Back to Machinery Listings

Ref#	Make	Description

BARKER = photo available
6597A	Bradson	One (1) Used Bradson 18", 6-Tool, Ring Debarker. Hydraulic ring centering; 40 HP ring drive motor. Tool tensioning with air bags in ring. Feed drive is 10 HP, 2-speed. Barker appears to have been recently rebuilt, but not installed. Feed speed up to 230FPM. Can easily be truck mounted for portable use. 7’10” wide x 8’ 6” long x 8’ high.
8006E	BRUNETTE	One (1) Used 43" Brunette Ring Debarker. Mark IV, Air seal, Alligator style chain c/w dual hourglass holddowns (infeed & outfeed), 50 HP feed drive, 150 HP ring drive
8427JJ1	CAMBIO	One (1) Used Cambio 18” Ring Debarker. Complete With 6 Tool Ring.
8432E	CAMBIO	One (1) Used 18" Cambio Debarker. No tire guide rolls. Rebuilt as new in Eastern Canada - 575/3/60 motors.
8431E	CAMBIO	One (1) Used 18" Cambio Debarker. Tire guide rolls, 474/360 motors. 50Hp main motor ring- Rebuilt by MUS Inc. and has never been installed in a mill but has been outside for one year and paint must be redone. 575/3/60.
8430E	CAMBIO	One (1) Used 18" Cambio Debarker. Infeed and outfeed sets of rolls with hydraulic motors. 50Hp main motor ring - Hydraulic power unit with 60 HP motor, tank and 45 GPM, 575/3/60.
8428E	CAMBIO	One (1) Used 18" Cambio Debarker. Capacity 2-1/2" Diameter To 18" Diameter. Comes With Motors, 460 Volt, 6 Tool Rotor. Infeed And Outfeed Triangular Feedworks. Fairly Good Condition.
8429E	CAMBIO	One (1) Used 18" Cambio Debarker. Capacity 2-1/2" diameter to 18" diameter. Infeed tire guide rolls, Infeed triangular feedworks comes with air cylinder; Five (5) tool ring c/w hydraulic tool tensioning system, Outfeed triangular feeds comes with air cylinder. 50 HP ring drive assembly (460 volt / 3 phase / 60 hertz). Electric feedworks drive and Miscellaneous spare parts.
8342EE1	CAMBIO	One (1) Used Cambio 26’ Ring Debarker. 75Hp Drive. Rebuilt, In storage Ready to ship
8362JJ1	CAMBIO	One (1) Used Cambio 18” Ring Debarker. Complete With 6 Tool Ring, Spider Tension System, 50 hp Ring Motor, and Feedworks Drive. Rebuilt.
9036	Cambrio	KOCKUMS 24” 5-TOOL HIGH SPEED HYDRAULIC DRIVE CAMBIO RING DEBARKER. DIRECT HYDRAULIC DRIVEN FEEDROLLS ELIMINATE RIGHT-ANGLE GEAR BOXES. RING HAS BEEN CONVERTED TO AIRBAG STYLE BY LINDSAY AS WELL AS THE TOOL ARMS AND TIPS. INCLUDES HYDRAULIC PUMP PACKAGE, INFEED SHORT LOG HOLD DOWN ASSEMBLY, AND LOTS OF NEW SPARE PARTS. FEED SPEEDS UP TO 220 F.P.M. WILL DEBARK LOGS FROM 31/2” TO 24” DIAMETER AND DOWN TO 8’ LENGTHS. RING DRIVE MOTOR IS 75 HP.
8426E	FORANO	One (1) Used 18" Forano Debarker with 5 tools rotor. Capacity of 2-1/2" to 18" - Standard infeed speed - 180' FPM. Rotor statically balanced, Rotor powered by 50 HP motor included, 575/3/60, Rotor mounted on ball bearings and spring steel races. -Six (6) infeed spike rolls with direct coupled hydraulic motor. -Six (6) outfeed spike rolls with direct coupled hydraulic motor. - Two (2) air cylinders with valves for quick opening of spike rolls. Includes: Feedworks hydraulic power unit and Air bag tool tensioning system. Good condition.
