Back to Machinery Listings

CARRIAGE = photo available
Ref#	Make	Description
6612A	Corley	One (1) Used Late Model 1993 Corley Heavy Duty 3-Block Linear Positioner Carriage. 40” Headblock opening. Knee spacing is 5’-6” & 9’. 16’ outside bunk measurement. 27½” from top of rail to top of bed plates. Overall length and width is 21’ X 10’. 17” diameter wheels on five (5) axels. Flat wheels are plastic. 66” rail spacing. Approximately 65’ of rail in good condition. Vickers valves on linear cylinders. Two (2) scissor or “Tong” dog assemblies. Three (3) Brownsville Turners. Sic (6) Retractable board dogs. Hydraulic pantograph and accumulator included. No controls or HPU. Appears in very good condition
5590	FILER & STOWELL	FILER & STOWEL 42" X 16' CARRIAGE. AIR DOG. HOOK DOGS. SILVITECH COMPUTERIZED SET WORKS. LARGE SUPPLY OF SUPPLEMENTAL CARRIAGE PARTS. INCLUDING CYLINDERS, MOTORS, FACE PLATES, BEARINGS, ETC.
6120LL	SALEM	One (1) Used Salem Carriage, 42", 3 block, lineal positioners. No track, rails or optimization system.
8051A	TYRONE	One (1) Used Tyrone Berry Model SMA-240/230 Hydraulic Carriage Drive. For carriages between 3,000- and 14,000-lbs., from 9 to 14 – 20’ lines per minute. Includes SMA-240 pump package with 100 HP, 1800 RPM, 1500-PSI pump, control valve, oil cooling radiator, and reservoir. Also with Model 230 cable drum package including drum, hydraulic motor, and roller chain drive. System may be used at either end of track or below.
8049A	TYRONE	One (1) Used Tyrone Berry Model SMA-230 Hydraulic Carriage Drive. For carriages between 3,000- and 14,000-lbs., from 9 to 14 – 20’ lines per minute. Includes pump package with 100 HP, 1800 RPM, 1500-PSI pump, control valve, oil cooling radiator, and reservoir. Also with cable drum package including drum, hydraulic motor, hydraulic cable tightener, and roller chain drive. System may be used at either end of track or below.
8048A	TYRONE	One (1) Used Tyrone Model HCT-230 Dual Cable Tightener Assembly Complete with 5 HP Hydraulic Power Unit with Accumulator. Cable sheaves have been replaced with 32” O.D. units built by Salem Equipment Co.
8050A	TYRONE	One (1) Used Tyrone Berry Model SMA-385-C Hydraulic Shotgun Carriage Drive, S/N A2703. Two (2) 150 HP, 440-volt motors driving two (2) pump packages, furnished along with hose assemblies, couplings, carriage bracket, piston rod guides, mounting base, pipe, and fittings. System weighs approximately 17,000-lbs., is designed to handle carriages between 20,000- and 60,000-lbs., is regenerative (recaptures up to 85% of stopping energy to use on the next acceleration cycle), and will produce 15 lines per minute on a 20,000-lb. carriage.