|
|
HOG  = photo available |
| Ref# |
Make |
Description |
9052
|
APACHE
|
Apache Model 4 Heavy Duty Hammer Hog. Direct connected 150 HP Lincoln 460V 1,200 RPM motor. 24 X 36 Top infeed opening. 1/2 screen holes. Two built-in flywheels and external flywheel. Heavy hammers and cog-style rotor discs are in nearly new condition. With 1�1/2 screen capacity is 4 TPH in wood and 12 TPH in bark.
|
8399MM1
|
CUMMINS
|
One (1) Used Cummins Portable Hog, 1997 MODEL 175 Biogrind, 260Hp, self contained unit, belt driven.
|
8098F
|
Diamond Iron Works
|
One (1) Used Diamond Iron Works 25 H.P. Vee-Drum Knife Hog with 13-3/4" x 14" vertical infeed and bottom discharge. Weight 3,500 lbs.
This has 25 H.P. @ 1200 RPM direct-coupled to a heavy vee-drum rotor with six, 4-3/4" long staggered knives per side (12 total). Motor is mounted on a common base and is 9-lead for 220/440 voltage. No starter, infeed hopper, bottom screen, or guard for motor coupling. 82" long x 44" wide x 44" high.
|
8395MM1
|
FINK
|
One (1) Used FINK F370 Drop Feed Grinder Hog. Type drop feed F370, Hopper opening 24 x 36, Overall width 46, Output Ύ ton per hour. Rotor Dia. 14 1/2, Main drive motor 20 Hp, RPM 120. No of cutter 20. Screen size 1. Control system 1, Manual 1. If your looking for low RPM machine to process material in a remanufacturing plant this would fit the bill.
|
8573
|
FINK
|
New FINK WOOD GRINDERS 370/400 suitable for trim ends and strips. Main drive motor 120 RPM Rotor Motor 20 HP Feed Motor infeed 2 HP infeed opening of grinder 15 Ύ inch Number of infeed rolls 3 driven rollers (2 upper, 1 lower) Rotor diameter 14 ½ inch,Screen size Ύ inch. Output per hour approx. 40 to 80 cf/hour. Infeed vibrating conveyor, 16 ft length, electric motors with gear reducers (no hydraulics!!) Machine controls Siemens PLC Siemens Electric Components Baldor Motors Located in BC
|
8073A
|
GLOBE
|
One (1) Used Globe 18 Capacity Veneer Hog. Powered Infeed Rolls With Gear Motor Drive. Hog rotor powered by 30HP 208-220/460 volt motor. Average condition. Good rotor. To be cleaned, painted and shop run.
|
8491E
|
GRUENDLER
|
One (1) Used Gruendler Hog, Model 50XHD
- Model 50XHD disc
- Swing hammer type hog
- 500 HP motor
- Rebuilt - never installed
- Some spare parts such as swing hammers, set of manganese grizzly bards, transition chutes
|
8493E
|
GRUENDLER
|
One (1) Used Gruendler Hog, Model 5660
-900Hp Motor
- Spare parts - breaker bars, 3 different sizes of grates & hammers
|
8490E
|
GRUENDLER
|
One (1) Used Gruendler Hog, Model 50XHD
- Model 50XHD disc
- Swing hammer type hog
- 400 HP motor
- Rebuilt - never installed
- Some spare parts such as swing hammers, set of manganese grizzly bards, transition chutes
|
8492E
|
GRUENDLER
|
One (1) Used Gruendler Hog, Model 50XHD-500Hp,
- Model 50XHD disc
- Swing hammer type hog
- Some spare parts such as swing hammers, set of manganese grizzly bards, transition chutes
|
9041
|
Jacobson
|
JACOBSON PULVERIZE - MODEL 2436D 24" DIAMETER ROTOR X 36" WIDE WITH A DIRECT COUPLED 200 HP / 3575 RPM MOTOR /460 VOLT 3 PHASE FEED OPENING IS 16" X 36" 3/4" SCREEN OVER ALL LENGTH 8' 4" FRONT TO BACK 4' OVERALL HEIGHT 5' 6" - VERY GOOD CONDITION
|
8450CC
|
JACOBSON
|
One (1) Used Jacobson Series 1 Hammermill Pulverizer. Is Used For Grinds That Require Medium To Fine Particle Size Reduction. It Can Be Used All Materials: Wood Waste, Chips, Md P 241DC1
|
8440CC
|
JEFFERY
|
One (1) Used Jeffery Hammer Hog. Model WB48, 36 Opening. Excellent condition. Extra set of new hammers
|
8074A
|
JEFFREY
|
One (1) Used Jeffrey Model 76WBH, Heavy-Duty, Horizontal Feed Hammer Hog. Fixed, 3-lobe, 6-way hammers attach with two pins each. 30 x 56 infeed opening. 85 to 130 tons per hour output at 3 minus. Top infeed powered chain hold down assembly with air cylinders, and SM cyclo drives. 700 HP, 890 RPM, 2300-volt, direct-connected motor. Automatic reduced voltage starter. Operators consoles with chair. Spare new screen grids.
