|
|
CHIPPER  = photo available |
| Ref# |
Make |
Description |
8333H
|
ACROWOOD
|
One (1) Used Acrowood 72" Veneer Chipper - 6 knife bottom discharge system. Ready to ship.
|
6366
|
Acrowood
|
Acrowood 72" - 6 knife bottom discharge
|
8138H
|
ACROWOOD
|
One (1) Used Acrowood 72" Veneer chipper - 6 knife bottom discharge system. With or without 150 Hp drive motor. Excellent condition.
|
8518H
|
AIRASMITH
|
One (1) One (1) used Airasmith 42” Drum Chipper ( rechipper ) 45 x 42” opening, 150 Hp drive motor.
|
6363
|
Areosmith
|
Areosmith Lily Pad chipper, 42" dia. drum, 26" wide. GE 100hp, 1770 @60, 1480 @50
|
8196KK
|
BLACK CLAUSON
|
One (1) Used Black Clauson 66”, 6 Knife Veneer Chipper. 150Hp motor, V-Belt Drive; Sub-Base.
|
5578
|
Black Clawson
|
BLACK CLAWSON CHIPPER, DRUM CHIPPER 60"
|
8060A
|
BLACK CLAWSON
|
One (1) Used Black Clawson Model VCL 78” 8-Knife Horizontal Feed High Capacity Veneer Chipper. Includes infeed pressroll assembly. No motor.
|
5381
|
BLACK CLAWSON
|
72' 8 KNIFE HORIZONTAL FEED VENEER CHIPPER 150 HP MOTOR AND FEED ROLLS.
|
6367
|
Black Clawson
|
Black Clawson: 78", 6 knife, top discharge.
|
8585
|
Bush
|
One (1) Used Bush, Heavy-Duty Lilly Pad Chipper. 67" x 34" opening. Falk gearbox, but without motor, requires 75-100 HP. Capacity is up to 16-units per hour. Drum looks in good condition.
|
6610A
|
C M & E
|
One (1) Used CM&E 36” Horizontal Feed Top Discharge 10-Knife Wastewood Chipper. Will blow chips up to 300 feet and handle 12-units per hour. Complete with 75 HP motor direct
|
5510
|
C.A.E.
|
62", HORIZONTAL FEED BOTTOM DISCHARGE, 14" X 21" OPENING, RECONDITIONED
|
8578
|
Carthage/CM&E
|
Whole log Chopper-Carthage-CM&E 96"-800 Hp motor & starter 2300 volt Prim. Just ot of service, hor feed, bottom discharge. 70 ton per hour.
|
5804
|
CM&E
|
48", 8 Knife, TF, TD,
300 Hp Motor, 440/3/60
|
8479A
|
CM&E
|
One (1) Used CM&E Drop Feed Top Discharge 10-Knife Rechipper. Also suitable for small trim blocks. Will blow chips up to 300 feet and handle 12 units per hour. Direct coupled to 75 HP, 1200 RPM, 440 Volt drip-proof motor. Appears in good condition.
|
6102
|
FORANO
|
Forano 58" horz. feed chipper. "J" spout, 8 knife, rear or bottom discharge.
|
8058A
|
KOCKUMS
|
One (1) Used Kockums 58-Inch, 6-Knife, Horizontal Feed, Oversized Spout, Bottom Discharge Chipper. Will handle a 30” slab or 15” round. 22” x 24” spout
|
9040
|
Kockums/Soderhamn
|
KOCKUMS/SODERHAMN 58 IN. CHIPPER SIX (6) KNIFE BIG MOUTH - HORIZONTAL FEED - BOTTOM DISCHARGE COMES WITH A 8 GROOVE 27 IN. DRIVE SHEAVE.
|
8468N
|
MORBARK
|
One (1) Used 48" Mobark Chipper, 3 knife, 75hp Motor, 5x5 screen, blower.Operational manual and parts list included.
|
8434A
|
MORBARK
|
One (1) Used Morbark 75”, 2-Knife, Whole Log, Horizontal Feed, Bottom Discharge Chipper. 22” round log capacity.
|
8433A
|
MORBARK
|
One (1) Used Morbark 75", 3-Knife, Whole-Log, Horizontal Feed, Bottom Discharge Chipper. 22" round log capacity, length-83”, width-81”, height-84”, weight-15,600 lbs, spout-32” diagonal X 25” wide, disc diameter-75”, maximum RPM’S-550, feed rate with ¾” chip size is 94 feet per minute. No motor. Appears rusty but in good condition. Includes Pulley.
|
9054
|
MORBARK
|
Morbark 58” 6-Knife Chip-Pac complete with 6’ X 6’ Double Deck Chip Screen, Cyclone Overs Return, 150 HP 220/440 volt motor, and 7-1/2 HP 220/440 volt TEFC motor on screen. Chipper spout measures 22” wide and 32” diagonal with a roundwood capacity of 15”. Also includes motor starters attached to Chip-Pac for easy installation. Unit has been only lightly used and looks in good condition.
