|
|
RESAW_HORZ  = photo available |
| Ref# |
Make |
Description |
8238A
|
BAKER
|
One (1) Used Baker Model “BBR-0” Horizontal Single Band Resaw 28” wheel diameter, with 6” wide conveyor belt (no return conveyor). Height thickness adjustment via hand wheel on conveyor. Mechanical tensioned holddown roll. 20 HP motor with starter dual voltage 60 Hz. wired 240 volts. Physical size 7ft. square. Weight 1,750 lbs. This is the Baker "A" basic model it can be used to cut boards, cants, or reclaim slabs. This machine will process a timber up to 7" wide by 7" tall in any desired length. The hydraulic variable speed feed works is adjustable from 0 to 120 ft pr min. This saw covers a large range of applications from small shops to large facilities. The Baker "A" Band Resaw models are simple to operate and maintain. With few moving parts and few adjustments, even new employees quickly master the saw. Bandsaw blades will range in price depending on size and type and quantity that you purchase; the range is between $13.00 to $17.00 each. This has a shop made hopper feed and plastic holddown that can be taken off.
|
8558
|
Baker
|
Baker single horizontal Resaw c/w 6" return belts, transfers, de-duster.
|
8561
|
Brewer
|
Brewer Resaw (2) head horizontal band resaw, Model BR-2B 2000 with 6" feed belt & return belt, hydraulic unit and controls
|
8489A
|
L & B
|
One (1) Used L & B 6 Ft Horz. Band Resaw. Csmi/Letson Hsa-1 Single Set Temposonic Positioned Full Air Strain 6' Horizontal Bandmill W/Toshiba 200 Hp/1188 Rpm, 30"X14' Feed Thru Rollcase W/Knurled & Smooth Rolls, Top Hold Downs, Accu-Lube System, 20' Hydraulic Driven Infeed Rollcase, Spare Saws, Guides In Filing Room, Marked Controls & Electrics 9305-0156
|
8247K
|
LOBO
|
One (1) NEW HORIZONTAL BAND RESAW, Model No: BS-1212HR, 12" X 12"
It is equipped with a digital controller for convenient and accurate thickness setting...
The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
Variable feed
The cast iron saw blade wheels.
Tilt 30 Degree Feed Speed (Variable) 20 ~ 90 FPM; Drive 15 Hp;
Saw Blade Lift Motor 1/2 HP;
Feed Conveyor Motor 1 HP;
Dust Hood 4" x 1; Machine Size 88" x 85" x 74",
N.W. 2500 LBS.
|
8240A
|
McDONOUGH
|
One (1) Used 1996 McDonough Model SD54A Tandem Twin 54” Horizontal Resaw. 20” wide slat bed runs through both resaws at 36” fixed bed height. Both resaws shift vertically 6” and press rolls open to accept up to 14” thick. Saw setting is through hydraulic motors controlled by Temposonics Probes mounted on each machine and managed by a PLC control. 21’ infeed roll case (not pictured) is heavy duty and includes jump chains. Outfeed rollcase includes sweep chains, and 3-way tipple separator system. Five (5) bandsaw blades included. Four (4) sets of three each air tensioned pressrolls are hydraulic powered. Wheel drive motors are 100 HP 1800 RPM 460V TEFC. Resaws appear in excellent condition. Current new replacement cost for the resaws including infeed and outfeed is estimated at over $400,000.
|
5491
|
TURNER
|
60' HORIZONTAL FEED WITH 24' SLATBED FEED MC DONOUGH PRESSURE GUIDES GUIDE GRINDER 75 HP MOTOR VARI DRIVE ON FEEDWORKS 30 BLADES 9' WHEEL FACE 10' SAWS REBUILT UNDERHUNG WHEELS SETTING BED.
|
Back
to Machinery Listings