** Conversion to standard vertical or top feed at no additional
charge.
|
9022
|
Jeffrey
|
One (1) Used Jeffrey Model 34WBS Heavy Duty Hammer Hog.
Direct couple 150 HP 1790 RPM 460 V TEFC 1.15 service factor motor. Mounted on 14 X 6 wide flange base. Hog has 24 X 5 flywheel and will handle round wood up to 4 dia X 18 long. Feed opening is 21 X 32. Hog appears in good condition.
|
8077A
|
KIMWOOD
|
One (1) Used Kimwood 36 X 36 Rotary Hog. 30 tons per hour capacity. 250 HP, 1200 RPM, 460 Volt TEFC motor. Hydraulic case opener. Ideal for log yard waste or stringy bark. Common frame with motor, hog, and hydraulic package. Includes infeed chute.
|
8400MM1
|
McCLESKY
|
One (1) Used 1998 McCleskey Portable Rotary Screening System, 6, Complete With Diesel Power Plant. 130Hp Perkins Caterpillar Diesel, Totally Self Contained, Hydraulically Driven Machine, Self Leveling Legs , Hydraulic Fold And Unfold Conveyors, Variable Speed Feeder, 2 Discharge Conveyors.
|
8242A
|
MID-OREGON
|
One (1) Used Mid-Oregon Horizontal Feed Mini-Hog with 30 HP 1765 RPM TEFC 230/460 volt direct connected motor. Can also be set up for drop feed. Hog will process edgings with a maximum cross section of 1-1/2 X1-1/2 at a rate of 90 cu. ft/hr. starter included. No conveyor. Appears in good condition.
|
8457A
|
MID-OREGON
|
One (1) Used Mid-Oregon Horizontal Feed Mini-Hog with 30 HP 1765 RPM TEFC 230/460 volt direct connected motor, S/N 17801 101. Can also be set up for drop feed. Hog will process edgings with a maximum cross section of 1-1/2 X1-1/2 at a rate of 90 cu. ft/hr. starter included
|
8269Q
|
MITTS MERRILL
|
One (1) Used Mitts Merrill Knife Hog. 25hp; 10 x 10 Top Feed.
|
6300
|
Montgomery
|
Montgomery Punch & Die-Style Vertical Feed Blo-Hog, 13-1/2 x 18 top infeed opening. Built-in blower top discharge. 75 HP motor. Very good condition
|
8265Q
|
MONTGOMERY
|
One (1) Used Montgomery Wood Hog ( Knife ), Model # 26hd40 75h.P. Top Feed. Top Feed Opening 13"X26". Features "Punch & Die" Style Hogging Action With Fixed (Non-Swinging) Hammers. Outlet Pipe Approx. 18 1/2" Dia. It is gravity feed, outfeed is rectangular; hook up vacuum or blow pipe at bottom. The estimation for the size of blower needed for stand alone operation:
