|
|
PRESS  = photo available |
| Ref# |
Make |
Description |
8017A
|
BLACK BROS.
|
Black Bros. 51” Top and Bottom Pinch Roll Machine, Top & Bottom Coater
Opens to approx. 3” max. thickness, 51-1/4” wide coating rolls. Grooved rolls are 7-1/8” dia., Each coating roll has a trough that butts up against the coating roll and has a handwheel adjustment to set the clearance. A bottom pan with drain collects the overflow. This machine does not utilize end dams between the trough and coating roll. ¾ hp gearmotor, starter and power cord with plug.
|
6376
|
Globe
|
Globe 4' x 8' 40 opening, 4 chain.
|
8142H
|
GLOBE
|
One (1) Used Globe 48”x 96”, 40" daylight opening, 4 feed thru chains. Complete with hydraulic power pack, ready to ship.
|
8092A
|
GRIGGIO
|
One (1) Used GRIGGIO Pneumatic Case Clamp, single bay, 8’-wide x 5’-high. One (1) moveable, vertically positioned clamping beam with three (3) horizontal clamps and four (4) adjustable vertical clamps. Built-in controls with pressure gauge.
|
8062A
|
HANKISON
|
Hankison Model DH 2100 HHL Heatless Coalescing Air Dryer. Capacity is 2100 CFM at 100 PSIG with max pressure of 120 PSIG.
|
8285ZZ
|
HESS
|
One (1) Used Hess Model HV1 pneumatic press. Has 4 vertical pressure aggregates and 2 horizontal pressure aggregates. Purchased new May 2007 for $ 9940.00
|
8286ZZ
|
HESS Nora H Quattra
|
One (1) Used Hess Nora H/Quattra Hydraulic Door Press. Purchased New April 2007. Complete With 3 Vertical Pressing Beams With Hand-Hydraulic Cylinders, 1 Horizontal Pressing Beam With 2 Hand-Hydraulic Cylinders. Full Height, Machined Squaring Reference(Left Side) 80 Mm (3 1/8") Working Depth, 120" Long X 70"High. Additional Equipment: 1 Piece Additional Vertical Pressing Beam, 1 Piece Plug On Type Face Pressure Device. $15,317 New.
|
8227VV
|
INGERSOLL-RAND
|
Ingersoll- Rand Rotary Screw Air Compressors.
Model Number SSR-EP 125.
Capacity 571 C.F.M. Each;
Operating Pressure 125 P.S.I.G.;
Drive Motor 125 H.P. Each;
480 Volt- 3 Phase;
Both are equipped with intellisys controls and are water cooled
|
6498
|
Kaeser
|
1988 model AS 35, s/n 374737, 40 HP, 110 psi, air
cooled, nice cabinet.
|
8445MA2
|
KALLESOE
|
One (1) Used , Kallesoe Hot Press. Hot Water Heated Hot Press With Hydraulic Up And Down, 12 Rams, Side Pressure 6 Rams, Control Station, Infeed Table, Outfeed Roller Conveyor, Hydraulic Unit, Transformer, Electrical Heat, 52" X 119". Available Now
|
8319JJ
|
L & L
|
One (1) Used L&L Electronic Glue Press, Model GA-100.
20 KW generator, 50” x 100” platen, 50” x 18’ powered infeed conveyor.
|
6600
|
Lobo New
|
Lobo Industrial Air Comperssor, Tank Mounted.New 10 Hp
|
5702
|
MANN RUSSELL
|
1000 RF GLUER. 3' X 7' CAPACITY. WITH IN & OUTFEED CONVEYORS. 71 kva. S/N: 100127.
|
9000
|
Quincy
|
QUINCY NW AIR COMPRESSOR MODEL 1500A ROTARY SCREW WITH SIEMAN ALLIS 300 HP. 447 "T" FRAME 460 VOLT MOTOR
54 IN. X 54 IN. HEAT EXCHANGER WITH 40 IN. 10 BLADED FAN MOUNTED ON A 7-1/2 HP. TEFC MOTOR.
|
8135H
|
QUINCY
|
Quincy North West Air Compressor, model 490-A, 100 HP, 220-440/3/60; 1775 RPM, 28,935 hours.
|
8200P
|
QUINCY NORTHWEST
|
Quincy Northwest Rotary Screw Air Compressor Assembly, Model QNW-500-D3, With Air-Cooled Lubricant Cooler, Complete With A 150 HP, 1800 RPM, C-Flange Mounted, 3/60/230/460 Volt, Open Dripproof, Motor. The Assembly Is Complete With Fill Of Synthetic Compressor Lubricant And Standard Equipment.
