|
|
GRINDER_KNIFE  = photo available |
| Ref# |
Make |
Description |
8356FF
|
AUTOOL
|
One (1) Used Profile Knive Grinder Autool Model PR230H, With Stylus Carousel. Very Nice.
|
8527A
|
CANTEK
|
One (1) Used Cantek Model JC-312 Cutterhead and Knife Profile Grinder. 12" length capacity. Flood coolant system with stainless steel tank. 2 HP 460 Volt Grinding Wheel motor. Two cutterhead spindles, 2-1/8" and 1-13/16" diameters. Work lamp. Built in Taiwan. Heavy construction. Appears in very good condition.
|
8086A
|
COE
|
One (1) Used COE 136 Capacity Knife Grinder. Stationary bed with moving grinding head. 5 HP TEFC wheel drive motor. 14 Diameter segmented chuck. Mechanical clamp style bar.
|
5512
|
Foley-United Model 75-12
|
12" Capacity, pattern knifes up to 12"-long possible, and handle up to 12" cutting circle. Includes pumps and accessories. Little use, near new condition.
|
6118A
|
HANCHETT
|
One (1) Used Hanchett 7.5HP, 54" Model DN Knife Grinder
|
8359A
|
HANCHETT
|
One (1) Used Hanchett Model MG-60 Heavy Duty Traveling Bed Knife Grinder, MG Model Has Front Mounted Drive Components To Eliminate Rack And Pinion Wear From Grinding Dust. Acme Bar For Planer Knives And Standard Bar For Chipper Knives On Adjacent Side Of Chuck. 14 Diameter Cup Style Grinding Wheel With Guard Mounted Wheel Dresser And Flood Coolant System. 7.5 HP Grinding Wheel Drive Motor. V And Flat Bed Ways Appear In Very Good Condition. Includes Automatic Grinding Wheel Advance And Adjustable Table Travel.
|
8474A
|
NEWMAN
|
One (1) Used Newman Model G-20, Automatic Rotary Knife Grinder for planer and chipper knives. Mounted on rotary table are four (4) 20 chipper knife fixtures and four (4) 16 planer knife fixtures will take knives 2 to 6 wide and from 1/8 to 1 thick. Outer bars are adjustable from 25 to 40 degrees. 7.5 HP TEFC 460V stone drive motor. .5 HP table drive motor, Diamond wheel dresser. Coolant tank and pump system. Floor size 42 x 43. Weight 1,800-lbs. Appears in very good condition.
|
9020
|
Reform
|
Knife Grinder Straight Reform Model 2100 Type 6
One (1) Used Reform Model 2100 Type 6 Traveling Head Straight Knife Grinder. Magnetic chuck is 2100 mm (82.6) long. Voltage is 480V. Includes controls with magnetic power source, coolant system with tank and magnetic particle separator, and bedway covers.
|
8358A
|
RODGERS
|
One (1) Used Rogers 60, Model 60NT, Heavy-Duty, Traveling Bed, Knife Grinder, 16-Diameter Insert-Type Stone. Hydraulic Carriage Feed. Hydraulic Power Package. Excellent Bedways And Good Overall Condition. Standard Mechanical Knife Bar. Ideal For Chipper Knives.
|
8088A
|
ROGERS
|
One (1) Used Rogers 60, Model 60NT, Heavy-Duty, Traveling Bed, Knife Grinder. 16-diameter insert-type stone. Hydraulic carriage feed. Hydraulic power package. Excellent bedways and good overall condition. Standard mechanical knife bar. Ideal for chipper knives.
|
5808
|
Tai Ku
|
Universal Tool Grinder,
TS-450.
|
8526A
|
UNITED TOOL
|
One (1) Used United Tool Company Model 50X Profile Knife and Cutter Grinder. 220/440-volt motor. built in 1980. Auto table traverse. Will make pattern knives from template up to 12"-long, either in or out of head. Will also sharpen milled to pattern (L-type knives) knives mounted in cutter heads (spindles extra).
|
8095A
|
UNITED TOOL
|
One (1) Used United Tool Company Model 2A Router, Cutter, and Drill Grinder. Diamond wheel for carbide tooling including router bits, pilot bits, hand plane cutters, dovetail bits, profile bits, etc. 110V electric motor.