8425E	FORANO	One (1) Used 18" Forano (Cambio) Debarker. Five (5) tool ring. Hydraulic tension system c/w rubber bands. Triangular infeed and outfeed spiked feedrolls. Pneumatic tension system for spiked feedrolls c/w air cylinder and control valve. 50 HP ring drive motor, 575/60/3
8521N	HMC	One (1) Used HMC Debarker, less hydraulic pack, 50Hp Motor
8519N	MORBARK	One (1) Used Morbark PS-8, Post Peeler. Infeed Deck, Infeed and Outfeed Rollers.
8477N	MORBARK	One (1) Used PS8 Morbark Post Peeler. Includes 2 Stand Infeed Deck, Hydraulic Power Pack, Infeed To Ps8, Outfeed To Hourglass Rolls, Incline Chian To To Stacking Chain, Transfer, Live Deck , 4 Or 5 Hoppers To Stacks, Barn Sweep With Incline To Remove Waste. Complete photo package with final product photo.
8351HH1	MORBARK	One (1) Used Morbark 640 Debarker. (Like New - Only 7 hours use), 40 ft stand deck, 25 foot infeed, 25 foot outfeed hydraulic conveyors, 25 ft stacker. All electric over hydraulic. Cab with AC/Heat. Good Condition.
9035	Nicholson	NICHOLSON 22" MODEL A-5 DEBARKER – LEFT HAND, REMOTE AIR SEAL TOOL ARM CONTROL - 6 TOOL ARMS – 300 PLUS FEET PER MINUTE – REPLACEABLE FIBER GUARD FEED ROLLS – ALL AIR CYLINDERS HAVE BEEN REBUILT – NEW ASTOLOY MAIN FEED COLUMNS – RING HAS BEEN DISASSEMBLED – INSPECTED AND REBUILT WITH NEW BUSHINGS – SEALS, BELTS AND MAIN RING BEARING CHECKED – 100 HP RING DRIVE – TWO SPEED FEEDWORKS 40 HP AND A 30HP – RING SLIDE OUT - ANY PARTS THAT DID NOT HAVE A 80% OR GREATER SERVICE LIFE HAS BEEN REBUILT OR REPLACED – GEARS ARE 80% PLUS. ALSO INCLUDED IS PLC WITH PROGRAMMING – ALL ELECTRICAL TO A MAIN "J" BOX – TWO DAYS START UP ASSISTANCE.
9025	Nicholson	Nicholson Model A5 22" Ring Barker (reconditioned with new ring bearings and all factory updates).
8411E	NICHOLSON	One (1) Used 27" Nicholson A5 LH Debarker. Air seal ring, Ring bearing (replaced one (1) month prior to removal), 75 HP motor, No console, No starters, No spare parts.
6656E	Nicholson	Centering infeed conveyor on air bags with independent overhead tires - 6 tool rotor with air bags (c/w 2 sets cedar tool arms, 1 set standard tool arms) - Not available until June30, 2005 - c/w service and parts manuals
8412E	NICHOLSON	One (1) Used 27" Nicholson A2 Debarker. - 5 arm, Ring drive motor, Feedworks drive motor. Still installed in sawmill. Photos available upon request.
8410E	NICHOLSON	One (1) Used 27" Nicholson A5 LH Debarker. Air seal ring, Ring pull out on right hand side (gears on left), Ring drive, Feedworks drive, Auto lube system and Spare tool arms.
8494E	NICHOLSON	One (1) Used 22" Nicholson A7 RH Debarker. - Heavy duty main frame - Air seal ring c/w drive motor - Ring pull out on left hand side - Four (4) infeed and four (4) outfeed feedrolls - c/w hydraulic power unit - Estimated weight 56,000 lbs.
