Back to Machinery Listings

Ref#	Make	Description

DECK_EQUIP = photo available
5692	BARKO	450 STATIONARY LOG LOADER. ELECTRIC OVER HYDRAULIC. MOUNTED ON LARGE STATIONARY BSE. HAS BEEN GONE OVER WITH NEW TURRET. ALL (3) BOOM SECTIONS ARE REBUILT. CONDITION - RECONDITIONED.
6560	Cornell	Cornell Cut to Length saw with infeed deck and descrambler. Runs great with brand new motor.
8083A	Kockums	One (1) Used Kockums 20’ Heavy-Duty Floating Infeed Conveyor. Box chain-style with airbags to center log, and with pivoting hourglass roll to allow for smooth transition into the debarker ring.
8591	L & M	One Used L-M VERTICUT 2000 VPC-2000 -6-28 The Verticut 2000 saw is equipped with a 25 HP 480 volt three phase TEFC motor driving a 114” hard inlaid double ended saw bar with a spring loaded chain tensioner and an automatic oiler to lubricate the .404 pitch carbide tipped saw chain. The saw is mounted on a mandrel box that is guided by cam followers on a steel frame and raised and lowered by a hydraulic cylinder. A console with the saw controls moves with the saw assembly along a track positioned using a manual “V” wheel geared drive. The on-board hydraulic power unit has a two hp motor driving a vane pump. The saw track is 34 feet long and will cut a 26 foot package that is 48” tall and 96” wide, or multiple packages whose combined does not exceed 26 foot, while maintaining a cutting accuracy of +/- .040 inch. Machine was new in 2006 and has had very little used in excellent condition.
8589	L & M	One (1) Used L-M Equipment Model HC 150 Deck Saw. Includes 15HP 440 volt motor, DE bar with 66” clearance, 1/2HP hydraulic pump with valves, chain oiler with reservoir and pump, all mounted on common base. Appears in very good condition
8403OO1	LINDEN	One (1) Used 4 Step, 22 Degree X 8' LINDEN Log Ladder (Hydraulic Drive) - Complete As Shown- Wired With Devices, Cylinders, Valves, Lube System, Fences. Logs 4" To 30" Diameter, 8' Long (Could Be Modified To 10'), Speeds Up To 25 CPM With The Right HPU.. Built New For A Trade Show - NEVER USED IN A SAWMILL - BUILT SAME AS STANDARD UNITS SOLD ALL OVER NORTH AMERICA. . Logs 8'-9' Long, 4"-30" In Diameter. Includes Photocells In 4 Steps, Cylinders & Valves In 3 Steps, Wired To A JB, Plumbed To Valves, At 25 CPM Requires 60 GPM/60 Hp HPU. Newly Installed: Royal 14" Stroke Hydraulic Cylinder, Clevis & Base (New) And Vickers D05 Proportional Valve (New).
8016E	LINDEN	One (1) Used 10' Linden Double Acting Step Feeder. 4 steps; 4" to 20" diameter capacity. New electric drives, Rebuilt.
5687	LINDEN STEP FEEDERS	8' & 20', HYDRAULIC. CONDITION: VERY GOOD.
8012E	OPTIMIL	One (1) Used Optimil Double Length Infeed. Flying log turner w/1 set of spike rolls 4' long complete with linear positioners driven with 5 HP gearbox. Holddown rolls every 4'. First 2 rolls hourglass, All the rest are sprocket style with last 2 driven (all others are idlers). Rear of infeed with 1 pair of spike rolls (no cylinders) and holddown roll over bottom head. Infeed lift, No side shift. Bottom chain supplied by Optimil (ROA2512) complete with step flights and side guided with adjustable guide blocks c/w electric motor and Rex reducer. Trabon lube system. Very good condition.
6393	Valon Kone	Valon Kone 20' Log Singulator Model VK30-20