|
|
RESAW_SAWMILL  = photo available |
| Ref# |
Make |
Description |
6089
|
ALBANY
|
Albany Resaw 6' Horz. hi-strain.
|
8013E
|
C A E
|
One (1) Used 6' CAE High Strain Quad Resaw with linear positioner cylinders. Infeed rollcase
Linebar c/w two (2) hydraulic driven pressrolls. Bandmill quick change covers. Bandmill control panels. Four (4) WEG 200 HP motors.
|
8000E
|
C A E
|
One (1) Used CAE 6’ left hand double column Band Resaw. With Infeed rollcase, heavy duty fabricated steel frame. Infeed linebar, heavy duty fabricated steel frame c/w fixed linebar. Outfeed Linebar, heavy duty fabricated frame c/w fixed linebar. Outfeed rollcase. No hydraulic power unit, no main arbor motors. 11" wheel face, Autolube system, motorized guide.
|
6320
|
CAE
|
Air Strain, Temposonic Shifting, Complete With: 250 hp Motor, 250 hp Starter, Double 40 hp Hydraulic Support Unit, Shifting Top Guide, Control Console, Flare Infeed / Outfeed System, 18" x 22' Infeed Rollcase w/ Fence & Drive, 18" x 11' Infeed Rollcase w/ Fence , Drive & 3 Vertical Press Rolls, 32" x 20" Outfeed Rollcase w/ Drive & Shifting Splitter, 42" x 25' Outfeed Rollcase w/ Drive
|
8003E
|
KOCKUMS
|
One (1) Used 6' Kockums high strain Slant Resaw. CAE feedworks and linebar, shifting outfeed conveyer for slab separation linear positioner on Bandmill, control console, 150 hp, Top wheel 1" from edge, Pacific Fluid System hydraulic unit - 2 - 40 hp pumps, 1-1/2 hp circulating pump, 300 gallon tank, 50 gallon tank on stand.
|
5481
|
L&B
|
5', OVERHUNG HORIZONTAL, HIGH STRAIN
|
6345A
|
McDonough
|
McDonough 62” Super-Duty Air Strain Linebar Resaw, including McDonough shifting bar linebar table, with right side 10” x 10’ chromed bar, two (2) air-tensioned hydraulic-driven Coleman tooth style press rolls, three (3) 24” x 8-1/2” knurled & chromed infeed bed rolls, one (1) knurled & chromed 12” x 8-1/2” outfeed bedroll, maximum opening of 24”-wide with 12” each side of sawline, 12” stroke hydraulic linear positioner cylinder with servo valve and Temposonics wand, setworks, and feed drive power packs.
.
|
8180A
|
McDonough
|
One (1) Used McDonough 62” Super-Duty Air Strain Linebar Resaw, including McDonough shifting bar linebar table, with right side 10” x 10’ chromed bar, two (2) air-tensioned hydraulic-driven Coleman tooth style press rolls, three (3) 24” x 8-1/2” knurled & chromed infeed bed rolls, one (1) knurled & chromed 12” x 8-1/2” outfeed bedroll, maximum opening of 24”-wide with 12” each side of sawline, 12” stroke hydraulic linear positioner cylinder with servo valve and Temposonics wand, setworks, and feed drive power packs.
|
5684
|
OPTIMILL
|
RESAW SYSTEM CONSISTING OF:
5Hp SLOW DOWN ROLL ASSEMBLY. TILTING LANDING DECK. 7.5Hp "S" DRIVE TRANSFER DECK W/ SETS OF DUCKER ARMS. HYDRAULIC FEEDROLL SYSTEM. 75Hp X 30" COLLARED SAW ASSEMBLY (5 SAWS INCLUDED). OUTFEED TIPPLE GATE. 7.5 Hp OUTFEED BELT 12" X 50'. OPERATING CONSOLE, VALVES, PHOTEYES, ETC.
|
8588
|
Salem
|
SALEM 6' LH Temposonic positioned high strain resaw, TOSHIBA 200 hp/1180 rpm
|
8005E
|
SALEM
|
One (1) Used 5' Salem High Strain Horizontal Bandmill Resaw. Shifting (up to 12" of lift),
Used for thin slabs to make 1" and 2" boards from the slabs. Includes setworks, Infeed rollcase available at extra cost. Will be taken out of service Feb. 8/08
|
5389
|
SCHURMAN
|
22' SAWS,50Hp, 10 HP HYD
|
5368
|
SWEECAN
|
52' TWIN X 6' WHEEL FACE & LINE BAR TABLE 300 FPM SPEED, 40 HP DRIVES.
|
8498UU1
|
TURNER
|
42” Turner Tilting Single Resaw Hydraulic Feed
|
6104
|
WOODMIZER
|
Woodmizer 4-head Horizontal resaw with meri-go-round.
|
Back
to Machinery Listings