8408E	NICHOLSON	One (1) Used 27" Nicholson A5 LH Debarker, 1991,- Air cell rotor (pulls out to right) Auto lube, Main rotor drive motor, Feedworks drive, HPU for ring pull out. Operator's console & controls have been removed.
8495E	NICHOLSON	One (1) Used 27" Nicholson A7 LH Debarker. - Heavy duty main frame - Air seal ring c/w drive motor - Ring pull out on left hand side - Four (4) infeed and four (4) outfeed feedrolls - c/w hydraulic power unit - Estimated weight 56,000 lbs.
8252A	NICHOLSON	One (1) Used Nicholson 44" Model A2, 5-Arm Debarker. Air-Operated Hold Down Rolls, Hydraulic Ring Centering, AC/DC Feedworks Drive, 2-Speed Ring Drive Motor And Operators Control Console. Feed Speeds To 140 FPM. Minimum Log Diameter 4.5-Inches. High Lift For Large Log By-Pass. Air Seal Ring With Remote Tool Tension. Tool Arms, Tool Arm Shafts And Tool Arm Bushings Have Been Recently Replaced. Approximate Weight 60,000-Lbs. Without High Lift, Debarker Measures 11’-Wide X 18’-Long X 18’-High.
8008E	NICHOLSON	One (1) Used 35" Nicholson A1 Rebuilt Debarker. Six (6) tool air seal ring, 100 HP ring drive, 30 HP feedworks drive. Two (2) infeed bedrolls c/w two (2) overhead pressrolls c/w lift cylinder Two (2) outfeed bedrolls c/w two (2) overhead pressrolls c/w lift cylinder Hydraulic power unit.
8409E	NICHOLSON	One (1) Used 27" Nicholson A5 LH Debarker. Mid 1980's, rebuilt by current owner to install into one of the sawmills and plans have changed. Air seal rotor, Auto lube, No rotor drive motor, No feedworks drive. Ready to load.
8329AA1	NICHOLSON	One (1) Used Nicholson Debarker Model A5, Capacity 22 ''. 6 knives to air pressure of type Air Cell. Operating speed: 275/325' per minute. Rotational speed of the ring: 250rpm; main Motor 100hp, Drive motor 40Hp. Voltage: 600, Very good condition.
8204E	NICHOLSON	One (1) Used 22" Nicholson A5 Debarker. Air cell rotor, Auto lube. Main rotor drive motor; Two (2) speed Feedworks drive. HPU for ring pull out. Note: Has been rebuilt by current owner.
8251A	NICHOLSON	One (1) Used Nicholson 35” Model A-2 Ring Debarker. Air Seal 5-Tool Ring With Remote Controlled Tool Arm Tension. Automatic Hydraulic Ring Centering. Air Tensioned Infeed And Out Feed Press Rolls Will Handle 8’ Logs At Up To 160 Feet Per Minute. Includes Ring Drive Motor, Feed Works Drive, 20 HP Hydraulic Power Unit, Operator’s Control Booth And All Debarker Controls.
8350HH1	PETERSON	One (1) Used 2004 Peterson Pacific 4800E Debarker. Cat C9, 350Hp, feed opening 23”x48”, 2 Flail Drums, Production output (3) 25 tons loads per hour +/-, one owner, well maintained, very good condition.
8278C	SODERHAMN	One (1) Used SODERHAMN 14" Cambio Debarker - Standard 14" Cambio Ring Debarker With 3 Pineapple Feed Rolls On Each Side, 5 Tool Arms, Band Type Tool Tension, Mechanical Drive. Good Used Condition.
8377JJ1	VK BRUNETTE	One (1) Used VK Brunette 21” Ring Debarker. Mark IV Complete With: 6 Tool Ring, 75 hp , 460v Ring Motor; Feedworks Drive, VK Floating Infeed Conveyor ( No Chain ), 1 Spare Feedroll and - Misc. Spare Parts.