|
8583
|
Morbark
|
One (1) Morbark 48” Chip Pac One-Piece Chipping and Screeni48” horizontal feed top discharge 3-knife chipper, new 5’ diameter cyclone, and 5’ X 5’ rotary chip screen. System will produce 5 to 8 tons per hour from logs up to 11” diameter or slabs up to 17” wide. 60 HP 230/460V electric motor on chipper, 2HP on screen. Chip Pac has new anvils, feed plate, and has been checked for disc run out and bearingsng System, Model 3-48,
|
8059A
|
NICHOLSON
|
One (1) Used Nicholson 72” x 84” Roto Drum Chipper. 96” x 84” top feed opening. Recently rebuilt drum and anvil area. Requires approximately 600HP (motor not included). Will produce an average of 28 units (157 cubic meters) per hour.
|
8056A
|
NICHOLSON
|
One (1) Used Nicholson 38" x 23" Rechipper for overs, slivers, and trim blocks. 64-knife drum will produce up to 11.3 units, or 64 cubic meters per hour. Bottom screen insures against overs. 100 HP motor, 230/460-volts, with sheaves. Includes grinding fixture to fit standard grinder.
|
8480A
|
NICHOLSON
|
One (1) Used Nicholson 38" x 23" Rechipper for overs, slivers, and trim blocks. 64-knife drum will produce up to 11.3 units, or 64 cubic meters per hour. Bottom screen insures against overs. 100 HP motor, 230/460-volts, with sheaves. Includes grinding fixture to fit standard grinder. Appears in good condition, but has been idle for a number of years..****Includes shop checked with New Bearings
|
6517A
|
Nicholson
|
64-knife drum will produce up to 11.3 units, or 64 cubic meters per hour. Bottom screen insures against overs. 100 HP motor, 230/460-volts, with sheaves. Includes grinding fixture to fit standard grinder.
|
8057A
|
NICHOLSON
|
One (1) Used Nicholson Model 55 Lilly Pad Chipper. 57” x 36” infeed opening. Good drum. No pulley or motor.
|
8066A
|
PRECISION
|
One (1) Used 1991 Precision 96” Model 96.27 Horizontal Feed, Side Discharge, 4-Knife Whole Log Chipper with many options that were extra cost at time of original purchase, including: Current new cost is approximately $133,000. plus the hydraulics. Chipper has not run heavy production and appears in very good condition. Many spare parts and knives included. Weight is 35,000 lbs. Average production capacity is 200 tons per hour.
8” thick chipper disc,Built-in disc brake, Extended front shaft for hydraulic starter. Hydraulic starter with hydraulic power pack
Side discharge pipe with motorized outlet adjustment.
Option Motor and Starter: Westinghouse 800 HP, 400 RPM, 4160 Volt, Synchronous motor with electronic starter. Late model unit.
|
6154A
|
Precision
|
One (1) Used Late Model Precision 48”, 6-Knife, Drop Feed, Bottom Discharge Chipper,. Key Knife conversion using quick-change disposable knives. 100 HP motor and v-belt drive. Spout is 16-3/4” x 17”. Chipper and motor mounted on common base.
|
8391LL1
|
PRECISION
|
One (1) Used Precision Chipper, 100 HP, 48” , 6 knife head with 11” round wood capacity or 18” board capacity. 100’ Webster shaker trays available. This machine is in first class condition.
|
9038
|
Precision
|
PRECISION 48 IN. CHIPPER DROP FEED - BOTTOM DISCHARGE - SPOUT IS 16-3/4 IN. X 17 IN. SIX KNIFE WITH A KEY KNIFE CONVERSION INSTALLED COMES WITH 100 HP. - 870 R.P.M. CENTURY MOTOR - BELT DRIVEN WITH A 21 IN. SHEAVE - BELTS AND BELT GUARD. CHIPPER AND MOTOR ARE MOUNTED ON ONE COMMON SUB BASE.
|
8323AA
|
PRECISION
|
One (1) Used Precision 48” Chip Pack mounted on frame; 3 Knife, 75Hp. With 5’ x 5’ rotating Chip Screen, and Cyclone. Also including, new hood over disc, new custom made square to round transition piece out of chipper made 12" longer than original, new round 90 degree elbow, 12" custom made extensions on screen legs, Webster vibrating conveyor transition piece to feed into chipper, fines blower and motor, 6 groove v-belt drive with 75 HP motor, Phelps blower with no motor, carbide anvil and counterknives. The 12" extensions on screen and transition piece allowed us to raise the screen up so that we could use a belt underneath the screen outlet. The chipper has been serviced yearly by a professional chipper maintenance team. Ready to Ship
|
8171A
|
PRECISION
|
One (1) Used Precision 48” Horizontal Feed, Top Discharge 6-Knife Wastewood Chipper,. Spout is 18” X 24” and will handle a 24” slab or 11” round wood. Chipper appears in excellent condition with no wear on disc or base
|
9014
|
Precision
|
One (1) Used 1989 Precision 118" 6-Knife Horizontal Feed Bottom Discharge Whole Log Chipper.