Minimum would be 50HP; 36 diameter wheel x 12
|
5675
|
MONTGOMERY
|
17 X 34" OPENING. FLYWHEEL, 100Hp INFEED SHUTE. SUB BASE.
|
5675
|
MONTGOMERY
|
17 X 34" OPENING. FLYWHEEL, 100Hp INFEED SHUTE. SUB BASE.
|
8500UU1
|
MONTGOMERY
|
One (1) Used Montgomery Blo-Hog Model 1340S315F26HDL, , completely rebuilt with new rotor/arbor/hammers and anvils. Factory balanced
|
8229VV
|
MONTGOMERY
|
One (1) Used Montgomery H.D Model Eat-Rite Hog.
Size-ER 26" S47F-L;
with a 100 H.P-1750 R.P.M. -440 volt- 3 phase motor, Frame 445U,
All mount on a common base. Bottom Discharge.
|
9008
|
Montgomery
|
ONE MONTGOMERY BLO-HOG MODEL HD-26
17-40 FAN DISCHARGE -4" X 36" FLYWHEEL 26" WIDE THROAT OPENING RECONDITIONED WITH REBUILT BREAKER RINGS ANVILS AND TEETH. NEW SPHERICAL ROLLER BEARINGS AND HOUSINGS SHAFT HAS LESS THAN .003 RUN OUT ALL CASINGS HAVE A 90% OR GREATER SERVICE FACTOR. PRICE INCLUDES INFEED CHUTE.
|
8255RR
|
MONTGOMERY
|
One (1) Used Rebuilt Montgomery Hog, Model ER18HD. 18 X 17 Infeed Stout, Top Feed, Bottom Discharge With 4 Thick X 36 Diameter Flywheel. New SKF 3-15/16 Spherical-Roller Bearing, Cutter Knives and Avils, Balanced Rotor. Machine Is In Like New Condition And Requires A 401-75Hp Drive Motor.
|
9006
|
Montgomery
|
ONE USED MONTGOMERY HORIZONTAL FEED HOG
MODEL 34PM HZ-ER
MOUNTED ON A 8 IN. WIDE FLANGE SUB-BASE BEAM
2 IN. SCREEN 6 IN. X 36 IN. FLYWHEEL INFEED OPENING OF 8 IN. X 34 IN. BELT DRIVE BOTTOM DISCHARGE - UP TO 8 TONS PER HOUR - A 150 HP. MOTOR IS RECOMMENDED.
|
8075A
|
Montgomery
|
One (1) Used Montgomery Model ER33CSKC Heavy-Duty Fixed Hammer Hog. 4 x 8 grate bar openings. 25 x 33 top infeed opening. Includes motor base. Swing-away anvils to protect rotor. Extra large 32-diameter rotor for high production. Average production in bark with 4 grate openings is 37 tons per hour. Weight is 14,000-lbs., less motor.
|
9007
|
Montgomery
|
ONE USED MONTGOMERY MODEL ER 18S315 HAMMER HOG
HAS A 14 IN. X 18 IN. FEED OPENING - 36 IN. DIAMETER X 4 IN. THICK FLYWHEEL - WITH A 75 HP. DIRECT COUPLED TOSHIBA MOTOR - 1180 R.P.M. - ODP - MOUNTED ON A COMMON SUB BASE - SPACE NEEDED FOR MACHINE IS 10 FT. LEFT TO RIGHT AND 3 FT.6 IN. FRONT TO BACK AND 4 FT. 8 IN. HIGH
|
8465A
|
MONTGOMERY
|
One (1) Used Montgomery Model ER18S315FHDL Blo-Hog with 13 X 18-1/2 top infeed, 2 dia. screen, 4 thick X 36 dia. flywheel and 75 HP direct coupled motor, coupling, elevated base and discharge transition.
