREEN-JOHNSON
|
One (1) Used Mereen-Johnson 5 Panel Feed, Rip & Stack System
Ripsaw is Model 435-H/R.F. Roll-fed 5 panel ripsaw system with inbound chains to Burelbach layer rake feeding system and Burelbach outbound stacking system leading to outbound chains. Two hydraulic pumps handle the entire system. One hydraulic pump is missing entirely and the electric motoris missing off of the remaining unit (price has been reduced to compensate for this). One man can operate this high productivity ripsaw and material handling system with major production capacity. The arbor diameter is 2-5/8 with a 100 HP motor. Length capacity of 6 0 up to 18 6 long panels.
Thickness capacity of Ό to 1-1/2. Width capacity up to 65.
|
8132A
|
MEREEN-JOHNSON
|
One (1) Used Mereen-Johnson Model 212 DC Multiple Blade Straight Line Ripsaw. 12 arbor capacity 4 maximum thickness capacity, minimum length 16. Glue joint minimum length 24 Posi-Feed bed with two precision Mereen-Johnson Double-Vee feed chains, structural aluminum slats with replaceable steel backed rubber inserts. 2 HP feed motor 30-150 FPM, 60 HP belt driven arbor motor wired 460V. Air loaded press rolls for consistent hold down pressure. Includes an extra 80mm OD Sleeve and Spacers.
|
8127A
|
MEREEN-JOHNSON
|
One (1) Used Mereen-Johnson Model No. 555-A, 48 Wide Slat Bed Selective Panel Ripsaw, Currently equipped with four (4) Saw blades and four (4) hold down assemblies which can be set to any location in 48 width. Will handle 2 thick material. Includes starters, power hoist motor, arbor motor, and variable speed bed chain drive. TEST RUN. *To make this machine 80, it will require a new Arbor.
|
8133A
|
OLIVER
|
One (1) New OLIVER Model 4925 Straight Line Ripsaw. 12 diameter blade X 1 arbor maximum ripping width 18, minimum stock length 8. 15 HP, 3 phase motor 220/440V, 2 HP variable speed feed motor 50-130 fpm 3019 lbs. 66 X 45½ X 63 shipping size.
|
5622
|
PORTLAND IRON WORKS
|
PIW SELECTIVE RIP SAW, 5 SAW, 10 BOARD MEMORY, 2 HOGGING HEADS, INFEED TILT HOIST, GRADING DECK, CONVEYORS. COMPLETE.
|
5726
|
ROSE
|
(4) ONLY. ROSE(TYPE)
HORIZONTAL RE-RIPS, 5 HP
|
8128A
|
SCM
|
Used SCM M3, 12 Dip Chain Gang Ripsaw. Variable 1-1/2 HP chain drive. 50 HP, 440V, TEFC arbor drive motor. Built-in motor starters. 4 max. depth of cut. 12 max between inside and outside saws. Arbor speed 4,200 RPMs. Feed speeds from 20 to 160 FPM. 3-sets of anti-kickback fingers. Floor space 52 x 85 x 57-high. 4,000-lbs. Current bed chain will be replaced with good chain. Ripsaw was recently in service.
|
8501UU1
|
SHOP BUILT
|
One (1) Used Shop Built Ripsaw System With Movable Fence For Selective Ripping. Ideal For A Moulding Plant, Includes Scissor Lift, Powered Infeed & Out Feed Tables.
|
8131A
|
STETSON-ROSS
|
One (1) Used Stetson-Ross Model MR10, Heavy-Duty Dip Chain Ripsaw. 3-9/16"-thickness capacity, with 10" useable arbor and 10"-wide bed chain which is worn. Cartridge-style saw sleeve for quick set-up. 3 HP electronic variable speed drive. Two (2) sets of anti-kickback fingers. Six (6) upper press rolls allow stock as short as 17" to be fed. Arbor drive is 50 HP. No blades or sleeve. Wt. 5,500 lbs.
|
8130A
|
TYLER
|
One (1) UsedTyler Model 3775, 36-Wide, Straight Line Dip Chain Gang Ripsaw, complete with 100 HP main arbor motor wired for 460-volts (97.4 amps). 5,000 RPM arbor speed. Machine has extra thickness capacity to rip up to 5-5/8-thick using 16-diameter sawblades, not included. Includes extra sleeve, setup stand, extra spacers, 14-diameter sawblades, and arbor hoist. Variable speed from 50 to 200 FPM. Digital readout for adjustable fence. Digital stock thickness readout. Six (6) pressure hold down rolls. Four (4) row anti-kickback fingers. Automatic feed chain lubrication. Built-in starters. Motorized arbor lift. Linear bearings on all machine slides.
|
8462A
|
TYLER
|
One (1) 1994 Tyler Model 3775, 36-Wide, Straight Line Dip Chain Gang Ripsaw, complete with 100 HP main arbor motor wired for 460-volts (97.4 amps). 5,000 RPM arbor speed. Machine has extra thickness capacity to rip up to 5-5/8-thick using 16-diameter saw blades, not included. Includes extra sleeve, setup stand, extra spacers, 14-diameter saw blades, and arbor hoist. Variable speed from 50 to 200 FPM. Digital readout for adjustable fence. Digital stock thickness readout. Six (6) pressure hold down rolls. Four (4) row anti-kickback fingers. Automatic feed chain lubrication. Built-in starters. Motorized arbor lift. Linear bearings on all machine slides.
|
6144F
|
WHITNEY
|
One (1) Used Whitney K-414 Straight Line Ripsaw, for parts or buyer rebuild. Table is 63" wide x 82" long. Weight about 6,000 lbs. 20 H.P., 3600 RPM, direct to a 19" blade, for cuts up to about 4" thick, and arbor raise/lower mechanism has been fixed to a stationary position. Items absent include: feed motor, starters, and five upper press rolls. Items present include: feed chain, gear box for feed, four upper press rolls, rip fence, one set of anti-kickback fingers, top & bottom dust hoods.
|
6477
|
Yates American
|
Yates American 341 Bandsaw
|
Back
to Machinery Listings