Complete with two (2) 600 HP 2,300 volt motors, V-belt drives, motor bases, electric starting equipment, hydraulic chipper starter with rubber tire and cylinder, spare 600 HP motor, and spare chipper parts. Equipment is in good condition. See photos on our web site.
|
8169A
|
PRECISION
|
One (1) Used Precision 48” Horizontal Feed, Bottom Discharge 6-Knife Wastewood Chipper. Equipped with “Key Knife” disposable chipper knives. Spout will accept 11” roundwood or 24” slabs.
|
8344A
|
PRECISION
|
One (1) Used 1989 Precision 118” 6-Knife Horizontal Feed Bottom Discharge Whole Log Chipper. Complete with two (2) 600 HP 2,300 volt motors, V-belt drives, motor bases, electric starting equipment, hydraulic chipper starter with rubber tire and cylinder, spare 600 HP motor, and spare chipper parts. Equipment is in good condition.
|
6567A
|
Precision
|
One (1) Used Precision 75”, 6-Knife, Horizontal Feed, Bottom Discharge Wastewood and Whole Log Chipper. Will accept 22” round log. Capacity of approximately 100 metric tons per hour, with spout 3/4 full. Spout is 22” x 27”. Weight is 15,500-lbs. Operating RPM is 560. Requires 500 HP for maximum production, motor not included.
|
9039
|
Precision
|
PRECISION 38 IN. CHIPPER C-1011 HAS NEW FANS - COUNTER KNIVES - ANVIL AND FEED PLATE OVER ALL MEASUREMENTS IS 44 IN. FRONT TO BACK X 50 IN. LEFT TO RIGHT X 46 IN. HIGH - GOOD CONDITION.
|
9037
|
Precision
|
PRECISION 48 IN. DROP FEED – SIX (6) KNIFE – TOP DISCHARGE CHIPPER WITH A WESTINGHOUSE 50 HP. – 1770 R.P.M. – ODP MOTOR MOUNTED ON A COMMON SUBBASE – BELT DRIVEN WITH A 14 IN. DRIVE SHEAVE TO A 28 IN. DRIVEN SHEAVE – 5 “V” – SIX (6) GROVE DRIVE BELT; HAS A 12 IN. DIAMETER TRANSITION ON THE DISCHARGE AND APPROXIMATELY 3 FEET HAVE BEEN ADDED ON TO THE INFEED SPOUT. SPOUT OPENING WILL ACCOMMODATE An 11 IN. ROUND WOOD OR UP TO A 24 IN. WIDE SLAB. THE DISK RUN OUT IS WITHIN A .005 TIR – THIS MACHINE IS SERVICEABLE HOWEVER WE WOULD RECOMMEND A NEW FACEPLATE.
|
8064A
|
PRECISION
|
One (1) Used Precision 48” Horizontal Feed, Top Discharge, 6-Knife Wastewood Chipper. Includes 100 HP 440 Volt electric motor, V-belt drive, and belt guard. Spout opening is 18” X 16-3/4” and will handle up to 24” slab or 11” round wood.
|
5677
|
SODDERHAM
|
58", HORIZONTAL FEED, BOTTOM DISCHARGE, 8-KNIFE.
|
5975PP
|
SODERHAM
|
One (1) Used Soderham Chipper, 150 HP, Westinghouse 1800Rpm 6' wheel - carbide cutter knives.
|
8065A
|
Soderhamm/Kockums
|
One (1) Used Soderhamn/Kockums 58”, 6-Knife, Horizontal Feed, Top Discharge, Oversized Spout Wastewood Chipper. Will handle a 30” slab or 15” round. 22” X24” spout.
|
8230VV
|
SODERHAMN
|
One (1) Used Soderhamn 60" trim-log Chipper (Right Hand).
Model number -60;
with 150 H.P-1200 R.P.M.-440 volt -3 phase motor. Frame -1505; Rhis Chipper is a bottom discharge.
|
8584
|
West Salem Machinery
|
One (1) Used West Salem Machinery 58” 8-Knife Horizontal Feed Bottom Discharge Wastewood Chipper, S/N 102192, built in 1992. 20” wide X 22-1/2" tall spout. Chromed face plates and knife clamps. Good disc. Includes a large supply of rebuilt and new spare parts
|
5884
|
West Salem Machinery
|
One (1) Used West Salem Machinery 58” 8-Knife Horizontal Feed Bottom Discharge Wastewood Chipper, S/N 102192, built in 1992. 20” wide X 22-1/2" tall spout. Chromed face plates and knife clamps. Good disc. Includes a large supply of rebuilt and new spare parts
|
Back
to Machinery Listings