|
8529A
|
UNITED TOOL
|
One (1) Used United Tool Co. Model 50 Heavy Duty Cutterhead Profile Grinder, Will grind patterns from templates up to 8" long. Flood coolant system. Attachment for sharpening carbide saws included. Parts and accessories are available from Foley-Belsaw. Weight is 925 lbs. 34" X 39" floor space. Appears in good condition
|
8085A
|
UNITED TOOL
|
One (1) Used United Tool Model 15-60 Traveling Head Stationary Bed 60 Knife Grinder, Mechanical knife bar. ½ HP carriage motor and 5 HP grinding wheel motor. 8 Diameter Cup Stone. Floor space 98 length, 42 width, 60 Hight. Weight is 2,000 lbs. Flood coolant system. Will grind knives up to ½ X 6.
|
8357A
|
UNITED TOOL CO
|
One (1) Used United Tool Model 15-60 Traveling Head Stationary Bed 60 Knife Grinder, Mechanical Knife Bar. ½ HP Carriage Motor And 5 HP Grinding Wheel Motor. 8 Diameter Cup Stone. Floor Space 98 Length, 42 Width, 60 Hight. Weight Is 2,000 Lbs. Flood Coolant System. Will Grind Knives Up To ½ X 6. Appears In Good Condition.
|
6280A
|
United Tool Company
|
One (1) Used United Tool Company Model 50X Profile Knife and Cutter Grinder. 220/440-volt motor. Built in 1981. Auto table traverse. Will make pattern knives from template up to 12-long, either in or out of head. Will also sharpen milled to pattern (L-type knives) knives mounted in cutter heads (spindles extra).
|
8094A
|
WADKIN
|
One (1) Used Wadkin Heavy-Duty Profile Grinder, Mach. No. 791, Test No. T35158. 220-volts, 60 Hz, 3-phase motor and starter. 9-5/8 length capacity.
|
8516TT1
|
WEINIG
|
One (1) Used Weinig Rondamat 935 Grinder, Factory Refurbished 2006. This profile knife grinder is in like-new condition. Weinig factory refurbished 2006. Motors for changing back clearance, cutter head/tool rest and side clearance. 440V/220V, variable speed 1500-3000 RPM. Straight bore shaft for grinding wheel.
|
8517TT1
|
WEINIG
|
One (1) Used Weinig Rondamat R930 Profile Grinder. 1981 model. Operational. Needs cleaning. Satisfactory for profile grinding but best used for straight knives.
|
8528A
|
WEINIG
|
One (1) Used Weinig Rondamat 931 High Precision Profile Grinder, built in 1990. 1.5 HP motor 230 volts with variable-speed. Will handle heads up to 9-1/16"-long and 11-27/64"-diameter. Includes coolant pump and reclamation system Mach. No. 931-1540. Weinig's best selling profile grinder will hold .000196 tolerances. Appears in good condition.
|
8525A
|
WEINIG
|
One (1) Used Weinig Rondamat R930 Heavy Duty Profile Grinder, Built in 1980. 9" long cutterhead capacity. Flood coolant system. Variable speed grinding wheel drive with TEFC motor. Appears in very good condition.
|
8402NN1
|
WEINIG
|
One (1) Used Profile Grinder - WEINIG - Rondamat 925, Voltage 230/460 v 60 cy, 3 Phase, Year 1995.
|
6281A
|
WEINIG
|
One (1) Used Weinig Model R930 Profile Grinder, built in 1980. 8-5/8-long pattern or cutterhead capacity. Appears in good condition..
|
8524A
|
WEINIG
|
One (1) Used Weinig Model R936 Rondamat Profile Grinder. Age 1991.
|
8096A
|
WEINIG
|
One (1) Used Weinig Rondamat 931 High Precision Profile Grinder. 1.5 HP motor 230 volts with variable-speed. Will handle heads up to 9-1/16-long and 11-27/64-diameter. Includes coolant pump and reclamation system Mach. No. 931-1540. Weinigs best selling profile grinder will hold .000196 tolerances.
|
Back
to Machinery Listings