|
6301A
|
Montgomery
|
Montgomery Model ER39 PMKC Punch & Die Style Hammer Hog, Top Feed, Bottom Discharge. Currently equipped with 1-1/2 screen. Capacity with 4-1/2 screen is 54,000-lbs. bark per hour. Estimated capacity with 1-1/2 screen is 17,000-lbs./hour. Includes flywheel, swing-out anvils, and 200 HP direct connected 440V motor. Infeed opening is 21 x 39-1/2. Hog weighs 13,750-lbs., without motor. Hog appears in good condition, was recently in operation, and is still installed in mill.
|
8499UU1
|
MONTGOMERY
|
One (1) Used Montgomery Hog, 60HP, Model 18FS30, , Complete With Horizontal Shaker Infeed.
|
8520N
|
NEWMAN
|
Newman Shaving with gs-100 Grinder and engine.
|
8141H
|
PENINSULA
|
One (1) Used Peninsula 42" Veneer Hog, complete with sub-base and GE 75 HP, 220-440/3/60, 1175 RPM.
|
8224R
|
Peninsula
|
One (1) Used Peninsula Veneer Hog, 42, Complete with Sub-Base, 75 Hp Motor Coupling.
|
6310
|
Pennisula
|
Pennisula Hog (Veneer) 18", 25hp
|
6309
|
Pennisula
|
Pennisula Hog (Veneer) 54", 100hp.
|
5594
|
SCHUTTE
|
MODEL 80
SCHUTTE HOG, 150Hp, HORIZONTAL FEED, BLOWER
24" Wide Spout Opening
|
5770
|
STEDMAN
|
HAMMER HOG TYPE B, 12 X 20" OPENING
|
5860
|
Stedman
|
Stedman vertical hammer hog, 18" x 12" opening, 40hp.
|
8343A
|
WEST SALEM
|
One (1) Used 2003 West Salem Machinery (WSM) Model 1652 Continuous Horizontal Feed High Torque Pallet and Wood Waste Grinder. Continuous horizontal infeed easily handles long material including pallets, slabs, edgings, veneer, and panel trim. Power feed (5 hp) roll mechanism provides metered feed. Four sided cutters are tough enough to handle nails, are easily replaceable, and stocked at factory. 16 diameter cutting drum driven by 100 hp motor provides large infeed opening. Includes starting panel. Appears in very good condition. Most high torque grinders use a ram, are not continuous feeding, and require an operator. This continuous design can run unattended with either a belt or vibrating conveyor. Screen has approximately 1-1/4 dia. holes. Hour meter shows only 4,189 hours of use. Current New price is over $90,000.00.
|
8262U
|
WEST SALEM
|
One (1) Used West Salem Model 2420BR Rigid Hammer Hog (very little use) -24" dia x 20" wide fully machined rotor, alloy steel 3-way rigid hammers (20 @ 17 # each). Hp Requirment is 150Hp. 25 Tons per hr. Fixed Hammers.
|
8554A
|
West Salem
|
One (1) Used 2003 West Salem Machinery (WSM) Model 1652 Continuous Horizontal Feed High Torque Pallet and Wood Waste Grinder. Continuous horizontal infeed easily handles long material including pallets, slabs, edgings, veneer, and panel trim. Power feed (5 hp) roll mechanism provides metered feed. Four sided cutters are tough enough to handle nails, are easily replaceable, and stocked at factory. 16 diameter cutting drum driven by 60 or 75 HP, 1200 RPM motor providing a cutting drum speed of 345 RPM. Includes starting panel.
|
8260U
|
WEST SALEM
|
One (1) Used very little West Salem Machinery Model 4254S Hammer Hog. Pulverized 42x54 Opening, Subbase (no motor). 1 wide fixed hammers and screen. Constructed using heavy steel frame with dual sliding doors for superior screen and rotor access, 44" dia. x 20" wide heavy duty rotor. New Price $ 75,000.
|
8553
|
West Salem
|
One (1) Used West Salem Machinery (WSM) Model 2852BH Horizontal Feed Hammer Hog. Includes vibrating conveyor infeed, 150 HP TEFC 460V motor, top pull-in roll and 3-sided (3-lobe) stationary hammers. Infeed12 x 52 wide.