Includes Air-Cooled Aftercooler With Moisture Separator And Automatic Condensate Trap, Mounted, Pre-Piped And Tested. And MOTOR CONTROL: Magnetic X-Line Starter, 150 HP, 3/60/460 Volt, In NEMA 1 Enclosure With Operator Switch In Compressor Panel, Mounted, Wired And Tested. Also Unloaded Horsepower Constant Speed Control Package Complete With Timed Shutdown And Automatic Restart, Installed. Shipping Weight Is 4,800 Lbs.
|
8199P
|
QUINCY NORTHWEST
|
Quincy Northwest Rotary Screw Air Compressor Assembly, Model QNW-273, With Air-Cooled Lubricant Cooler, Complete With A 75 HP, 1800 RPM, C-Flange Mounted, 3/60/230/460 Volt, Open Dripproof,
Energy Efficient Motor (Meets Or Exceeds EPACT Standard Rating Of 94.1%),
With A 1.25 Service Factor. The Assembly Is Complete With Fill Of Synthetic Compressor Lubricant And Standard Equipment. Includes: AFTERCOOLER.
With Moisture Separator And Automatic Condensate Trap, Mounted, Pre-Piped And Tested. And MOTOR CONTROL: Magnetic X-Line Starter, 75 HP, 3/60/460 Volt, In NEMA 1 Enclosure With Operator Switch In Compressor Panel, Mounted, Wired And Tested. Also Unloaded Horsepower Constant Speed Control Package Complete With Timed Shutdown And Automatic Restart, Installed. Shipping Weight Is 4,100 Lbs.
|
8185H
|
SERGIANI
|
One (1) Used SERGIANI - 10 Opening Hot Press. 5’x10’ Opening; Complete with Loading/Unloading, and Hydraulic Unit. Excellent Overlay Press. In-feed/Lay-up System and Auto Out Feed System.
|
8228VV
|
SULLAIR
|
Sullair Rotary Screw Air Compressors.
Model Number 16-60L;
60 H.P Motors Each;
460 Volt -3 Phase;
Fan Cooled.
|
8581
|
Sullair
|
Sullair Energy Efficient Air Compressor
One (1) Used Late Model Low Hour Sullair Energy Efficient Air Compressor.
Model V-200-TS-200L/A two
stage compressor with 200 HP, premium
efficiency Toshiba 460 volt motor,
variable frequency drive and computer
compatible microprocessor
controller.Manufactured in 2004. Has
only 8,700 total hours. Rated
1,000 acfm at 100 psig.
|
8136H
|
SULLAIR
|
Sullair Screw Air Compressor, 25-150L Westinghouse 150 HP, 220-440/3/60; 1770 RPM. Ready to go to work.
|
8209R
|
SUPERIOR
|
One (1) Used Superior Pre Press 4ft x 8ft. Chain Load and Unload. 40” Daylight with Hydraulic Power Unit.
|
8372GG
|
TAKAGI
|
One (1) Used Takagi Press • Three 7” rams with 2 jack rams • Steam heated • Single opening • 24” x 12’ platen
|
6247W
|
Washington Iron Works
|
Four (4) Used Washington Iron Works Presses MD 1500T-6458
|
8208R
|
WILLIAMS WHITE
|
One (1) Used Williams White 28 Opening Hot Press. Steam or hot Oil. Platen size, 108” x 54”; Complete with hydraulic Loader & Unloader, press controls, platens, 1-7/8" thick, 3 1/2 daylight loading Spar-Tek elevator, Durand Charger, pie rack and unloaded (chain). Disassembled and Ready to ship.
|
8207R
|
WILLIAMS WHITE
|
Two (2) Used Williams White 24 Opening Hot Press. Steam or hot Oil. Platen size, 106” x 54”; Two (2) Used Williams White 24 Opening Hot Press. Steam or hot Oil. Platen size, 106” x 54”; Complete with hydraulic Loader & Unloader, press controls, platens, 1-7/8" thick, 3 1/2 daylight loading Spar-Tek elevator, Durand Charger, pie rack and unloaded (chain). Disassembled and Ready to ship.
|
8368GG
|
YAMAMOTO
|
One (1) Used Yamamoto Hot Press • Single opening • Eight 8” rams and 3 jack rams • Adjustable opening with up to 10” of daylight • Platen is 58” x 21’ • Top mounted hydraulic unit • Down acting • Steam heated
|
8369GG
|
YAMAMOTO
|
One (1) Used Yamamoto Hot Press • 30 opening press • Daylight is 4.5” • Press plates are 54” x 108” x 1.75” • One man loader, charger and pie rack with automatic unloader • Hydraulic system with accumulation tank
|
8371GG
|
YAMAMOTO
|
One (1) Used Yamamoto Prepress • Platen is 54” x 108” • 60” of daylight • 500 ton press • Two chain carry thru with cylinder jump • New in 1999
|
8370GG
|
YAMAMOTO
|
One (1) Used Yamamoto Hot Press • 45 opening press • Steam heated • Type HEL-500-45WSA • 500 tons capacity • Mfg No. 3439 • Date of manufacture 1996 • Platens are 106’ x 53’ x 1.57” (2700x1350x40 - mm) • Daylight is 2.75” (70mm) • One-man loader and Automatic charger
|
Back
to Machinery Listings