|
|
CONVEYOR  = photo available |
| Ref# |
Make |
Description |
8069A
|
DURA-QUIP
|
One (1) Used Dura-Quip 35”X32’ Vibrating Conveyor. Pan is 7” deep and has ¼” round hole punched plate in most of length to allow sawdust to drop outside of conveyor. Bottom frame is filled with concrete and rests on new coil springs to isolate vibration from the ground. 10 HP TEFC 460V drive motor.
|
8580
|
Dymanic Action
|
One (1) Used 48’ Dynamic Action Synchronous Frequency Vibrating Conveyor.
Conveyor is 12” wide at bottom of pan, 18” wide at top, 6” deep and is 48’ with all three sections assembled.
Pan is mounted on coil springs. Feed speed is 352 feet per minute. 230/460V motor. Appears in excellent condition without wear, dents, or cracks.
|
8417A
|
MILL POWER
|
One (1) Used 38’ Mill Power Heavy Duty Vibrating Conveyor. Width is 30” at bottom and 38” at top. Includes fiberglass section for metal detector and 8’ long sawdust drop-out section with 1-1/8” square holes. Drive is 7-1/2 HP.
|
9003
|
Mill Power
|
ONE USED MILL POWER VIBRATORY CONVEYOR
THIS UNIT IS 38 FT. LONG X 38 IN. WIDE AT THE TOP AND 30 IN. AT THE BOTTOM
COMES WITH FIBERGLASS METAL DETECTOR SECTION 5 FT. LONG AND 8 FT. LONG SAWDUST SHAKE OUT SECTION WITH 1-1/8 IN. X 1-1/8 IN. SQUARE OPENINGS.
COMES WITH 7-1/2 HP. 1740 R.P.M. MOTOR FOR ECCENTRIC DRIVE.
THIS UNIT APPEARS TO BE IN GOOD CONDITION.
|
8216R
|
SALEM
|
One (1) Used Salem Green All Steel Fabricated Green Chain 6 Strand, 50’ Long with H-78 Plastic Roof Top Mill Chain.
|
8198KK
|
SHOP FABRICATED
|
One (1) Used Chain Conveyer, Shop Fabricated. 36” x 52 ft double box link chain, S-Drive with motor. 110 box link chain.
|
8455A
|
Shop made
|
One (1) Used Belt Conveyor, 16’ Long and 9” Wide. Enclosed in 12” pipe. Comes with take-up frame and bearings. Belt is in fair condition.
|
8454A
|
Shop made
|
One (1) Used Belt Conveyor 18’ Long 24” Wide. For Light Duty application.
|
8282A
|
Shop Made
|
One (1)Used Double 110 Chain Conveyor. Driven by Falk model 10F0F3A, 37.81:1 gearbox and motor. Head and tail shafts (with take-up frames and bearings) are 3-15/16”. There is catwalk on one 42’ section. Return pan the full length of conveyor. The previous application required a center divider the length of conveyor this could be removed. Three pieces 42’, 41’ and 22’ total 115’. All components in very good condition.
|
8456A
|
Shop made
|
One (1) Used 12” wide by 20’4” Long Flat Belt Conveyor with Rough-top belt, ½ HP gearmotor and enclosed return. Approx. 45 feet per minute belt speed. Appears in good condition
|
8068A
|
Vibra-Pro
|
One (1) Used Vibra-Pro 18” X 38’ Vibrating Conveyor. Pan is 5” deep and has a sawdust drop out at the discharge end. 3 HP, 460 Volt TEFC Motor. Appears in good condition. Model FMS121200F-3/16(MS)38’-3hp, Has been cleaned and painted.
|
8363A
|
VIBRA-PRO
|
One (1) Used Vibra-Pro 18” X 38’ Vibrating Conveyor. Pan is 5” deep and has a sawdust drop out at the discharge end. 3 HP, 460 Volt TEFC Motor. Appears in good condition. Model FMS121200F-3/16(MS)38’-3hp, S/N 1015. Has been cleaned and painted
|
8376H
|
VIBRAPRO
|
One (1) Used VIBRAPRO 18" x 25" vibratory conveyor. In good condition. Ready to Ship.
|
Back
to Machinery Listings