|
8530C
|
WEST SALEM
|
One (1) Used WSM (West Salem) Horizontal Pallet Hog -Model 2852 horizontal hog with 20' long WSM vibrating infeed conveyor and powered positive feed roll system. Features 28" diameter rotor with 52" wide feed opening. Needs 200 to 300 HP electric motor.
|
8259A
|
WEST SALEM
|
One (1) Used Late Model West Salem Machinery Model 2420B Swing Hammer Hog. Constructed using heavy steel frame, alloy steel Boise type hammers (reversible 4-side) heat treated to 400BN (20 @ 7 lbs. each), replaceable wear liners drilled and tapped for mounting from outside frame with cap screws, replaceable abrasion resistant screen sections, integral metal trap, spherical roller bearings in cast steel pillow block housings and removable bearing support blocks. Vertical feed with infeed opening of 22½ X 21Ό. Includes steel grid coupling, coupling guard, and drive base for common mounting of hog and drive motor (75 HP to 150 HP recommended-not included). Typical use is for 3-5 tons per hour in pine bark with a ½ minus output. Hog is currently setup for 1 minus and would produce about 8 tons per hour. This hog was used very little and is in near new condition.
|
8072A
|
West Salem
|
One (1)West Salem Model 3240BH, Horizontal Feed Rigid Hammer Hog, 300 HP, 1200 RPM Motor and coupling. Feed opening 17" x 30-1/2".
|
8553
|
West Salem
|
One (1) Used West Salem Machinery (WSM) Model 2852BH Horizontal Feed Hammer Hog. Includes vibrating conveyor infeed, 150 HP TEFC 460V motor, top pull-in roll and 3-sided (3-lobe) stationary hammers. Infeed12 x 52 wide.
|
8464
|
WEST SALEM
|
One (1) Used West Salem Machinery (WSM) Model 2852BH Horizontal Feed Hammer Hog. Includes vibrating conveyor infeed, 150HP TEFC 460V motor, top pull-in roll and 3-sided (3-lobe) stationary hammers. Throat opening is 12 x 52 wide. Appears in good condition and was recently in service.
|
6569CC
|
Williams
|
One (1) Used Williams Hammer Hog, Super Rotor, Fixed Hammers. 30 Tons Per Hr. All Steel Fabricated; 42 X 52" Opening -250 Hp - Sub Base - "Like New" -
|
8275V
|
WILLIAMS
|
One (1) Used Williams Hammer Hog. Top-load hog with Lincoln direct drive 40 hp 3 phase 230/460 volt motor (with a 3241 frame). Includes a 22 cleated incline conveyor to a 5 vertical drop chute with clean-out. Conveyor is driven by a 1150 rpm Allis-Chalmers 5 hp 3 phase 230/460 volt motor with a Falk (model 4C2-02A-7) 17 to 1 gear reducer.
|
6105
|
WILLIAMS
|
Williams Hammer Hog Model KS30, 50lb hammers, 100hp motor.
|
9049
|
Williams
|
Williams Model C17 Hammer Hog 17 X 19 top feed, bottom discharge. 40 HP, 460 Volt 1775 RPM motor for direct connect. Swinging hammers are 2-3/8 thick. Approximate capacity is 2 tons per hour of wood or 5 tons per hour of bark. Weight without motor is approximately 4,140 lbs. Has a 4 thick by 22 diameter flywheel opposite the motor and also includes the infeed chute. The progressive grates have a nominal 2 opening.
|
8220R
|
WILLIAMS
|
One (1) Used Williams 60 X 40 Opening Hammer Hog. 6 Rows Of 110 Lbs Doubled Faced Hammers. 4 Grate Bars Complete With 500Hp Westinghouse 900 RPM Motor And Two (2) Sets Of 110#, Double Face Hammers. Hog Shows Little Ware, Good Condition.
|
5987
|
WILLIAMS
|
Williams Hog, top load with Lincoln direct drive 40 hp, 3 phase 230/440 volt motor, includes a 22' cleated incline conveyor to a 5' vertical drop chute with clean out.
|
Back
to Machinery Listings